Adhesives
Wood-flooring
Return to: Construction

U-Bond Special X-treme

One-part polyurethane hard-elastic wood-flooring adhesive

U-Bond Special Xtreme is a ready-to-use, one-component, hard-elastic wood-flooring polyurethane adhesive for the professional installation of all wood-flooring. Its hardness and high bonding strength ensure total plank bonding. Thanks to the special formulation and the strong product characteristics, U-Bond Special Xtreme remains a versatile adhesive which allows excellent laying results even in difficult conditions. The product is solvent- and water-free and has very low emission.   CONFORM TO: EN 14293 Adhesives for bonding parquet subfloor LEED iEQc 4.1 ; SCAQMD Rule 1168 ; BAAQMD Reg 8 Rule 51 CARB VOC levels regulation   AREAS OF APPLICATION: U-Bond Special Xtreme is suitable for full surface bonding of multilayer engineered pre-finished parquet or solid wood floors with or without tongue and groove as well as chipboards to cement screeds, fast setting screeds, anhydrite screeds, or on pre-existent wood, ceramic tile, and marble flooring. It is preferable the use of stable woods. It is also suitable in combination with under-floor heating systems. The adhesive is suitable for all species according to UNI EN 13556.
  • Ready-to-use, no mixing required
  • Very low emission
  • Hard-elastic adhesive, firmly bonds all wood types to screed
  • Easy to spread and trowel by spatula with excellent ridge holding consistency
  • Fast grab
  • Suitable for subfloor heating

You might be interested in



  • U-Primer 150
    One-component polyurethane primer.


  • Silcoflex 595
    One-part, neutral oxime-curing, silicone sealant for indoor and outdoor applications

    • Rapid crosslinking, short skin time
    • Primerless adhesion to most materials
    • Non-corrosive to metals
    • Suitable for alkaline substrates such as concrete, mortar, fibrous cement
    • Adheres excellently to glass and metals
    • Contains fungicides, suitable for use in sanitary areas
    • Odourless
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures

  • PM3 – Spray Gun
    Pneumatic gun for sprayable sealants


  • U-Bond 309 TFC
    One-part polyurethane fast curing translucent paste adhesive

    • One-component polyurethane
    • Translucent, for invisible bonding line
    • Very fast setting
    • Cold applied, gun grade
    • Easy-to-use, non-sagging
    • Very low foaming with high filling capacity
    • Excellent adhesion on numerous substrates like insulating material, wood, plastic and metal
    • Solvent free - Odourless
    • Weathering resistance according to DIN 204 D4
    • Resistant to ageing
    • Resistant to chemicals

  • U-SEAL 906 AS
    One-part, hydrophilic swelling polyurethane adhesive and sealant

    • Bonds and seals at the same time
    • May be applied on damp surfaces
    • Good thixotropy, non-sagging
    • One-component, east and fast application
    • Excellent primerless adhesion on concrete, plastic, metal and bentonitic stripes
    • Swells in contact with water
    • Expansion rate increasing over time up to 450%, without damage to uncured concrete
    • Resistant to pressures up to 5 bar
    • Returns to the original volume in absence of water
    • Solvent free

  • S-Bond Force
    One part solvent and isocyanate-free hard-elastic adhesive.

    • One-part adhesive, solvent and isocyanate -free
    • One-part adhesive, solvent and isocyanate -free
    • Ready-to-use, no mixing required
    • Hard-elastic adhesive ridge (EN 14 293) , firmly bonds all wood types to screed
    • Very high tensile strength
    • No staining of the prefinished surface in engineered wood plank

  • U-Bond 305
    One-part polyurethane paste adhesive

    • One-component polyurethane
    • Cold applied, gun grade
    • Easy-to-use, non-sagging
    • Very low foaming with high filling capacity
    • Excellent adhesion on numerous substrates like insulating material, wood, plastic and metal
    • Solvent free Odorless
    • Weathering resistance according to DIN 204 D4
    • Resistant to ageing
    • Resistant to chemicals
  • One-part liquid polyurethane adhesive for wood and panel bonding, U-BOND 301

    U-Bond 301
    One-part liquid polyurethane adhesive for wood and panel bonding

    • Easy-to-use. Pourable from twist-cap bottle to automatic dispensing industrial equipment
    • Controlled foaming grade with good filling capacity
    • Panel lamination and assembly
    • Outdoor applications for woodworking
    • Structural Bonding of construction materials

  • S-Bond Flex
    One part solvent and isocyanate-free elastic adhesive.

