Aftermarket
Auto Glass Replacement
Marine
Marine Glass Replacement
Transportation
Transportation Glass Replacement
Return to: Industry

SiMP-Seal 60 HV

Primerless, high green strength and fast curing hybrid polymer direct glazing adhesive sealant

SiMP-Seal 60 HV is a fast curing, flexible and high performance one-component Silyl-terminated polymer (SiMP) adhesive sealant for the primerless direct glazing of vehicle glass. It is suitable for the bonding of windshields and side or rear windows of cars, buses, trucks, cabins and special vehicles. Ideal for the bonding of fibreglass reinforced plastic elements (roof, side and frontal panels) to structures.   DRIVE AWAY TIME: 1 hour on vehicles fitted with both driver & passenger airbags. CERTIFICATES AND COMPLIANCES: FMVSS 212 certified, Euro-NCAP frontal impact sled condition conform (European New Car Assessment Programme)  
  • Primerless adhesion
  • Rapid application and curing
  • One-component isocyanate solvent free Silyl-terminated polymer (SiMP)
  • Non sag, with short cut-off string. High green strength
  • Low-conductivity. Suitable for use with integrated antenna
  • Prevents corrosion in aluminium-body vehicles
Color
Black
Curing rate
(1 day at 23°C and 50% r.h.)
3 mm
Shore A
(23°C and 50% r.h.)
57
Tack-Free Time
(23°C and 50% r.h.)
15'
Tensile strength
(ISO 37 DIN 53504)
≥ 3,3 N/mm²
Elongation
(ISO 37 DIN 53504)
≥ 260 %
Application Temperature
from +5 to +40 (°C)
Temperature Resistance
(after curing)
-40 / +100 (°C)

Packaging
290 ml cart.; 400/600 ml saus.

There aren't other information

You might be interested in



  • U-Bond Ultra 2K
    Adesivo poliuretanico bicomponente strutturale - 30 minuti

    • Inodore e senza solventi
    • Presa estremamente rapida
    • Carteggiabile e sovra verniciabile
    • Saldabile a punti prima della polimerizzazione
  • Placeholder

    Simp Crystal


  • U-Bond Ultra 2K FLX Trasparente
    Adesivo poliuretanico bicomponente strutturale - 1-5 minuti

    • Flessibile
    • Trasparente
    • Inodore e senza solventi
    • Presa estremamente rapida
    • Carteggiabile e sovra verniciabile
    • Saldabile a punti prima della polimerizzazione

  • U-Seal 201 Fast
    Fast polyurethane adhesive for windscreen replacement

    • Rapid application and curing
    • One-component solvent free polyurethane.
    • Non-sag, with minimal stringing
    • Low-conductivity. Suitable for use with integrated antenna
    • Prevents corrosion in aluminium-body vehicles

  • S-Bond Deck
    Adesivo elastico a base di polimeri Simp-Silyl Modified Polymer

    • Permanentemente elastico
    • Ampio spettro applicativo in assenza di primer
    • Tenace
    • Rapido
    • Possibile formulazione bicomponente per applicazioni controllate

  • Butaflex 200
    Elastoplastic butyl sealant

    • Excellent adhesion to metals and plastics
    • Resistance to atmospheric agents
    • Always plastic, does not drip

  • U-Seal 500
    One-part, thixotropic polyurethane elastic adhesive sealant

    • One-component polyurethane
    • Permanently flexible and stable
    • Bonds and seals at the same time
    • Over-paintable
  • Placeholder

    S Bond W4

  • Placeholder

    U Primer 199 DC


  • U-Seal 208 BTR
    High Viscosity Polyurethane direct glazing adhesive sealant. Specific for bonding and sealing in BTR

    • One-component polyurethane, solvent free
    • Non-sag, with minimal stringing
    • High Viscosity and Green strength
    • High UV, weathering and ageing resistance

  • U-Seal 205 HM-LC
    Ultra-fast, High Modulus & Low Conductivity polyurethane direct glazing adhesive sealant

    • Rapid application and curing
    • One-component solvent free polyurethane
    • Capable of withstanding high dynamic stresses
    • Non-sag, with minimal stringing
    • Low-conductivity. Suitable for use with integrated antenna

  • U-Primer 130
    Moisture-curing black primer for glass - Felt applicator - Nitrile Gloves


  • Silimotor
    Self-levelling red silicone gasket

    • Operating temperatures from -60 °C to 260 °C (peaks up to 300 °C)
    • Ideal for engine heads

  • Expo Misto Block
    Display kit

    • EACH MIXED BLOCK EXPO CONTAINS:
    • 4 Frena filetti forte - 20ml
    • 1 Frena filetti forte - 60ml
    • 4 Frena filetti medio - 20ml
    • 1 Frena filetti medio - 60ml
    • 4 Fissa cuscinetti - 20ml
    • 1 Fissa cuscinetti - 60ml
    • 3 Liquidi - 60ml
    • 3 Idraulica-Gas metano - 60ml

  • X-Bond
    Bicomponent adhesive for extreme bonding

    • Translucent color
    • For all difficult plastics
    • Operating temperature from -40°C to + 80°C
    • Quick 5 to 8 minutes

  • U-Bond Ultra 2K
    Adesivo poliuretanico bicomponente strutturale - 1-5 minuti

    • Rapido indurimento
    • Carteggiabile e sovra verniciabile
    • Colore nero

  • S-Bond Flex
    One part solvent and isocyanate-free elastic adhesive.

    • One-part adhesive, solvent- and isocyanate-free
    • Very low emission and odor-free (Emicode EC1 PLUS compliant)
    • Ready-to-use, no mixing required
    • No staining of the prefinished surface in engineered wood plank
  • Placeholder

    Silcoflex 595


  • Simp-Seal Teak 680
    Adesivo elastico per calafataggio nautico a base di polimeri Simp-Silyl Modified Polymer

    • Esente da solvente, isocianato e PVC
    • Non crea bolle
    • Scarso ritiro
    • Facile levigatura, non impasta
    • Rapido

  • U-Seal 209 Primerless
    Primerless, fast curing polyurethane direct glazing adhesive sealant

    • Primerless adhesion
    • Rapid application and curing
    • One-component polyurethane, solvent free.
    • Non-sag, with minimal stringing

  • U-Seal 207 Plus
    Polyurethane direct glazing adhesive sealant

    • One-component solvent free polyurethane
    • Non-sag, with minimal stringing
    • Low-conductivity. Suitable for use with integrated antenna
    • Prevents corrosion in aluminium-body vehicles

  • Felt Applicator


  • L&L A-K015 – L&L A-K083
    Adesivo bicomponente prima (rapporto miscelazione 1:1)

  • Placeholder

    Simp 2K Fast

    • Privo di solventi ed isocianati
    • Tempo aperto 4 min a 23°C - 50%UR
    • Tempo di presa 30 min
    • Perfettamente flessibile
    • Sovraverniciabile con vernici a base solvente e a base acqua

  • U-Seal 550FC
    Fast-curing one-part polyurethane multipurpose adhesive sealant PVC- and smell- free

    • Non-sag, exceptional thixotropy and short cut-off string
    • Easy to gun with excellent tooling consistency
    • Very fast curing through volume
    • Over-paintable in a short time with many water and solvent based paints (preliminary tests recommended)
    • Bonds and seals at the same time
    • Permanently elastic over a wide range of temperatures
    • Non-sticky / does not pick up dirt
    • Performant adhesion on metal and plastic materials.
    • Non-staining
    • Allows equalised stress transfer due to permanent elasticity.
    • Good resistance to ageing and weathering