waterproofing

WATER PROOFING MEMBRANE

  • simpcoat
    Self-levelling, low viscosity liquid applied waterproofing membrane for spray and manual application.
    Formulated to combine the best of both silicone and polyurethane properties, including very good UV resistance, broad range of adhesion and exterior durability.

    SiMP® Coat 25 is a premium, liquid and cold applied, one-part, Silyl-Terminated Polymer waterproofing and UV resistant membrane. It cures by reaction with ambient moisture to form astrong protective and self-leveling coating. SiMP® Coat 25 provides water vapor permeability, allowing the surface to breathe. Ideal for application by airless pump for fast end cost-efficient application in large areas like new or existing concrete floor slabs and roofs, large horizontal surfaces, waterproofing of wet areas, protection of masonry and vertical surfaces. Also suitable for manual application by brush, roller or spatula.

    • Aliphatic hybrid polimer – Good UV resistance
    • Single component
    • Environmental friendly – Free of bitumen, isocyanates and solvents
    • One component self leveling grade, ready to use.
    • Bonds and cures in wet weather and on damp substrates , where water based products cannot.
  • • Colours Light grey
    • Curing rate (1 day at 23°C and 50% r.h.)  
    • Shore A (23°C and 50% r.h.) 25 - 30
    • Tack-Free Time (23°C and 50% r.h.)
    40' - 70'
    • Elastic mudulus at 100% (ISO 37 DIN 53504) ≥ 0,8 N/mm2
    • Tensile strength (ISO 37 DIN 53504) ≥ 1,1 N/mm2
    • Elongation (ISO 37 DIN 53504) ≥ 200 %
    • Application Temperature from +5 to +40 (°C)
    • Temperature Resistance (after curing) -40 / +100 (°C)

    Packaging
    7 Kg Alu bag; 200 lt drum;
     
  •  

    simpcoat25 01 simpcoat25 02


  • simpcoat
    Self-levelling, medium viscosity liquid applied waterproofing membrane for manual application.
    Formulated to combine the best of both silicone and polyurethane properties, including very good UV resistance, broad range of adhesion and exterior durability.


    SiMP® Coat 45 is a premium, liquid and cold applied, one-part, Silyl-Terminated Polymer waterproofing and UV resistant membrane. It cures by reaction with ambient moisture to form a strong protective and self-leveling coating. SiMP® Coat 45 provides water vapor permeability, allowing the surface to breathe. Ideal for application by brush or spatula in small-mediums areas, for mainteinance, repair, restoration and waterproofing in existing construction of concrete floors or any other roofing surface as well as wall-floor edges, connection, vertical applications, foundations, tanks. Suitable for application by roller for waterproofing of medium-large wet areas in both new and existing construction.

    • Aliphatic hybrid polimer – Good UV resistance
    • Single component
    • Environmental friendly – Free of bitumen, isocyanates and solvents
    • One component self leveling grade, ready to use.
    • Bonds and cures in wet weather and on damp substrates , where water based products cannot.
  • • Colours Light grey
    • Curing rate (1 day at 23°C and 50% r.h.) 2,5 mm/24h
    • Shore A (23°C and 50% r.h.) 50
    • Tack-Free Time (23°C and 50% r.h.)
    25' - 30'
    • Elastic mudulus at 100% (ISO 37 DIN 53504) ≥ 2,0 N/mm2
    • Tensile strength (ISO 37 DIN 53504) ≥ 3,2 N/mm2
    • Elongation (ISO 37 DIN 53504) ≥ 250 %
    • Application Temperature from +5 to +40 (°C)
    • Temperature Resistance (after curing) -40 / +90 (°C)

    Packaging
    7 Kg Alu bag; 200 lt drum;
     
  •  

    simpcoat45 01 simpcoat45 02


 

This site uses cookies to improve the performance of the same . You are free to give your consent to the use of cookies , but , in case of denial , some site functions may not work or have the same performance . For more information on cookies take vision of our privacy policy . To give consent to the use of cookies on this site click the "I accept". Read

AcceptClose