BUILDING AND CONSTRUCTION SEALANTS

  • useal907
    One-part, non-sag polyurethane construction sealant.

    U-Seal 907 is a permanently elastic, one component, gun grade polyurethane construction sealant. It is a low modulus sealant with excellent adhesive properties and resistance to ageing and weathering. U-Seal 907 is designed for the sealing of vertical expansion and construction joints.

    • Accommodates joint movement of +/- 25%
    • Permanently elastic over a wide range of temperatures
    • Easy to gun, easy to tool
    • Good adhesion on all typical construction materials
  • • Standard Colours (Full color range is available on customer request) White, Grey, Black
    • Cure rate (23°C and 50% r.h.) Full cure at 6mm deep is 2-3 days

    3' - 6'

    • Shore A (23°C and 50% r.h.)

    25

    • Tack-Free Time (23°C and 50% r.h.) 120' - 40'
    • Elastic modulus at 100% extension (ISO 37DIN 53504) ≥ 0,4 N/mm2
    • Elongation (ISO 37DIN 53504) ≥ 700%
    • Joint movement capability +/- 25%
    • Application Temperature from +5 to +40 (°C)
    • Temperature Resistance (after curing) -40 / +90 (°C)

    Packaging
    310 ml cartridge; 400/600 ml sausage; 200 lt drum;
     
  • useal907 01 useal907 02
    Certificates and compliances:
    ISO 11600/F/25LM, DIN 18540/F, ASTM C920-11
    (building construction sealants: classification and requirements)
    BS 6920-1:2000
    (suitability for use in contact with water for human consumption)
    ASTM C920, Type S, Grade NS, Class 25, Use NT DIN 11431
    (various standards on joint sealants)
  • simpseal20
    One-part Hybrid polymer low modulus construction sealant.
    Free of solvent and isocyanates.


    SiMP®-Seal 20 is a one-part Silyl-Terminated Polymer permanently elastic construction sealant. It is a low modulus sealant with excellent adhesive properties and resistance to ageing and weathering. Suitable for sealing of expansion and construction joints in vertical and horizontal applications.

    • No bubble formation. Odorless
    • Permanently elastic over a wide range of temperatures
    • Accommodates joint movement of +/- 25%
    • Easy to gun, easy to tool
    • Good adhesion on all typical construction materials
    • Excellent resistance to ageing and weathering
  • • Colours White, Grey, Black
    • Curing rate (1 day at 23°C and 50% r.h.) 2 mm/24h
    • Shore A (23°C and 50% r.h.) 20
    • Tack-Free Time (23°C and 50% r.h.)
    120' - 140'
    • Elastic mudulus at 100% (ISO 37 DIN 53504) ≥ 0,4 N/mm2
    • Elongation (ISO 37 DIN 53504) ≥ 600 %
    • Joint movement capability 25%
    • Application Temperature from +5 to +40 (°C)
    • Temperature Resistance (after curing) -40 / +90 (°C)

    Packaging
    290 ml cartridge; 400/600 ml sausage; 200 lt drum;
     
  •  

    simpseal20 01 simpseal20 02

    Certificates and compliances:

    ISO 11600/F/25LM, DIN 18540/F, ASTM C920-11
    (building construction sealants: classification and requirements)

    BS 6920-1:2000
    (suitability for use in contact with water for human consumption)

    ASTM C920, Type S, Grade NS, Class 25, Use NT DIN 11431
    (various standards on joint sealants)
  • useal500
    Polyurethane multipurpose sealant and elastic adhesive.

    U-Seal 500 is a high performance, dual purpose adhesive and sealing compound with permanent elasticity. It bonds well to a wide variety of substrates and enables permanent elastic sealing with high adhesive strength between most common metals, painted surfaces, GRP, PVC and other rigid plastics.

    • One-component polyurethane
    • Permanently flexible and stable
    • Bonds and seals at the same time
    • Over-paintable
  • • Colours White, Grey, Black
    • Curing rate (1 day at 23°C and 50% r.h.) 3 mm/24h
    • Shore A (23°C and 50% r.h.) 40
    • Tack-Free Time (23°C and 50% r.h.)
    50'
    • Elastic modulus at 100% (ISO 37 DIN 53504) ≥ 0,8 N/mm2
    • Tensile strength (ISO 37 DIN 53504)
    ≥ 1,8 N/mm2
    • Elongation (ISO 37 DIN 53504) ≥ 450%
    • Application Temperature from +5 to +40 (°C)
    • Temperature Resistance (after curing) -40 / +90 (°C)

    Packaging
    310 ml cartridge; 400/600 ml sausage; 200 lt drum;
     
  •  

    useal500 01            useal500 02
  • simpseal30
    One-part Hybrid polymer non-sag sealant and elastic adhesive.
    Free of solvent and isocyanates.

