Body repair & Refinishing
Marine
Marine Assembly
Transportation
Transportation Assembly
Return to: Industry

U-Bond Ultra 2K

Adesivo poliuretanico bicomponente strutturale - 30 minuti

Particolarmente idoneo in ambito industriale per l’incollaggio strutturale tra parti in plastica e metallo o metallo con metallo.
  • Inodore e senza solventi
  • Presa estremamente rapida
  • Carteggiabile e sovra verniciabile
  • Saldabile a punti prima della polimerizzazione

There aren't downloads

There aren't other information

You might be interested in


  • Placeholder

    Activator 420 GL
    Adhesion promoter for glass and non-porous substrates

    • Float glass and ceramic coated (frit) glass
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Original PU or MS adhesives cut surface for replacement
    • Plastics
  • X-BOND Two-component adhesive

    X-Bond
    Extreme bonding two-parts acrylate structural adhesive for polyolefins

    • Low surface tension materials bonding
    • No specific surface preparation
    • Fast curing
    • High cohesive resistance, peeling and shear strength
  • automotive adhesive, sealing and bonding in car body, U-SEAL 500

    U-Seal 500
    One-part polyurethane multipurpose adhesive sealant

    • Bonds and seals at the same time
    • Permanently elastic; accommodates joint movement of ±25%
    • Easy to gun with excellent tooling consistency
    • Good thixotropy, non-sagging
    • Shock and impact resistance
    • Vibration and sound dampening properties
    • Excellent primerless adhesion on all typical construction and industrial materials
    • Elastic bonding between metal, plastic, glass and other materials
    • Non-staining. Neutral behavior, does not attack support surface
    • Good resistance to ageing, weathering and cleansing agents, sea water, lime water
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
  • U-SEAL 501, polyurethane elastic adhesive and sealant

    U-Seal 501
    Very fast curing car body repair one-part polyurethane elastic adhesive and sealant

    • One-component polyurethane
    • Cold applied
    • Wide spectrum of ahesion
    • Bonds and seals at the same time
    • Very fast skinning and curing time
    • Over-paintable, even in a short time, with many water and solvent based paints (preliminary tests recommended)
    • Can be easily tooled, brushed and smoothed
    • Capable of withstanding high dynamic stresses
    • Permanently flexible
    • Vibration and sound dampening properties

  • SiMP-Seal 640
    Multipurpose, wide spectrum adhesion one-part SiMP elastic adhesive and sealant

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free
    • Excellent resistance to ageing and weathering; color stable and non-yellowing
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Neutral behavior, does not attack support surface
    • No Hazard symbol required
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
  • Placeholder

    Brushable Seam Sealant
    Car body repair one-part brushable seam sealant

    • Cold applied
    • Over-paintable, with many water and solvent based paints (preliminary tests recommended)
    • Can be easily tooled, brushed and smoothed
    • Corrosion protective
  • Placeholder

    Activator 400 NP
    Adhesion promoter for non-porous substrates

    • Plastics, fiberglass and other synthetic non-porous materials
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Float glass and ceramic coated (frit) glass
  • primer

    Felt Applicator

  • Placeholder

    SiMP-Seal 650
    Multipurpose one-part SiMP elastic adhesive and sealant. Completely odorless and very low emissions

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free. No Hazard symbol required
    • Emicode EC1 certified with very low emission, thanks to its specific formulation
    • Completely odorless
    • Excellent resistance to ageing and weathering
    • Completely color stable
    • White color as pure and non-yellowish
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Neutral behavior, does not attack support surface
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
    • Short time resistant up to +180 °C for powder and thermal coating
  • Placeholder

    Cleaner E
    Professional industrial cleaner and remover


  • G+S Cleaner
    Professional foam cleaning agent

    • Active formula aggressive on contaminants
    • Foaming action allow to identify contaminant areas
    • Spray-on/wipe-off foam
    • Does not run
    • Fast dying and residue-free action
    • Efficient as cutout lubricant
    • Efficient as smoothing agent for beading, leaving no traces
    • Efficient as dry cleaner for external body parts and internal upholstery and cockpit
  • Placeholder

