sealants2

SEALANTS AND ELASTIC ADHESIVES

  • useal500
    Polyurethane multipurpose sealant and elastic adhesive.

    U-Seal 500 is a high performance, dual purpose adhesive and sealing compound with permanent elasticity. It bonds well to a wide variety of substrates and enables permanent elastic sealing with high adhesive strength between most common metals, painted surfaces, GRP, PVC and other rigid plastics.

    • One-component polyurethane
    • Permanently flexible and stable
    • Bonds and seals at the same time
    • Over-paintable
  • • Colours White, Grey, Black
    • Curing rate (1 day at 23°C and 50% r.h.) 3 mm/24h
    • Shore A (23°C and 50% r.h.) 40
    • Tack-Free Time (23°C and 50% r.h.)
    50'
    • Elastic modulus at 100% (ISO 37 DIN 53504) ≥ 0,8 N/mm2
    • Tensile strength (ISO 37 DIN 53504)
    ≥ 1,8 N/mm2
    • Elongation (ISO 37 DIN 53504) ≥ 450%
    • Application Temperature from +5 to +40 (°C)
    • Temperature Resistance (after curing) -40 / +90 (°C)

    Packaging
    310 ml cartridge; 400/600 ml sausage; 200 lt drum;
     
  •  

    useal500 001            useal500 002

  • useal501
    Fast curing Polyurethane elastic adhesive and sealant for vehicle body construction and repair.

    U-SEAL 501 is a one-part, very fast curing, polyurethane elastic adhesive and sealant designed for car body construction and repair. Specifically developed to meet the car industry requirements, it is characterised by an initial controlled viscosity that makes the product easy to brush and to smooth, particularly in those applications where a thin layer or bead of adhesive is required. Once cured, the products reach high levels of hardness that gives an original equipment appearance to the material.

    • One-component polyurethane
    • Very fast skinning and curing time
    • Easy to brush and/or smooth
    • Permanently flexible and stable
    • Bonds and seals at the same time
    • Over-paintable in a short time
  • • Colours White, Grey, Black
    • Curing rate (1 day at 23°C and 50% r.h.) 4 mm/24h
    • Shore A (23°C and 50% r.h.) 52
    • Tack-Free Time (23°C and 50% r.h.)
    25'
    • Tensile strength (ISO 37 DIN 53504)
    ≥ 2,0 N/mm2
    • Elongation (ISO 37 DIN 53504) ≥ 250%
    • Application Temperature from +5 to +40 (°C)
    • Temperature Resistance (after curing) -40 / +90 (°C)

    Packaging
    310 ml cartridge; 400/600 ml sausage; 200 lt drum;
     
  •  

    useal501 001            useal501 002

  • brushableseamsealer
    One-part rubber based seam sealer

    Brushable Seam Sealer is a one-part, thixotropic, rubber based sealant in solvent dispersion for brush applications. Once extruded, it cures fast to form an elastic sealing compound, providing an excellent barrier against dust, water and humidity. It is ideal for joint filling in the car body such as on flanges and welded parts in the front and rear of the vehicle. Easy to apply by soft or hard brush or by spatula. It can be over-painted.
    • One-component.
    • Fast curing
    • Easy to work, smooth and brush.
    • Over-paintable
  • • Colours Grey
    • Solid content 72%
    • Application Temperature from +5 to +40 (°C)
    • Temperature Resistance (after curing) -40 / +90 (°C)

    Packaging
    1Kg tin;
     
  •  

    brushableseamsealer 001            brushableseamsealer 002

  • spraysimp
    One-part hybrid polymer sprayable adhesive and sealant.

    SPRAY-SiMP® is a low viscosity, Silyl-terminated polymer sealant specific for applications by spray or by paintbrush, to seal seams and welded joints in the automotive industry and in the construction and repair of coaches, car-bodies, railway carriages, industrial vehicles and containers. It has excellent primerless adhesion to metals, painted surfaces, aluminium, PVC, fiberglass reinforced plastic, ABS, polycarbonate and plastic materials in general.

    • Free of isocyanates and solvents. Odourless.
    • Application by spray or by paintbrush
    • No bubble formation
    • Protects against corrosion; does not attack support surfaces
    • Excellent weathering and UV resistance
    • Over-paintable wet on wet (preliminary tests recommended)
  • • Colours Grey, Beige
    • Curing rate (1 day at 23°C and 50% r.h.) 2,5 mm/24h
    • Shore A (23°C and 50% r.h.) 50/55
    • Tack-Free Time (23°C and 50% r.h.)
    30'
    • Elastic modulus at 100% (ISO 37 DIN 53504) ≥ 3,0 N/mm2
    • Tensile strength (ISO 37 DIN 53504)
    ≥ 3,5 N/mm2
    • Elongation (ISO 37 DIN 53504) ≥ 100%
    • Application Temperature from +5 to +40 (°C)
    • Temperature Resistance (after curing)

    -40 / +80 (°C)
    for briefs points at +120(°C)


    Packaging
    290 ml cartridge;
     
  •  

    spraysimp 001            spraysimp 002

  • simpseal30

    One-part hybrid polymermultipurpose elastic sealant.