    SiMP®-Seal 30 is a one-part Silyl-Terminated Polymer elastic sealant suitable for all applications in industry and construction. SiMP®-Seal 30 can be used in the building industry for sealing and joining a variety of materials including joints in sheet metal fabrication, duct-work and general fabrication.

    • Odorless
    • No bubble formation
    • Primerless adhesion on almost all substrates
    • Excellent weathering resistance, color stability and UV resistance
    • Easy tooling with excellent surface appearance
    • Neutral behavior, does not attack substrate
    • Paintable
  • • Colours White, Grey, Black
    • Curing rate (1 day at 23°C and 50% r.h.) 3 mm/24h
    • Shore A (23°C and 50% r.h.) 35 - 40
    • Tack-Free Time (23°C and 50% r.h.)
    35' - 40'
    • Elastic mudulus at 100% (ISO 37 DIN 53504) ≥ 1,2 N/mm2
    • Tensile strength (ISO 37 DIN 53504)
    ≥ 2,8 N/mm2
    • Elongation (ISO 37 DIN 53504) ≥ 450 %
    • Application Temperature from +5 to +40 (°C)
    • Temperature Resistance (after curing) -40 / +100 (°C)

    Packaging
    290 ml cartridge; 400/600 ml sausage; 200 lt drum;
     
  •  

    simpseal30 001 simpseal30 02

    Certificates and compliances:

    ISO 11600/F/25HM, ASTM C920, Type S, Grade NS, Class 25, Use NT
    (building construction sealants: classification and requirements)
  • useal907
    One-part, self-leveling polyurethane sealant.
    Resistant to hydrocarbons, oils and fuels.


    U-Seal 816 is an elastic one component self-leveling polyurethane sealant specifically designed as a multipurpose floor joint sealant or in applications where a high chemical resistance to fuels, oils and hydrocarbons is requested. It is a high modulus sealant with excellent resistance to ageing and weathering. U-Seal 816 is intended for the sealing of horizontal floor joints and for joints in concrete on or below grade; its self-leveling consistency enhances application and avoids the need for tooling.

    • One part - no mixing on site
    • Accommodates joint movement of +/- 25%
    • Excellent resistance to many chemicals and to abrasion
    • Very good adhesion to concrete, metals, ceramic tile, stone and other flooring materials
  • • Standard Colours (Full color range is available on customer request) Grey
    • Shore A (23°C and 50% r.h.)

    26

    • Tack-Free Time (23°C and 50% r.h.) 60' - 80'
    • Elastic modulus at 100%  (ISO 37DIN 53504) ≥ 0,4 N/mm2
    • Tensile strength (ISO 37DIN 53504) ≥ 1,8 N/mm2
    • Elongation (ISO 37DIN 53504) ≥ 750%
    • Joint movement capability +/- 25%
    • Application Temperature from +5 to +40 (°C)
    • Temperature Resistance (after curing) -40 / +90 (°C)

    Packaging
    600/1800 ml sausage; 7 Kg bag; 200 lt drum; 20lt. pail;
     
  • useal816 01 useal816 02
    Certificates and compliances:
    ISO 11600/F/25HM ASTM C920 Type S, Grade P, Class 25, Use T1 and I
    (building construction sealants: classification and requirements)
    BS 5212
    (resistance to heat ageing and fuel immersion)
    EN 14187-5, ASTM C1247
    (resistance to hydrolysis for cold applied joint sealants)
  • useal907
    One-part, self-leveling polyurethane sealant.
    Resistant to hydrocarbons, oils and fuels.


    U-Seal 816 T is a permanently elastic, one component, gun grade polyurethane sealant specifically developed to be used as a multipurpose vertical joint sealant in applications where a high chemical resistance to fuels, oils and hydrocarbons is requested. It cures under the influence of atmospheric moisture to form a low modulus sealant with excellent adhesive properties and resistance to ageing and weathering.

    • Permanently elastic over a wide range of temperatures
    • Accommodates joint movement of +/- 25%
    • Easy to gun, easy to tool
    • Good adhesion on all typical construction materials
    • Excellent resistance to ageing and weathering
    • Excellent resistance to many chemicals and to abrasion
  • • Standard Colours (Full color range is available on customer request) White, Grey, Black
    • Cure rate (23°C and 50% r.h.) Full cure at 6 mm deep is 2 - 3 days

    2 mm/24h.

