Aftermarket
General Industry
Marine
Transportation
Return to: Industry

U-Bond Ultra 2K FLX Trasparente

Adesivo poliuretanico bicomponente strutturale - 1-5 minuti

Particolarmente idoneo in ambito industriale per l’incollaggio strutturale tra parti in plastica e metallo o metallo con metallo.
  • Flessibile
  • Trasparente
  • Inodore e senza solventi
  • Presa estremamente rapida
  • Carteggiabile e sovra verniciabile
  • Saldabile a punti prima della polimerizzazione
CODICE
18064
13526
CONFEZIONE
cartuccia 400 ml 7’’
sacchetto mixer
COLORE
trasparente
U. DI VEND.
6
12

There aren't other information

There aren't downloads

You might be interested in


  • Placeholder

    Silcoflex 595


  • X-Bond
    Bicomponent adhesive for extreme bonding

    • Translucent color
    • For all difficult plastics
    • Operating temperature from -40°C to + 80°C
    • Quick 5 to 8 minutes

  • L&L A-K015 – L&L A-K083
    Adesivo bicomponente prima (rapporto miscelazione 1:1)


  • Butaflex 200
    Elastoplastic butyl sealant

    • Excellent adhesion to metals and plastics
    • Resistance to atmospheric agents
    • Always plastic, does not drip

  • U-Seal 500
    One-part, thixotropic polyurethane elastic adhesive sealant

    • One-component polyurethane
    • Permanently flexible and stable
    • Bonds and seals at the same time
    • Over-paintable

  • Expo Misto Block
    Display kit

    • EACH MIXED BLOCK EXPO CONTAINS:
    • 4 Frena filetti forte - 20ml
    • 1 Frena filetti forte - 60ml
    • 4 Frena filetti medio - 20ml
    • 1 Frena filetti medio - 60ml
    • 4 Fissa cuscinetti - 20ml
    • 1 Fissa cuscinetti - 60ml
    • 3 Liquidi - 60ml
    • 3 Idraulica-Gas metano - 60ml

  • U-Bond Ultra 2K
    Adesivo poliuretanico bicomponente strutturale - 30 minuti

    • Inodore e senza solventi
    • Presa estremamente rapida
    • Carteggiabile e sovra verniciabile
    • Saldabile a punti prima della polimerizzazione

  • Silicolor
    Pure acetic coloured silicone

    • Resistance in particularly humid environments
    • Also for outdoor use
    • Excellent adhesive properties
    • “Pure” silicone; minimum shrinkage
    • Cartridge with 360° swivel spout

  • Silimotor
    Self-levelling red silicone gasket

    • Operating temperatures from -60 °C to 260 °C (peaks up to 300 °C)
    • Ideal for engine heads

  • S-Bond Flex
    One part solvent and isocyanate-free elastic adhesive.

    • One-part adhesive, solvent- and isocyanate-free
    • Very low emission and odor-free (Emicode EC1 PLUS compliant)
    • Ready-to-use, no mixing required
    • No staining of the prefinished surface in engineered wood plank
  • Placeholder

    U Primer 199 DC


  • U-Primer 130
    Moisture-curing black primer for glass - Felt applicator - Nitrile Gloves


  • Felt Applicator


  • U-Seal 550FC
    Fast-curing one-part polyurethane multipurpose adhesive sealant PVC- and smell- free

    • Non-sag, exceptional thixotropy and short cut-off string
    • Easy to gun with excellent tooling consistency
    • Very fast curing through volume
    • Over-paintable in a short time with many water and solvent based paints (preliminary tests recommended)
    • Bonds and seals at the same time
    • Permanently elastic over a wide range of temperatures
    • Non-sticky / does not pick up dirt
    • Performant adhesion on metal and plastic materials.
    • Non-staining
    • Allows equalised stress transfer due to permanent elasticity.
    • Good resistance to ageing and weathering
  • Placeholder

    S Bond W4


  • U-Bond Ultra 2K
    Adesivo poliuretanico bicomponente strutturale - 1-5 minuti

    • Rapido indurimento
    • Carteggiabile e sovra verniciabile
    • Colore nero

  • Simp-Seal Teak 680
    Adesivo elastico per calafataggio nautico a base di polimeri Simp-Silyl Modified Polymer

    • Esente da solvente, isocianato e PVC
    • Non crea bolle
    • Scarso ritiro
    • Facile levigatura, non impasta
    • Rapido
  • Placeholder

    Simp Crystal


  • U-Seal 208 BTR
    High Viscosity Polyurethane direct glazing adhesive sealant. Specific for bonding and sealing in BTR

    • One-component polyurethane, solvent free
    • Non-sag, with minimal stringing
    • High Viscosity and Green strength
    • High UV, weathering and ageing resistance
  • Placeholder

    Simp 2K Fast

    • Privo di solventi ed isocianati
    • Tempo aperto 4 min a 23°C - 50%UR
    • Tempo di presa 30 min
    • Perfettamente flessibile
    • Sovraverniciabile con vernici a base solvente e a base acqua

  • U-Seal 207 Plus
    Polyurethane direct glazing adhesive sealant

    • One-component solvent free polyurethane
    • Non-sag, with minimal stringing
    • Low-conductivity. Suitable for use with integrated antenna
    • Prevents corrosion in aluminium-body vehicles

  • Simp-Seal 630 Spray
    Adesivo elastico monocomponente spray a base di polimeri Simp-Silyl Modified Polymer

    • Spruzzabile
    • Ampio spettro adesivo senza primer
    • Sovraverniciabile anche umido su umido
    • Alta resa e bassi costi produttivi
    • Industrializzabile in cicli automatici

  • Silcoflex 581 Cristallino
    Extra-clear acetic silicone sealant

    • Irreplaceable for invisible bonding
    • Excellent U.V. resistance
    • Good universal adherence

  • S-Bond Deck
    Adesivo elastico a base di polimeri Simp-Silyl Modified Polymer

    • Permanentemente elastico
    • Ampio spettro applicativo in assenza di primer
    • Tenace
    • Rapido
    • Possibile formulazione bicomponente per applicazioni controllate