Aftermarket
Auto Glass Replacement
Return to: Industry

U-Seal 209 Primerless

Primerless, fast curing polyurethane direct glazing adhesive sealant

U-Seal 209 Primerless is an excellent non-sag, one-component, flexible polyurethane adhesive for automotive direct glazing. Can be applied primerless to windshield and painted metal without pretreatments such as black primer and/or activator.   DRIVE AWAY TIME: 2 hours on vehicles fitted with both driver & passenger airbags.
  • Primerless adhesion
  • Rapid application and curing
  • One-component polyurethane, solvent free.
  • Non-sag, with minimal stringing
Color
Black
Curing rate
(1 day at 23°C and 50% r.h.)
3 mm
Shore A
(23°C and 50% r.h.)
55
Tack-Free Time
(23°C and 50% r.h.)
35'
Tensile strength
(ISO 37 DIN 53504)
≥ 9 N/mm²
Elongation
(ISO 37 DIN 53504)
≥ 250 %
Application Temperature
from +5 to +40 (°C)
Temperature Resistance
(after curing)
-40 / +100 (°C)

Packaging:
310 ml cart.; 400/600 ml saus.

There aren't other information

There aren't downloads

You might be interested in


  • Placeholder

    Simp Crystal


  • U-Bond Ultra 2K FLX Trasparente
    Adesivo poliuretanico bicomponente strutturale - 1-5 minuti

    • Flessibile
    • Trasparente
    • Inodore e senza solventi
    • Presa estremamente rapida
    • Carteggiabile e sovra verniciabile
    • Saldabile a punti prima della polimerizzazione
  • Placeholder

    U Primer 199 DC


  • U-Bond Ultra 2K
    Adesivo poliuretanico bicomponente strutturale - 1-5 minuti

    • Rapido indurimento
    • Carteggiabile e sovra verniciabile
    • Colore nero

  • Silimotor
    Self-levelling red silicone gasket

    • Operating temperatures from -60 °C to 260 °C (peaks up to 300 °C)
    • Ideal for engine heads

  • L&L A-K015 – L&L A-K083
    Adesivo bicomponente prima (rapporto miscelazione 1:1)


  • Expo Misto Block
    Display kit

    • EACH MIXED BLOCK EXPO CONTAINS:
    • 4 Frena filetti forte - 20ml
    • 1 Frena filetti forte - 60ml
    • 4 Frena filetti medio - 20ml
    • 1 Frena filetti medio - 60ml
    • 4 Fissa cuscinetti - 20ml
    • 1 Fissa cuscinetti - 60ml
    • 3 Liquidi - 60ml
    • 3 Idraulica-Gas metano - 60ml
  • Placeholder

    S Bond W4


  • X-Bond
    Bicomponent adhesive for extreme bonding

    • Translucent color
    • For all difficult plastics
    • Operating temperature from -40°C to + 80°C
    • Quick 5 to 8 minutes

  • U-Seal 205 HM-LC
    Ultra-fast, High Modulus & Low Conductivity polyurethane direct glazing adhesive sealant

    • Rapid application and curing
    • One-component solvent free polyurethane
    • Capable of withstanding high dynamic stresses
    • Non-sag, with minimal stringing
    • Low-conductivity. Suitable for use with integrated antenna

  • Felt Applicator


  • U-Seal 550FC
    Fast-curing one-part polyurethane multipurpose adhesive sealant PVC- and smell- free

    • Non-sag, exceptional thixotropy and short cut-off string
    • Easy to gun with excellent tooling consistency
    • Very fast curing through volume
    • Over-paintable in a short time with many water and solvent based paints (preliminary tests recommended)
    • Bonds and seals at the same time
    • Permanently elastic over a wide range of temperatures
    • Non-sticky / does not pick up dirt
    • Performant adhesion on metal and plastic materials.
    • Non-staining
    • Allows equalised stress transfer due to permanent elasticity.
    • Good resistance to ageing and weathering

  • U-Bond Ultra 2K
    Adesivo poliuretanico bicomponente strutturale - 30 minuti

    • Inodore e senza solventi
    • Presa estremamente rapida
    • Carteggiabile e sovra verniciabile
    • Saldabile a punti prima della polimerizzazione

  • U-Primer 130
    Moisture-curing black primer for glass - Felt applicator - Nitrile Gloves


  • SiMP-Seal 60 HV
    Primerless, high green strength and fast curing hybrid polymer direct glazing adhesive sealant

    • Primerless adhesion
    • Rapid application and curing
    • One-component isocyanate solvent free Silyl-terminated polymer (SiMP)
    • Non sag, with short cut-off string. High green strength
    • Low-conductivity. Suitable for use with integrated antenna
    • Prevents corrosion in aluminium-body vehicles

  • U-Seal 201 Fast
    Fast polyurethane adhesive for windscreen replacement

    • Rapid application and curing
    • One-component solvent free polyurethane.
    • Non-sag, with minimal stringing
    • Low-conductivity. Suitable for use with integrated antenna
    • Prevents corrosion in aluminium-body vehicles
  • Placeholder

    Silcoflex 595


  • U-Seal 207 Plus
    Polyurethane direct glazing adhesive sealant

    • One-component solvent free polyurethane
    • Non-sag, with minimal stringing
    • Low-conductivity. Suitable for use with integrated antenna
    • Prevents corrosion in aluminium-body vehicles
  • Placeholder

    Simp 2K Fast

    • Privo di solventi ed isocianati
    • Tempo aperto 4 min a 23°C - 50%UR
    • Tempo di presa 30 min
    • Perfettamente flessibile
    • Sovraverniciabile con vernici a base solvente e a base acqua