Transportation Assembly
Return to: Industry

SiMP-Seal 57 HT

One-part hybrid polymer assembly adhesive for elastic bonding

SiMP-Seal 57 HT is a one-part, high modulus, Silyl-Terminated Polymer (SiMP) assembly elastic adhesive, with high viscosity and high initial tack and high green strength. It is suitable for the assembly of side, roof and frontal panels to structures of buses, trucks and special vehicles. As a powerful and versatile elastic structural adhesive, it bonds to a wide range of materials including metals, glass, GRP, and many rigid plastics where a powerful, vibration and shock resistance adhesion or a tough flexible rubber joint is required.
  • Isocyanates and solvents free. Odourless
  • No bubble formation
  • Primer-less adhesion on almost every substrate
  • Good weathering resistance, colour stability and UV resistance
  • Vibration and shock/impact resistant
White, Grey, Black
Curing rate
(1 day at 23°C and 50% r.h.)
3 mm
Shore A
(23°C and 50% r.h.)
Tack-Free Time
(23° C and 50% r.h.)
Elastic modulus at 100%
(ISO 37 DIN 53504)
≥ 2,2 N/mm²
Tensile strength
(ISO 37 DIN 53504)
≥ 3,2 N/mm²
(ISO 37 DIN 53504)
≥ 280 %
Application Temperature
from +5 to +40 (°C)
Temperature Resistance
(after curing)
-40 / +100 (°C)

400/600 ml saus.

There aren't other information

You might be interested in

  • U-Bond Ultra 2K
    Adesivo poliuretanico bicomponente strutturale - 30 minuti

    • Inodore e senza solventi
    • Presa estremamente rapida
    • Carteggiabile e sovra verniciabile
    • Saldabile a punti prima della polimerizzazione

  • U-Seal 207 Plus
    Polyurethane direct glazing adhesive sealant

    • One-component solvent free polyurethane
    • Non-sag, with minimal stringing
    • Low-conductivity. Suitable for use with integrated antenna
    • Prevents corrosion in aluminium-body vehicles

  • U-Primer 130
    Moisture-curing black primer for glass - Felt applicator - Nitrile Gloves

  • Placeholder

    U Primer 199 DC

  • Placeholder

    Silcoflex 595

  • Butaflex 200
    Elastoplastic butyl sealant

    • Excellent adhesion to metals and plastics
    • Resistance to atmospheric agents
    • Always plastic, does not drip

  • Felt Applicator

  • U-Bond Ultra 2K FLX Trasparente
    Adesivo poliuretanico bicomponente strutturale - 1-5 minuti

    • Flessibile
    • Trasparente
    • Inodore e senza solventi
    • Presa estremamente rapida
    • Carteggiabile e sovra verniciabile
    • Saldabile a punti prima della polimerizzazione

  • U-Seal 500
    One-part, thixotropic polyurethane elastic adhesive sealant

    • One-component polyurethane
    • Permanently flexible and stable
    • Bonds and seals at the same time
    • Over-paintable

  • U-Seal 550FC
    Fast-curing one-part polyurethane multipurpose adhesive sealant PVC- and smell- free

    • Non-sag, exceptional thixotropy and short cut-off string
    • Easy to gun with excellent tooling consistency
    • Very fast curing through volume
    • Over-paintable in a short time with many water and solvent based paints (preliminary tests recommended)
    • Bonds and seals at the same time
    • Permanently elastic over a wide range of temperatures
    • Non-sticky / does not pick up dirt
    • Performant adhesion on metal and plastic materials.
    • Non-staining
    • Allows equalised stress transfer due to permanent elasticity.
    • Good resistance to ageing and weathering

  • U-Bond 301
    One-part liquid polyurethane adhesive for wood and panel bonding

    • Easy-to-use. Pourable from twist-cap bottle to automatic dispensing industrial equipment
    • Controlled foaming grade with good filling capacity
    • Panel lamination and assembly
    • Outdoor applications for woodworking
    • Structural Bonding of construction materials

  • U-Bond Ultra 2K
    Adesivo poliuretanico bicomponente strutturale - 1-5 minuti

    • Rapido indurimento
    • Carteggiabile e sovra verniciabile
    • Colore nero

  • SiMP-Spray
    One-part hybrid polymer sprayable adhesive and sealant

    • Free of isocyanates and solvents. Odourless
    • Application by spray or by paintbrush
    • No bubble formation
    • Protects against corrosion; does not attack support surfaces
    • Excellent weathering and UV resistance
    • Over-paintable wet on wet (preliminary tests recommended)

  • U-Seal 208 BTR
    High Viscosity Polyurethane direct glazing adhesive sealant. Specific for bonding and sealing in BTR

    • One-component polyurethane, solvent free
    • Non-sag, with minimal stringing
    • High Viscosity and Green strength
    • High UV, weathering and ageing resistance
  • Placeholder

    Simp 2K Fast

    • Privo di solventi ed isocianati
    • Tempo aperto 4 min a 23°C - 50%UR
    • Tempo di presa 30 min
    • Perfettamente flessibile
    • Sovraverniciabile con vernici a base solvente e a base acqua

  • S-Bond Flex
    One part solvent and isocyanate-free elastic adhesive.

    • One-part adhesive, solvent- and isocyanate-free
    • Very low emission and odor-free (Emicode EC1 PLUS compliant)
    • Ready-to-use, no mixing required
    • No staining of the prefinished surface in engineered wood plank

  • U-Bond 307 FC
    One-part polyurethane fast curing paste adhesive

    • Fast curing with quick build-up strength
    • Easy-to-use. Non-sag grade. Very low foaming with good filling capacity
    • Excellent adhesion on numerous substrates like insulating material, wood, plastic and metal
    • Fast setting beading and cord applications
    • High mechanical resistance in assembly
    • Chemical anchorage in building construction for bonding of stones, plasterboard, cement cover and insulation panels
  • Placeholder

    S Bond W4

  • Placeholder

    Simp Crystal