    Glass Wipe Cleaner
    Single use cleaner and remover wipe

  • Placeholder

    U-Seal 207 SA
    Special Adhesion AGR aftermarket one-part polyurethane direct glazing & structural bonding adhesive

    • One-component polyurethane
    • Solvent free, odorless
    • Primerless to glass, ceramic frit and painted metal
    • Short cut-off string
    • Suitable for cold and warm application
    • Outstanding thixotropy, good decking, non-sagging
    • High Modulus - maintains torsional rigidity and increases the vehicles NVH values
    • Capable of withstanding high dynamic stresses
    • High UV, weathering and ageing resistance
    • Suitable for use with integral aerials
  • Placeholder

    SiMP-Seal 45 UV
    Highly UV and weather resistant one-part SiMP elastic adhesive and sealant

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free, odourless
    • Extremely high UV, ageing and weather resistance
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No change in volume – No shrinkage
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Non-staining. Neutral behavior, does not attack support surface
    • No Hazard symbol required
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
  • Placeholder

    U-Seal 204 Speed
    High decking, fast curing one-part polyurethane direct glazing & structural bonding adhesive. 1 hour Drive Away Time Compliant

    • One-component polyurethane
    • Solvent free, odorless
    • Fast curing
    • Suitable for cold and warm application
    • Outstanding thixotropy, high decking, non-sagging
    • High viscosity, high green strength
    • High Modulus - maintains torsional rigidity and increases the vehicles NVH values
    • Capable of withstanding high dynamic stresses
    • Suitable for use with integral aerials
  • polymer adhesives, One-part hybrid polymer sprayable adhesive and sealant, SIMP SPRAY

    SiMP Spray
    One-part hybrid polymer sprayable adhesive and sealant

    • Free of isocyanates and solvents. Odourless
    • Application by spray or by paintbrush
    • No bubble formation
    • Protects against corrosion; does not attack support surfaces
    • Excellent weathering and UV resistance
    • Over-paintable wet on wet (preliminary tests recommended)
  • Elastoplastic butyl sealant

    Butaflex 200
    Elastoplastic butyl sealant

    • Excellent adhesion to metals and plastics
    • Good ageing resistance
    • Remains elastoplastic
  • Placeholder

    Activator 440 W
    Adhesion promoter for primerless direct glazing applications

    • Float glass and ceramic coated (frit) glass
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Original PU or MS adhesives cut surface for replacement

  • U-Seal 550FC
    High thixotropy, fast curing one-part polyurethane elastic adhesive and sealant, which is PVC-free and odorless

    • One-component polyurethane
    • Cold applied
    • Wide spectrum of adhesion
    • Non-sag, exceptional thixotropy and short cut-off string
    • Bonds and seals at the same time
    • Very fast curing through volume
    • Over-paintable, even in a short time, with many water and solvent based paints (preliminary tests recommended)
    • Can be easily tooled, brushed and smoothed
    • Capable of withstanding high dynamic stresses
    • Permanently flexible
    • Vibration and sound dampening properties

  • U-Primer 199 DC
    Clear teak deck caulking primer

  • Placeholder

    SiMP 2K Fast

    • Privo di solventi ed isocianati
    • Tempo aperto 4 min a 23°C - 50%UR
    • Tempo di presa 30 min
    • Perfettamente flessibile
    • Sovraverniciabile con vernici a base solvente e a base acqua
  • automotive industry adhesive, U-BOND ULTRA 2K 5MIN 50ML

    U-Bond Ultra 2K
    Adesivo poliuretanico bicomponente strutturale - 1-5 minuti

    • Rapido indurimento
    • Carteggiabile e sovra verniciabile
    • Colore nero