Aftermarket
Auto Glass Replacement
Return to: Industry

U-Seal 201 Fast

Fast polyurethane adhesive for windscreen replacement

Purposely formulated to bond windscreens, rear and lateral vehicle glass. Ideal for bonding elements in fiberglass in commercial and industrial vehicles (roofs, front, rear and side panels).   2 HR Drive-Away Time certified according to TUV FMVSS 208/212 with double airbag NON CONDUCTIVE – Suitable for use on glass with integrated antenna No sag – Excellent stability and workability No string Not affected by low temperatures Prevents corrosion on contact with vehicles with aluminium bodies    
  • 600ml Minimum order quantity of  300 pcs
  • Rapid application and curing
  • One-component solvent free polyurethane.
  • Non-sag, with minimal stringing
  • Low-conductivity. Suitable for use with integrated antenna
  • Prevents corrosion in aluminium-body vehicles
Color
Black
Curing rate
(1 day at 23°C and 50% r.h.)
4 mm
Shore A
(23°C and 50% r.h.)
55
Tack-Free Time
(23°C and 50% r.h.)
15'
Tensile strength
(ISO 37 DIN 53504)
≥ 9 N/mm²
Elongation
(ISO 37 DIN 53504)
≥ 300 %
Application temperature
from +5 to +40 (°C)
Temperature Resistance
(after curing)
-40 / +100 (°C)

Packaging:
310 ml cart.; 400/600 ml saus.

There aren't other information

You might be interested in



  • Expo Misto Block
    Display kit

    • EACH MIXED BLOCK EXPO CONTAINS:
    • 4 Frena filetti forte - 20ml
    • 1 Frena filetti forte - 60ml
    • 4 Frena filetti medio - 20ml
    • 1 Frena filetti medio - 60ml
    • 4 Fissa cuscinetti - 20ml
    • 1 Fissa cuscinetti - 60ml
    • 3 Liquidi - 60ml
    • 3 Idraulica-Gas metano - 60ml

  • U-Seal 209 Primerless
    Primerless, fast curing polyurethane direct glazing adhesive sealant

    • Primerless adhesion
    • Rapid application and curing
    • One-component polyurethane, solvent free.
    • Non-sag, with minimal stringing

  • U-Seal 550FC
    Fast-curing one-part polyurethane multipurpose adhesive sealant PVC- and smell- free

    • Non-sag, exceptional thixotropy and short cut-off string
    • Easy to gun with excellent tooling consistency
    • Very fast curing through volume
    • Over-paintable in a short time with many water and solvent based paints (preliminary tests recommended)
    • Bonds and seals at the same time
    • Permanently elastic over a wide range of temperatures
    • Non-sticky / does not pick up dirt
    • Performant adhesion on metal and plastic materials.
    • Non-staining
    • Allows equalised stress transfer due to permanent elasticity.
    • Good resistance to ageing and weathering
  • Placeholder

    Simp 2K Fast

    • Privo di solventi ed isocianati
    • Tempo aperto 4 min a 23°C - 50%UR
    • Tempo di presa 30 min
    • Perfettamente flessibile
    • Sovraverniciabile con vernici a base solvente e a base acqua
  • Placeholder

    Simp Crystal


  • Felt Applicator


  • U-Bond Ultra 2K
    Adesivo poliuretanico bicomponente strutturale - 1-5 minuti

    • Rapido indurimento
    • Carteggiabile e sovra verniciabile
    • Colore nero

  • U-Primer 130
    Moisture-curing black primer for glass - Felt applicator - Nitrile Gloves


  • U-Bond Ultra 2K FLX Trasparente
    Adesivo poliuretanico bicomponente strutturale - 1-5 minuti

    • Flessibile
    • Trasparente
    • Inodore e senza solventi
    • Presa estremamente rapida
    • Carteggiabile e sovra verniciabile
    • Saldabile a punti prima della polimerizzazione

  • Silimotor
    Self-levelling red silicone gasket

    • Operating temperatures from -60 °C to 260 °C (peaks up to 300 °C)
    • Ideal for engine heads

  • U-Bond Ultra 2K
    Adesivo poliuretanico bicomponente strutturale - 30 minuti

    • Inodore e senza solventi
    • Presa estremamente rapida
    • Carteggiabile e sovra verniciabile
    • Saldabile a punti prima della polimerizzazione

  • SiMP-Seal 60 HV
    Primerless, high green strength and fast curing hybrid polymer direct glazing adhesive sealant

    • Primerless adhesion
    • Rapid application and curing
    • One-component isocyanate solvent free Silyl-terminated polymer (SiMP)
    • Non sag, with short cut-off string. High green strength
    • Low-conductivity. Suitable for use with integrated antenna
    • Prevents corrosion in aluminium-body vehicles

  • L&L A-K015 – L&L A-K083
    Adesivo bicomponente prima (rapporto miscelazione 1:1)

  • Placeholder

    U Primer 199 DC

  • Placeholder

    Silcoflex 595


  • X-Bond
    Bicomponent adhesive for extreme bonding

    • Translucent color
    • For all difficult plastics
    • Operating temperature from -40°C to + 80°C
    • Quick 5 to 8 minutes

  • U-Seal 207 Plus
    Polyurethane direct glazing adhesive sealant

    • One-component solvent free polyurethane
    • Non-sag, with minimal stringing
    • Low-conductivity. Suitable for use with integrated antenna
    • Prevents corrosion in aluminium-body vehicles
  • Placeholder

    S Bond W4


  • U-Seal 205 HM-LC
    Ultra-fast, High Modulus & Low Conductivity polyurethane direct glazing adhesive sealant

    • Rapid application and curing
    • One-component solvent free polyurethane
    • Capable of withstanding high dynamic stresses
    • Non-sag, with minimal stringing
    • Low-conductivity. Suitable for use with integrated antenna