Auto Glass Replacement
Automotive Aftermarket
General Industry
Sealing & Bonding
Transportation
Transportation Assembly
Transportation Glass Replacement
Vehicle Care & Maintenance

SiMP ADVANCED 70 UP

FEATURES

SiMP Advanced 70 UP is a one-component, gun-grade, non-sagging SiMP-Advanced –Silyl Modified Polymer primerless to glasselastic adhesive. It cures under the influence of atmospheric moisture to form a high performance, permanently flexible elastic adhesive for windscreens and general assembly with outstanding bodyand ultimate mechanical performances. Certified according to:
  • ISEGA EC Regulation 1935/2004 for food contact
  • EMICODE EC 1PLUSprotocol
  • EUROFINS IAC GOLD protocol
  • VOC Emission class label A+
  • EN 45545-2 R1 & R7
  • VDA-278 Method
AREAS OF APPLICATION Specifically addressed to the glass replacing and installation of front, side and rear windshields in the sector of Bus, Truck, Railway and industrial vehicles. Thanks to its high viscosity it guarantees a very high initial tack and is suitable for the application of large surfaces glasses typical in the BTR. Suitable for elastic structural bonding (assembly of various materials which are subjected to high thermal and dynamic stress) in the transportation Industry, where a powerful elastic adhesive with ultimate mechanical performances, high green strengthand quick strength build-up is required.  
  • SiMP-Advanced: ultimate mechanical performancesSilyl-Modified Polymer
  • Solvent and isocyanate free, odorless
  • Outstanding thixotropy, non-sagging, short cut-off string
  • High green strength: instant grab and load bearing capacity
  • High mechanical and dynamic stress resistance
  • Shock and impact resistance
  • Vibration and sound damping properties
  • Increase torsional stiffness of final assembly
  • Excellent primerless adhesion on all typical industrial materials and substrates
  • Non-staining. Neutral behavior, does not attack support surface
  • No Hazard symbol required
  • Permanently flexible over a wide range of temperatures
  • Over-paintable with many water and solvent based paints (preliminary tests recommended)
  • No bubble formation

You might be interested in



  • Activator 440 W
    Adhesion promoter for primerless direct glazing applications

    • Float glass and ceramic coated (frit) glass
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Original PU or MS adhesives cut surface for replacement

  • Activator 420 GL
    Adhesion promoter for glass and non-porous substrates

    • Float glass and ceramic coated (frit) glass
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Original PU or MS adhesives cut surface for replacement
    • Plastics

  • U-Seal 204 Speed
    High decking, fast curing one-part polyurethane direct glazing & structural bonding adhesive. 1 hour Drive Away Time Compliant

    • One-component polyurethane
    • Solvent free, odorless
    • Fast curing
    • Suitable for cold and warm application
    • Outstanding thixotropy, high decking, non-sagging
    • High viscosity, high green strength
    • High Modulus - maintains torsional rigidity and increases the vehicles NVH values
    • Capable of withstanding high dynamic stresses
    • Suitable for use with integral aerials

  • G+S Cleaner
    Professional foam cleaning agent

    • Active formula aggressive on contaminants
    • Foaming action allow to identify contaminant areas
    • Spray-on/wipe-off foam
    • Does not run
    • Fast dying and residue-free action
    • Efficient as cutout lubricant
    • Efficient as smoothing agent for beading, leaving no traces
    • Efficient as dry cleaner for external body parts and internal upholstery and cockpit
  • Placeholder

    Brushable Seam Sealant
    Car body repair one-part brushable seam sealant

    • Cold applied
    • Over-paintable, with many water and solvent based paints (preliminary tests recommended)
    • Can be easily tooled, brushed and smoothed
    • Corrosion protective

  • U-Seal 207 Plus
    AGR aftermarket and BTR industry one-part polyurethane direct glazing & structural bonding adhesive

    • One-component polyurethane
    • Solvent free, odorless
    • Short cut-off string
    • Suitable for cold and warm application
    • Outstanding thixotropy, good decking, non-sagging
    • High Modulus - maintains torsional rigidity and increases the vehicles NVH values
    • Capable of withstanding high dynamic stresses
    • High UV, weathering and ageing resistance and color stability
    • Suitable for use with integral aerials

  • SiMP-Seal 640
    Multipurpose, wide spectrum adhesion one-part SiMP elastic adhesive and sealant

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free
    • Excellent resistance to ageing and weathering; color stable and non-yellowing
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Neutral behavior, does not attack support surface
    • No Hazard symbol required
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)

  • U-Bond Ultra 2K Assembly
    Structural assembly two-parts polyurethane adhesive

    • Odorless and solvent free
    • Extremely quick grip and curing
    • Spot weldable before curing
    • May be sanded or overpainted