    • Shore A (23°C and 50% r.h.)

    25

    • Tack-Free Time (23°C and 50% r.h.) 120' - 140'
    • Elastic modulus at 100%  (ISO 37DIN 53504) ≥ 0,4 N/mm2
    • Elongation (ISO 37DIN 53504) ≥ 700%
    • Joint movement capability +/- 25%
    • Application Temperature from +5 to +40 (°C)
    • Temperature Resistance (after curing) -40 / +90 (°C)

    Packaging
    310 ml cartridge; 400/600 ml sausage; 200 lt drum;
     
  • useal816t 01 useal816t 02
    Certificates and compliances:
    ISO 11600/F/25HM ASTM C920 Type S, Grade P, Class 25, Use T1 and I
    (building construction sealants: classification and requirements)
    BS 5212
    (resistance to heat ageing and fuel immersion)
    EN 14187-5, ASTM C1247
    (resistance to hydrolysis for cold applied joint sealants)
  • uprimer110
    Moisture-curing primer for porous surfaces.

    U-Primer 110 is a one-part polyurethane primer used to promote adhesion of U-Seal sealants to porous surfaces such as e.g. concrete, plaster, cement, drywall, gypsum, wood and plywood. The product penetrates the substrate, reinforces it, and eliminates residual dust. A thin layer of Primer110 is enough for the substrates to be sealed. In case of very porous surfaces U-Primer 110 should be applied in 2 coats.

    • Primer 110 has a consumption of about 100 – 200 g/m² (0.3 – 0.4 gal/100 sq ft)
  • • Colours Transparent
    • Solid content 30 %
    • Drying time (23°C and 50% r.h.) 10'
    • Application Temperature
    from +5 to +40(°C)
    • Temperature Resistance (after curing)
    -40/+90(°C)

    Packaging
    500/1000 ml alu bottle;
     
  • simpseal55
    One-part hybrid polymer elastic adhesive and sealant. Free of solvent and isocyanates.

    SiMP®-Seal 55 is a one-part Silyl-Terminated Polymer (SiMP®) elastic adhesive and sealant suitable for all applications in concrete and metal construction, bonding to a wide range of materials including concrete, brick, stone, marble, metals (also coated or treated), aluminium, brass, copper, glass, mirrors, FRP/GRP and many rigid plastics. Suitable in the building industry for sealing of joints in sheet metal fabrication and duct-work where a tough flexible rubber joint or a good elastic adhesive is required.

    • Odorless
    • No bubble formation
    • Primerless adhesion on almost all substrates
    • Excellent weathering resistance, color stability and UV resistance
    • Easy tooling with excellent surface appearance
    • Neutral behavior, does not attack substrate
    • Paintable
  • • Colours White, Grey, Black
    • Cure rate (1 day at 23°C and 50% r.h.) 3 -3,5 mm/24h
    • Shore A (23°C and 50% r.h.) 55
    • Tack-Free Time (23°C and 50% r.h.)
    30'
    • Elastic mudulus at 100% (ISO 37 DIN 53504) ≥ 1,7 N/mm2
    • Tensile strength (ISO 37 DIN 53504)
    ≥ 2,8 N/mm2
    • Elongation (ISO 37 DIN 53504) ≥ 280 %
    • Application Temperature from +5 to +40 (°C)
    • Temperature Resistance (after curing) -40 / +100 (°C)

    Packaging
    290 ml cartridge; 400/600 ml sausage; 200 lt drum;
     
  •  

    simpseal55 01 simpseal55 02

    Certificates and compliances:
    EN 1186, EN 13130, CEN/TS 14234
    (plastic materials in contact with foodstuff)
  • simpseal55
    One-part hybrid polymer elastic adhesive and sealant. Free of solvent and isocyanates.

    SiMP®-Seal 55 transparent is a one-part, high modulus, Silyl-Terminated Polymer elastic adhesive and sealant. Being transparent, it is suitable for all visible applications and bonding of transparent elements like glass, polycarbonate and polymethylmethacrylate. Suitable also for sealing and bonding in aquariums (SiMP®-Seal 55 cures even under water), shop showcases for foodstuff and swimming pools.

