Return to: Construction
Primerless, high green strength hybrid polymer direct glazing adhesive sealant

SiMP-Seal 65

Primerless, high green strength hybrid polymer direct glazing adhesive sealant
SiMP-Seal 65 is a flexible and high performance one-component Silyl-terminated polymer (SiMP) adhesive sealant for the primerless direct glazing of vehicle glass. It is suitable for the bonding of windshields and side or rear windows of cars, buses, trucks, cabins and special vehicles. Ideal for the bonding of fibreglass reinforced plastic elements (roof, side and frontal panels) to structures.   DRIVE AWAY TIME: 4 hours on vehicles fitted with both driver & passenger airbags.
  • Primerless adhesion
  • One-component isocyanate solvent free Silyl-terminated polymer (SiMP)
  • Non sag, with short cut-off string. High green strength

There aren't other information

You might be interested in

  • SiMP 2K Fast
    • Fast strength build-up, handling strength achieved after 60 minutes
    • Simple processing
    • Does not sag or run
    • Very wide primerless adhesion range
    • Suitable for general purpose bonding
    • Neutral behaviour, does not attack support surfaces
    • High mechanical and dynamic stress resistance
    • Impact and vibration resistant (shock absorbing)
    • Spot weldable before curing
    • May be sanded and overpainted
    • Solvent free, odourless
  • CSG 210 Gun
    Pneumatic gun for cartridges
  • SiMP Fix Crystal
    One-part SiMP crystal clear elastic adhesive and sealant
    • Crystal clear
    • Excellent resistance to ageing, weathering; color stable, non-yellowing and non-chalking
    • Environmentally friendly – Free of isocyanates and solvents
    • No hazard symbol required
    • No bubble formation - Odorless
    • Bonds and seals at the same time
    • Permanently elastic
    • Easy to gun with excellent tooling consistency
    • Exceptional thixotropy, non-sagging, short cut off string
    • No change in volume, no shrinkage
    • Good primerless adhesion on all typical construction and industrial materials
    • Non-staining on concrete and porous materials
  • Eco Bond Flooring 4 in 1
    One-part SiMP high-elastic strength wood-flooring adhesive
    • SiMP Silyl-Modified Polymer
    • Ready-to-use, no mixing required
    • Solvent and isocyanate free, odorless
    • Acting as a vapor barrier by providing very low vapor permeability
    • Supplying sound insulation due to a reduced impact sound pressure level
    • Having an anti-shock system that guarantees strength and adhesion under real working conditions
    • Having very low VOC emissions certified by EMICODE EC1 PLUS
    • No Hazard symbol required
  • Placeholder
    SiMP Ultra Tack
    Ultra-high grab and extreme green strength one-part, SiMP elastic assembly adhesive
    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free, odourless
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Extreme green strength: Ultra high grab and load bearing capacity
    • High mechanical and dynamic stress resistance
    • Shock and impact resistance
    • Vibration and sound damping properties
    • Increases torsion stiffness in final assembly
    • Very good flow already from +5°C; maximum grab still at +35°C
    • No bubble formation
    • Excellent primerless adhesion on all typical industrial materials and substrates
    • Non-staining. Neutral behavior, does not attack support surface
    • No Hazard symbol required. Odorless
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
  • Silcoflex 595
    One-part, neutral oxime-curing, silicone sealant for indoor and outdoor applications
    • Rapid crosslinking, short skin time
    • Primerless adhesion to most materials
    • Non-corrosive to metals
    • Suitable for alkaline substrates such as concrete, mortar, fibrous cement
    • Adheres excellently to glass and metals
    • Contains fungicides, suitable for use in sanitary areas
    • Odourless
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures
  • U-SEAL 906 AS
    One-part, hydrophilic swelling polyurethane adhesive and sealant
    • Bonds and seals at the same time
    • May be applied on damp surfaces
    • Good thixotropy, non-sagging
    • One-component, east and fast application
    • Excellent primerless adhesion on concrete, plastic, metal and bentonitic stripes
    • Swells in contact with water
    • Expansion rate increasing over time up to 450%, without damage to uncured concrete
    • Resistant to pressures up to 5 bar
    • Returns to the original volume in absence of water
    • Solvent free
  • SiMP-Seal 650
    Multipurpose one-part SiMP elastic adhesive and sealant. Completely odorless and very low emissions
    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free. No Hazard symbol required
    • Emicode EC1 certified with very low emission, thanks to its specific formulation
    • Completely odorless
    • Excellent resistance to ageing and weathering
    • Completely color stable
    • White color as pure and non-yellowish
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Neutral behavior, does not attack support surface
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
    • Short time resistant up to +180 °C for powder and thermal coating
  • PM3 – Spray Gun
    Pneumatic gun for sprayable sealants
  • Placeholder
    S Bond W4