  • SiMP Fix Crystal
    One-part SiMP crystal clear elastic adhesive and sealant

    • Crystal clear
    • Excellent resistance to ageing, weathering; color stable, non-yellowing and non-chalking
    • Environmentally friendly – Free of isocyanates and solvents
    • No hazard symbol required
    • No bubble formation - Odorless
    • Bonds and seals at the same time
    • Permanently elastic
    • Easy to gun with excellent tooling consistency
    • Exceptional thixotropy, non-sagging, short cut off string
    • No change in volume, no shrinkage
    • Good primerless adhesion on all typical construction and industrial materials
    • Non-staining on concrete and porous materials

  • Activator 400 NP
    Adhesion promoter for non-porous substrates

    • Plastics, fiberglass and other synthetic non-porous materials
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Float glass and ceramic coated (frit) glass

  • U-Seal 550FC
    High thixotropy, fast curing one-part polyurethane elastic adhesive and sealant, which is PVC-free and odorless

    • One-component polyurethane
    • Cold applied
    • Wide spectrum of adhesion
    • Non-sag, exceptional thixotropy and short cut-off string
    • Bonds and seals at the same time
    • Very fast curing through volume
    • Over-paintable, even in a short time, with many water and solvent based paints (preliminary tests recommended)
    • Can be easily tooled, brushed and smoothed
    • Capable of withstanding high dynamic stresses
    • Permanently flexible
    • Vibration and sound dampening properties
  • Placeholder

    S Bond W4


  • SiMP 2K Fast

    • Fast strength build-up, handling strength achieved after 60 minutes
    • Simple processing
    • Does not sag or run
    • Very wide primerless adhesion range
    • Suitable for general purpose bonding
    • Neutral behaviour, does not attack support surfaces
    • High mechanical and dynamic stress resistance
    • Impact and vibration resistant (shock absorbing)
    • Spot weldable before curing
    • May be sanded and overpainted
    • Solvent free, odourless
  • Moisture-curing black primer for glass - Felt applicator - Nitrile Gloves

    U-Primer 130
    Black, moisture curing, one-step glass primer

  • U-SEAL 209 PRIMERLESS, polyurethane adhesive for automotive direct glazing

    U-Seal 209 Primerless
    High viscosity and decking, primerless adhesion one-part polyurethane direct glazing & structural bonding adhesive

    • One-component polyurethane
    • Solvent free, odorless
    • Primerless to glass, ceramic frit and painted metal
    • Short cut-off string
    • Suitable for cold and warm application
    • Outstanding thixotropy, high decking, non-sagging
    • High Modulus - maintains torsional rigidity and increases the vehicles NVH values
    • Capable of withstanding high dynamic stresses
    • High UV, weathering and ageing resistance and color stability
    • Suitable for use with integral aerials

  • SiMP-Seal 650
    Multipurpose one-part SiMP elastic adhesive and sealant. Completely odorless and very low emissions

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free. No Hazard symbol required
    • Emicode EC1 certified with very low emission, thanks to its specific formulation
    • Completely odorless
    • Excellent resistance to ageing and weathering
    • Completely color stable
    • White color as pure and non-yellowish
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Neutral behavior, does not attack support surface
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
    • Short time resistant up to +180 °C for powder and thermal coating
  • automotive industry adhesive, U-BOND ULTRA 2K 5MIN 50ML

    U-Bond Ultra 2K – 1 & 5 min
    Plastic repair two-parts polyurethane adhesive

    • Odorless and solvent free
    • Extremely quick full curing
    • Spot weldable before curing
    • Convenient as gap filler. May be sanded and overpainted
  • Placeholder

    U-Seal 207 SA
    Special Adhesion AGR aftermarket one-part polyurethane direct glazing & structural bonding adhesive

    • One-component polyurethane
    • Solvent free, odorless
    • Primerless to glass, ceramic frit and painted metal
    • Short cut-off string
    • Suitable for cold and warm application
    • Outstanding thixotropy, good decking, non-sagging
    • High Modulus - maintains torsional rigidity and increases the vehicles NVH values
    • Capable of withstanding high dynamic stresses
    • High UV, weathering and ageing resistance
    • Suitable for use with integral aerials

  • Cleaner E
    Professional industrial cleaner and remover


  • Glass Wipe Cleaner
    Single use cleaner and remover wipe

  • primer

    Felt Applicator


  • U-Seal 208 BTR
    Ultra-high viscosity for Bus, Truck & Rail industry one-part polyurethane direct glazing & structural bonding adhesive

    • One-component polyurethane
    • Solvent free, odorless
    • Fast curing. Short cut-off string
    • Suitable for cold and warm application
    • Outstanding thixotropy, high decking, non-sagging
    • High viscosity – high initial tack
    • High Modulus - maintains torsional rigidity and increases the vehicles NVH values
    • Capable of withstanding high dynamic stresses
    • High UV, weathering and ageing resistance and color stability
    • Allow best appearance for aesthetical purposes