    SiMP®-Seal 30 is a one-part Silyl-Terminated Polymer (SiMP®) multipurpose elastic sealant suitable for virtually all application in industry and general assembly. It bonds to a wide range of materials including metals, sheet steel (galvanised, plated and painted), untreated or anodised aluminium, brass, copper, glass, GRP and many rigid plastics as found in body work for vehicles, bus, truck, rail-coach, cabin, trailer, recreational vehicles and general fabrication assembly where a tough flexible rubber joint or a good elastic adhesive is required.
    • Isocyanates and solvents free. Odourless.
    • No bubble formation
    • Primer-less adhesion on almost every substrate
    • Excellent weathering resistance, colour stability and UV resistance
    • Easy tooling with excellent surface appearance
    • Over-paintable
  • • Colours White, Grey, Black
    • Curing rate (1 day at 23°C and 50% r.h.) 3 mm/24h
    • Shore A (23°C and 50% r.h.) 35 - 40
    • Tack-Free Time (23°C and 50% r.h.)
    35' - 40'
    • Elastic mudulus at 100% (ISO 37 DIN 53504) ≥ 1,2 N/mm2
    • Tensile strength (ISO 37 DIN 53504)
    ≥ 2,8 N/mm2
    • Elongation (ISO 37 DIN 53504) ≥ 450 %
    • Application Temperature from +5 to +40 (°C)
    • Temperature Resistance (after curing) -40 / +100 (°C)

    Packaging
    290 ml cartridge; 400/600 ml sausage; 200 lt drum;
     
  •  

    simpseal30 001 simpseal30 002



  • simpseal55

    One-part hybrid polymer elastic adhesive and sealant.

    SiMP®-Seal 55 is a one-part Silyl-Terminated Polymer (SiMP®) multipurpose elastic sealant suitable for virtually all application in industry and general assembly. It bonds to a wide range of materials including metals, sheet steel (galvanised, plated and painted), untreated or anodised aluminium, brass, copper, glass, GRP and many rigid plastics as found in body work for vehicles, bus, truck, rail-coach, cabin, trailer, recreational vehicles and general fabrication assembly where a tough flexible rubber joint or a good elastic adhesive is required.

     

    • Isocyanates and solvents free. Odourless.
    • No bubble formation
    • Primer-less adhesion on almost every substrate
    • Excellent weathering resistance, colour stability and UV resistance
    • Easy tooling with excellent surface appearance
    • Vibration and shock/impact resistant
    • Over-paintable
  • • Colours White, Grey, Black
    • Curing rate (1 day at 23°C and 50% r.h.) ≥ 3 mm/24h
    • Shore A (23°C and 50% r.h.) 50
    • Tack-Free Time (23°C and 50% r.h.)
    15'
    • Elastic mudulus at 100% (ISO 37 DIN 53504) ≥ 1,7 N/mm2
    • Tensile strength (ISO 37 DIN 53504)
    ≥ 2,8 N/mm2
    • Elongation (ISO 37 DIN 53504) ≥ 270 %
    • Application Temperature from +5 to +40 (°C)
    • Temperature Resistance (after curing) -40 / +100 (°C)

    Packaging
    290 ml cartridge; 400/600 ml sausage; 200 lt drum;
     
  •  

    simpseal55 001 simpseal55 002



  • simpseal57ht
    One-part Hybrid  polymer assembly adhesive for elastic structural bonding.

    SiMP®-Seal 57 HT is a one-part, high modulus, Silyl-Terminated Polymer (SiMP®) assembly elastic adhesive, with high viscosity and high initial tack and high green strength. It is suitable for the assembly of side, roof and frontal panels to structures of buses, trucks and special vehicles. As a powerful and versatile elastic structural adhesive, it bonds to a wide range of materials including metals, glass, GRP, and many rigid plastics where a powerful, vibration and shock resistance adhesion or a tough flexible rubber joint is required.

    • Isocyanates and solvents free. Odourless.
    • No bubble formation
    • Primer-less adhesion on almost every substrate
    • Good weathering resistance, colour stability and UV resistance
    • Vibration and shock/impact resistant
  • • Colours White, Grey, Black
    • Curing rate (1 day at 23°C and 50% r.h.) ≥ 2,5 mm/24h
    • Shore A (23°C and 50% r.h.) 60
    • Tack-Free Time (23°C and 50% r.h.)
    15'
    • Elastic mudulus at 100% (ISO 37 DIN 53504) ≥ 3 N/mm2
    • Tensile strength (ISO 37 DIN 53504)
    ≥ 3,2 N/mm2
    • Elongation (ISO 37 DIN 53504) ≥ 120 %
    • Application Temperature from +5 to +40 (°C)
    • Temperature Resistance (after curing) -40 / +100 (°C)

    Packaging
    290 ml cartridge; 400/600 ml sausage; 200 lt drum;
     
  •  

    simpseal57ht 001 simpseal57ht 002

    Certificates and co mpliances:

    EN 1186, EN 13130, CEN/TS 14234

    (Plastic materials in contact with foodstuff)

This site uses cookies to improve the performance of the same . You are free to give your consent to the use of cookies , but , in case of denial , some site functions may not work or have the same performance . For more information on cookies take vision of our privacy policy . To give consent to the use of cookies on this site click the "I accept". Read

AcceptClose