    • Transparent
    • No bubble formation
    • Primerless adhesion on almost every substrate
    • Good weathering resistance, color stability and UV resistance
    • It cures even under water
    • Perfect adhesion on PVC
  • • Colours Transparent
    • Cure rate (1 day at 23°C and 50% r.h.) 2 mm/24h
    • Shore A (23°C and 50% r.h.) 40-44
    • Tack-Free Time (23°C and 50% r.h.)
    20' - 30'
    • Elastic mudulus at 100% (ISO 37 DIN 53504) ≥ 0,6 N/mm2
    • Tensile strength (ISO 37 DIN 53504)
    ≥ 2 N/mm2
    • Elongation (ISO 37 DIN 53504) ≥ 400 %
    • Application Temperature from +5 to +40 (°C)
    • Temperature Resistance (after curing) -40 / +100 (°C)

    Packaging
    290 ml cartridge; 400/600 ml sausage; 200 lt drum;
     
  •  

    simpseal55trasp 01 simpseal55trasp 02

    Certificates and compliances:
    EN 1186, EN 13130, CEN/TS 14234
    (plastic materials in contact with foodstuff)
  • simpseal57ht
    One-part Hybrid polymer assembly adhesive for elastic structural bonding.
    Free of solvent and isocyanates.


    SiMP®-Seal 57 HT is a one-part, high modulus, Silyl Terminated Polymer (SiMP®) elastic adhesive, with high viscosity and high initial tack (high grab and green strength). It is suitable for the assembly of different materials such as panels, ceramics, stone and marble slabs, and facades. As a powerful and versatile elastic structural adhesive , it bonds to a wide range of materials including wood, concrete, treated/untreated/coated metals (aluminum, steel, copper, brass), glass, mirrors, FRP/GRP, and many rigid plastics where a powerful, vibration- and shock -resistant adhesive is required.

    • Odorless
    • No bubble formation
    • Primerless adhesion on almost all substrates
    • Good weathering resistance, color stability and UV resistance
    • Vibration and shock/impact resistant
  • • Colours White, Grey, Black
    • Curing rate (1 day at 23°C and 50% r.h.) ≥ 3 mm/24h
    • Shore A (23°C and 50% r.h.) 55
    • Tack-Free Time (23°C and 50% r.h.)
    25'
    • Elastic mudulus at 100% (ISO 37 DIN 53504) ≥ 2,2 N/mm2
    • Tensile strength (ISO 37 DIN 53504)
    ≥ 3 N/mm2
    • Elongation (ISO 37 DIN 53504) ≥ 240 %
    • Application Temperature from +5 to +40 (°C)
    • Temperature Resistance (after curing) -40 / +100 (°C)

    Packaging
    290 ml cartridge; 400/600 ml sausage; 200 lt drum;
     
  •  

    simpseal57ht 01 simpseal57ht 02


  • simp-high-tack
    One-part Hybrid polymer tack adhesive for elastic structural bonding.
    Free of solvent and isocyanates.


    SiMP® High Tack is a one-part, high modulus, Silyl-Terminated Polymer (SiMP®) elastic adhesive, with high viscosity and instant initial tack (high grab and green strength). It is suitable for the bonding and assembly of any nature of accessory or part on supports like concrete, brick, ceramics, stone, metal and any kind of panels. Perfecto to bond mirrors and hardware in bathrooms, garages, officies avoiding the use of screws, nails and any other kind of support.

    • Odorless
    • No bubble formation
    • Primerless adhesion on almost all substrates
    • Good weathering resistance, color stability and UV resistance
    • Vibration and shock/impact resistant
  • • Colours White
    • Curing rate (1 day at 23°C and 50% r.h.) 2,3 mm/24h
    • Shore A (23°C and 50% r.h.) 62 -67
    • Tack-Free Time (23°C and 50% r.h.)
    10'
    • Elastic mudulus at 100% (ISO 37 DIN 53504) ≥ 3,1 N/mm2
    • Tensile strength (ISO 37 DIN 53504) ≥ 3,2 N/mm2
    • Elongation (ISO 37 DIN 53504) ≥ 100 %
    • Application Temperature from +5 to +40 (°C)
    • Temperature Resistance (after curing) -40 / +100 (°C)

    Packaging
    290 ml cartridge; 400/600 ml sausage; 200 lt drum;
     
  •  

    simp-high-tack 01 simp-high-tack 02


This site uses cookies to improve the performance of the same . You are free to give your consent to the use of cookies , but , in case of denial , some site functions may not work or have the same performance . For more information on cookies take vision of our privacy policy . To give consent to the use of cookies on this site click the "I accept". Read

AcceptClose