SiMP-Seal 45 UV

Silicolor

One-part, acetoxy-curing, silicone sealant available in 32 colors, mold -resistant.

• 100% Silicone, free from solvents
• Rapid crosslinking, short skin time
• Resistant to molds and bacteria
• Adheres excellently to glass and vitrified surfaces, plastics and most coatings
• Specific for sanitary areas
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) temperatures

U-Primer 130

Black, moisture curing, one-step glass primer

Silcoflex 595

One-part, neutral oxime-curing, silicone sealant for indoor and outdoor applications

• Rapid crosslinking, short skin time
• Primerless adhesion to most materials
• Non-corrosive to metals
• Suitable for alkaline substrates such as concrete, mortar, fibrous cement
• Adheres excellently to glass and metals
• Contains fungicides, suitable for use in sanitary areas
• Odourless
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) temperatures

Brushable Seam Sealant

Car body repair one-part brushable seam sealant

• Cold applied
• Over-paintable, with many water and solvent based paints (preliminary tests recommended)
• Can be easily tooled, brushed and smoothed
• Corrosion protective

G+S Cleaner

Professional foam cleaning agent

• Active formula aggressive on contaminants
• Foaming action allow to identify contaminant areas
• Spray-on/wipe-off foam
• Does not run
• Fast dying and residue-free action
• Efficient as cutout lubricant
• Efficient as smoothing agent for beading, leaving no traces
• Efficient as dry cleaner for external body parts and internal upholstery and cockpit

Eco Bond Flooring 4 in 1

One-part SiMP high-elastic strength wood-flooring adhesive

• SiMP Silyl-Modified Polymer
• Ready-to-use, no mixing required
• Solvent and isocyanate free, odorless
• Easy to spread and trowel by spatula with excellent ridge holding consistency
• Rapid grab and high filling capacity
• Suitable for subfloor heating
• Easy to remove from hands and from parquet surface
• No Hazard symbol required

U-Primer 199 DC

Clear teak deck caulking primer

Activator 420 GL

Adhesion promoter for glass and non-porous substrates

• Float glass and ceramic coated (frit) glass
• Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
• Painted surfaces and coatings (epoxy and polyester painted sheet steel)
• Original PU or MS adhesives cut surface for replacement
• Plastics

Polipur Scioglischiuma

Powerful polyurethane foam cleaner

• Fast reacting to melt fresh foam
• Powerful cleaner also suitable for cleaning tools
• Dual dispenser, both manual and with automatic gun thread

S-Sil Food

One-part, acetoxy-curing, low-modulus silicone sealant for sealing and glazing food equipment materials and drinking water contact. Certified according to ANSI/NSF Standard 51.

• 100% Silicone, free from solvents
• Suitable for food and drinking water contact
• Rapid crosslinking, short skin time
• Adheres excellently to glass and vitrified surfaces, plastics and most coatings
• Non-sagging, low shrinkage
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high temperatures (+100°C)

U-Seal 550FC

High thixotropy, fast curing one-part polyurethane elastic adhesive and sealant, which is PVC-free and odorless

• One-component polyurethane
• Cold applied
• Wide spectrum of adhesion
• Non-sag, exceptional thixotropy and short cut-off string
• Bonds and seals at the same time
• Very fast curing through volume
• Over-paintable, even in a short time, with many water and solvent based paints (preliminary tests recommended)
• Can be easily tooled, brushed and smoothed
• Capable of withstanding high dynamic stresses
• Permanently flexible
• Vibration and sound dampening properties

S Bond W4

SiMP Crystal

One-part SiMP crystal clear elastic adhesive and sealant

• Crystal clear
• Excellent resistance to ageing, weathering; color stable, non-yellowing and non-chalking
• Environmentally friendly – Free of isocyanates and solvents
• No hazard symbol required
• No bubble formation - Odorless
• Bonds and seals at the same time 
• Permanently elastic
• Easy to gun with excellent tooling consistency
• Exceptional thixotropy, non-sagging, short cut off string
• No change in volume, no shrinkage
• Good primerless adhesion on all typical construction and industrial materials
• Non-staining on concrete and porous materials