    • One-part adhesive, solvent- and isocyanate-free
    • Very low emission and odor-free (Emicode EC1 PLUS compliant)
    • Ready-to-use, no mixing required
    • No staining of the prefinished surface in engineered wood plank
  • Placeholder

    SiMP Ultra Tack
    Ultra-high grab and extreme green strength one-part, SiMP elastic assembly adhesive

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free, odourless
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Extreme green strength: Ultra high grab and load bearing capacity
    • High mechanical and dynamic stress resistance
    • Shock and impact resistance
    • Vibration and sound damping properties
    • Increases torsion stiffness in final assembly
    • Very good flow already from +5°C; maximum grab still at +35°C
    • No bubble formation
    • Excellent primerless adhesion on all typical industrial materials and substrates
    • Non-staining. Neutral behavior, does not attack support surface
    • No Hazard symbol required. Odorless
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
  • construction adhesive, wood-flooring adhesive, , two component epoxy-polyurethane adhesive, 2K-Bond Contract

    2K-Bond Contract
    Two part epoxy-polyurethane adhesive.

    • One-part adhesive, solvent -free
    • Ready-to-use, no mixing required
    • Hard-elastic adhesive ridge (EN 14 293)
    • Firmly bonds all wood types to screed

  • SiMP 2K Fast

    • Fast strength build-up, handling strength achieved after 60 minutes
    • Simple processing
    • Does not sag or run
    • Very wide primerless adhesion range
    • Suitable for general purpose bonding
    • Neutral behaviour, does not attack support surfaces
    • High mechanical and dynamic stress resistance
    • Impact and vibration resistant (shock absorbing)
    • Spot weldable before curing
    • May be sanded and overpainted
    • Solvent free, odourless

  • Eco Bond Flooring 4 in 1
    One-part SiMP high-elastic strength wood-flooring adhesive

    • SiMP Silyl-Modified Polymer
    • Ready-to-use, no mixing required
    • Solvent and isocyanate free, odorless
    • Acting as a vapor barrier by providing very low vapor permeability
    • Supplying sound insulation due to a reduced impact sound pressure level
    • Having an anti-shock system that guarantees strength and adhesion under real working conditions
    • Having very low VOC emissions certified by EMICODE EC1 PLUS
    • No Hazard symbol required

  • U-Seal 500
    One-part polyurethane multipurpose adhesive sealant

    • Bonds and seals at the same time
    • Permanently elastic; accommodates joint movement of ±25%
    • Easy to gun with excellent tooling consistency
    • Good thixotropy, non-sagging
    • Shock and impact resistance
    • Vibration and sound dampening properties
    • Excellent primerless adhesion on all typical construction and industrial materials
    • Elastic bonding between metal, plastic, glass and other materials
    • Non-staining. Neutral behavior, does not attack support surface
    • Good resistance to ageing, weathering and cleansing agents, sea water, lime water
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)

  • SiMP Fix Crystal
    One-part SiMP crystal clear elastic adhesive and sealant

    • Crystal clear
    • Excellent resistance to ageing, weathering; color stable, non-yellowing and non-chalking
    • Environmentally friendly – Free of isocyanates and solvents
    • No hazard symbol required
    • No bubble formation - Odorless
    • Bonds and seals at the same time
    • Permanently elastic
    • Easy to gun with excellent tooling consistency
    • Exceptional thixotropy, non-sagging, short cut off string
    • No change in volume, no shrinkage
    • Good primerless adhesion on all typical construction and industrial materials
    • Non-staining on concrete and porous materials

  • CSG 210 Gun
    Pneumatic gun for cartridges

  • One-part polyurethane fast curing paste adhesive

    U-Bond 307 FC
    One-part polyurethane fast curing paste adhesive

    • One-component polyurethane
    • Very fast setting
    • Cold applied, gun grade
    • Easy-to-use, non-sagging
    • Very low foaming with high filling capacity
    • Excellent adhesion on numerous substrates like insulating material, wood, plastic and metal
    • Solvent free – Odorless
    • Weathering resistance according to DIN 204 D4
    • Resistant to ageing
    • Resistant to chemicals
  • Placeholder

    S Bond W4


  • SiMP-Seal 650
    Multipurpose one-part SiMP elastic adhesive and sealant. Completely odorless and very low emissions

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free. No Hazard symbol required
    • Emicode EC1 certified with very low emission, thanks to its specific formulation
    • Completely odorless
    • Excellent resistance to ageing and weathering
    • Completely color stable
    • White color as pure and non-yellowish
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Neutral behavior, does not attack support surface
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
    • Short time resistant up to +180 °C for powder and thermal coating