Felt Applicator

Silcoflex 581 Cristallino

One-part, acetoxy-curing, highly transparent universal silicone sealant

• Rapid crosslinking, short skin time
• Highly transparent
• Adheres excellently to glass, vitrified surfaces and ceramic tiles
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) temperatures

U-Seal 204 Speed

High decking, fast curing one-part polyurethane direct glazing & structural bonding adhesive. 1 hour Drive Away Time Compliant

• One-component polyurethane
• Solvent free, odorless
• Fast curing
• Suitable for cold and warm application
• Outstanding thixotropy, high decking, non-sagging
• High viscosity, high green strength
• High Modulus - maintains torsional rigidity and increases the vehicles NVH values
• Capable of withstanding high dynamic stresses
• Suitable for use with integral aerials

Cleaner E

Professional industrial cleaner and remover

SiMP-Seal 640

Multipurpose, wide spectrum adhesion one-part SiMP elastic adhesive and sealant

• SiMP Silyl-Modified Polymer
• Solvent and isocyanate free
• Excellent resistance to ageing and weathering; color stable and non-yellowing
• Outstanding thixotropy, non-sagging, short cut-off string
• Permanently flexible over a wide range of temperatures
• No bubble formation
• Easy to gun with excellent tooling consistency
• Excellent primerless adhesion on all typical construction and industrial materials and substrates
• Neutral behavior, does not attack support surface
• No Hazard symbol required
• Over-paintable with many water and solvent based paints (preliminary tests recommended)

SiMP-Seal 650

Multipurpose one-part SiMP elastic adhesive and sealant. Completely odorless and very low emissions

• SiMP Silyl-Modified Polymer
• Solvent and isocyanate free. No Hazard symbol required
• Emicode EC1 certified with very low emission, thanks to its specific formulation
• Completely odorless
• Excellent resistance to ageing and weathering
• Completely color stable
• White color as pure and non-yellowish
• Outstanding thixotropy, non-sagging, short cut-off string
• Permanently flexible over a wide range of temperatures
• No bubble formation
• Easy to gun with excellent tooling consistency
• Excellent primerless adhesion on all typical construction and industrial materials and substrates
• Neutral behavior, does not attack support surface
• Over-paintable with many water and solvent based paints (preliminary tests recommended)
• Short time resistant up to +180 °C for powder and thermal coating

Silcoflex 599

One-part, neutral alkoxy-curing, low modulus silicone sealant for facade and glazing applications

• Rapid crosslinking, short skin time
• Primerless adhesion to most materials
• Solvent-free, with limited volume shrinkage during vulcanization
• Non-corrosive to metals
• Excellent tooling characteristics for professional use
• Suitable for alkaline substrates such as concrete, mortar, fibrous cement
• Matt finish, odourless
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) temperatures

SiMP Ultra Tack

Ultra-high grab and extreme green strength one-part, SiMP elastic assembly adhesive

• SiMP Silyl-Modified Polymer
• Solvent and isocyanate free, odourless
• Outstanding thixotropy, non-sagging, short cut-off string
• Extreme green strength: Ultra high grab and load bearing capacity
• High mechanical and dynamic stress resistance
• Shock and impact resistance
• Vibration and sound damping properties
• Increases torsion stiffness in final assembly
• Very good flow already from +5°C; maximum grab still at +35°C
• No bubble formation
• Excellent primerless adhesion on all typical industrial materials and substrates
• Non-staining. Neutral behavior, does not attack support surface
• No Hazard symbol required. Odorless
• Over-paintable with many water and solvent based paints (preliminary tests recommended)

Silcoflex 589

One-part, acetoxy-curing, low modulus silicone sealant for glazing and sealing of window frames

• 100% Silicone, free from solvents
• Rapid crosslinking, short skin time
• Adheres excellently to glass, vitrified surfaces and ceramic tiles
• Resistant to molds and bacteria
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) temperatures

Activator 440 W

Adhesion promoter for primerless direct glazing applications

• Float glass and ceramic coated (frit) glass
• Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
• Painted surfaces and coatings (epoxy and polyester painted sheet steel)
• Original PU or MS adhesives cut surface for replacement

Activator 400 NP

Adhesion promoter for non-porous substrates

• Plastics, fiberglass and other synthetic non-porous materials
• Painted surfaces and coatings (epoxy and polyester painted sheet steel)
• Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
• Float glass and ceramic coated (frit) glass

Glass Wipe Cleaner

Single use cleaner and remover wipe

U-Seal 207 Plus

AGR aftermarket and BTR industry one-part polyurethane direct glazing & structural bonding adhesive

• One-component polyurethane
• Solvent free, odorless
• Short cut-off string
• Suitable for cold and warm application
• Outstanding thixotropy, good decking, non-sagging
• High Modulus - maintains torsional rigidity and increases the vehicles NVH values
• Capable of withstanding high dynamic stresses
• High UV, weathering and ageing resistance and color stability
• Suitable for use with integral aerials

Silcoflex 470

One-part, acetoxy-curing, universal silicone sealant. Mold-resistant.

• Rapid crosslinking, short skin time
• Adheres excellently to glass and vitrified surfaces, plastics and most coatings
• Suitable for sanitary areas
• Resistant to molds and bacteria
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) temperatures

Polipur B2 Termoacustica

One-part high thermal and acoustic insulation polyurethane foam. For manual or gun application.

• High quality professional polyurethane foam
• Excellent stability; no shrinkage
• High thermal and acoustic insulation
• Provides very good sound reduction and avoids air loss
• Reaction to fire: class B2 Fire retardant (DIN 4102)
• High adhesion power to most building materials
• High yield aerosol can 750ml for automatic gun application
• Paintable

U-Seal 207 SA

Special Adhesion AGR aftermarket one-part polyurethane direct glazing & structural bonding adhesive

• One-component polyurethane
• Solvent free, odorless
• Primerless to glass, ceramic frit and painted metal
• Short cut-off string
• Suitable for cold and warm application
• Outstanding thixotropy, good decking, non-sagging
• High Modulus - maintains torsional rigidity and increases the vehicles NVH values
• Capable of withstanding high dynamic stresses
• High UV, weathering and ageing resistance
• Suitable for use with integral aerials

Silcoflex 585

One-part, acetoxy-curing, low modulus silicone sealant. Mold-resistant sanitary sealant

• 100% Silicone, free from solvents
• Rapid crosslinking, short skin time
• Adheres excellently to glass, vitrified surfaces and ceramic tiles
• Dedicated to sanitary areas
• Resists to molds and bacteria
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) temperatures

CSG 210 Gun

Pneumatic gun for cartridges

Silcoflex 590

One-part neutral alkoxy-curing low modulus silicone sealant for indoor and outdoor applications

• Rapid crosslinking, short skin time
• Primerless adhesion to most materials
• Non-corrosive to metals
• Suitable for alkaline substrates such as concrete, mortar, fibrous cement
• Adheres excellently to glass and metals
• Contains fugicides, suitable for use in sanitary areas
• Odourless
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) temperatures

PM3 – Spray Gun

Pneumatic gun for sprayable sealants

SiMP 2K Fast

• Privo di solventi ed isocianati
• Tempo aperto 4 min a 23°C - 50%UR
• Tempo di presa 30 min
• Perfettamente flessibile
• Sovraverniciabile con vernici a base solvente e a base acqua

U-Seal 208 BTR

Ultra-high viscosity for Bus, Truck & Rail industry one-part polyurethane direct glazing & structural bonding adhesive

• One-component polyurethane
• Solvent free, odorless
• Fast curing. Short cut-off string
• Suitable for cold and warm application
• Outstanding thixotropy, high decking, non-sagging
• High viscosity – high initial tack
• High Modulus - maintains torsional rigidity and increases the vehicles NVH values
• Capable of withstanding high dynamic stresses
• High UV, weathering and ageing resistance and color stability
• Allow best appearance for aesthetical purposes