Activator 420 GL

Activator 440 W

Adhesion promoter for primerless direct glazing applications

• Float glass and ceramic coated (frit) glass
• Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
• Painted surfaces and coatings (epoxy and polyester painted sheet steel)
• Original PU or MS adhesives cut surface for replacement

Cleaner E

Professional industrial cleaner and remover

SiMP-Seal 640

Multipurpose, wide spectrum adhesion one-part SiMP elastic adhesive and sealant

• SiMP Silyl-Modified Polymer
• Solvent and isocyanate free
• Excellent resistance to ageing and weathering; color stable and non-yellowing
• Outstanding thixotropy, non-sagging, short cut-off string
• Permanently flexible over a wide range of temperatures
• No bubble formation
• Easy to gun with excellent tooling consistency
• Excellent primerless adhesion on all typical construction and industrial materials and substrates
• Neutral behavior, does not attack support surface
• No Hazard symbol required
• Over-paintable with many water and solvent based paints (preliminary tests recommended)

G+S Cleaner

Professional foam cleaning agent

• Active formula aggressive on contaminants
• Foaming action allow to identify contaminant areas
• Spray-on/wipe-off foam
• Does not run
• Fast dying and residue-free action
• Efficient as cutout lubricant
• Efficient as smoothing agent for beading, leaving no traces
• Efficient as dry cleaner for external body parts and internal upholstery and cockpit

U-Seal 550FC

High thixotropy, fast curing one-part polyurethane elastic adhesive and sealant, which is PVC-free and odorless

• One-component polyurethane
• Cold applied
• Wide spectrum of adhesion
• Non-sag, exceptional thixotropy and short cut-off string
• Bonds and seals at the same time
• Very fast curing through volume
• Over-paintable, even in a short time, with many water and solvent based paints (preliminary tests recommended)
• Can be easily tooled, brushed and smoothed
• Capable of withstanding high dynamic stresses
• Permanently flexible
• Vibration and sound dampening properties

SiMP-Seal Teak 680

Watertight, saltwater and UV resistant one-part SiMP teak decks sealant

• SiMP Silyl-Modified Polymer
• Solvent and isocyanate free. Odorless
• Good ageing and weather resistance
• No bubble formation
• Easy to gun with excellent tooling consistency
• No Hazard symbol required
• Excellent weathering resistance - extremely good color stability and UV resistance
• Long term resistance against fresh and salt water
• No gas reaction – Bubbles free, no bulging and shrinking
• Permanently flexible in a temperature range of -40°C to +100°C
• Can be sanded after curing

U-Primer 130

Black, moisture curing, one-step glass primer

Felt Applicator

U-Seal 207 Plus

AGR aftermarket and BTR industry one-part polyurethane direct glazing & structural bonding adhesive

• One-component polyurethane
• Solvent free, odorless
• Short cut-off string
• Suitable for cold and warm application
• Outstanding thixotropy, good decking, non-sagging
• High Modulus - maintains torsional rigidity and increases the vehicles NVH values
• Capable of withstanding high dynamic stresses
• High UV, weathering and ageing resistance and color stability
• Suitable for use with integral aerials

U-Bond Ultra 2K Assembly

Structural assembly two-parts polyurethane adhesive

• Odorless and solvent free
• Extremely quick grip and curing
• Spot weldable before curing
• May be sanded or overpainted

SiMP ADVANCED 70 UP

Ultimate mechanical strength, primerless to glass one-part SiMP-Advanced elastic adhesive

• SiMP-Advanced: ultimate mechanical performancesSilyl-Modified Polymer
• Solvent and isocyanate free, odorless
• Outstanding thixotropy, non-sagging, short cut-off string
• High green strength: instant grab and load bearing capacity
• High mechanical and dynamic stress resistance
• Shock and impact resistance
• Vibration and sound damping properties
• Increase torsional stiffness of final assembly
• Excellent primerless adhesion on all typical industrial materials and substrates
• Non-staining. Neutral behavior, does not attack support surface
• No Hazard symbol required
• Permanently flexible over a wide range of temperatures
• Over-paintable with many water and solvent based paints (preliminary tests recommended)
• No bubble formation

S-Bond Deck

One-part SiMP boat deck adhesive

• SiMP Silyl-Modified Polymer
• Ready-to-use, no mixing required
• Solvent and isocyanate free, odorless
• Very low emission according to EMICODE EC1 PLUS
• Fast curing with possibility to be combined to a booster
• No bulging or bubbling effect
• Easy to spread and trowel by spatula
• Easy to remove from hands and from parquet surface
• No Hazard symbol required
• Long term resistance to fresh water, sea water, diluted aqueous cleansing agents

SiMP 2K Fast

• Fast strength build-up, handling strength achieved after 60 minutes
• Simple processing
• Does not sag or run
• Very wide primerless adhesion range
• Suitable for general purpose bonding
• Neutral behaviour, does not attack support surfaces
• High mechanical and dynamic stress resistance
• Impact and vibration resistant (shock absorbing)
• Spot weldable before curing
• May be sanded and overpainted
• Solvent free, odourless

SiMP-Seal 650

Multipurpose one-part SiMP elastic adhesive and sealant. Completely odorless and very low emissions

• SiMP Silyl-Modified Polymer
• Solvent and isocyanate free. No Hazard symbol required
• Emicode EC1 certified with very low emission, thanks to its specific formulation
• Completely odorless
• Excellent resistance to ageing and weathering
• Completely color stable
• White color as pure and non-yellowish
• Outstanding thixotropy, non-sagging, short cut-off string
• Permanently flexible over a wide range of temperatures
• No bubble formation
• Easy to gun with excellent tooling consistency
• Excellent primerless adhesion on all typical construction and industrial materials and substrates
• Neutral behavior, does not attack support surface
• Over-paintable with many water and solvent based paints (preliminary tests recommended)
• Short time resistant up to +180 °C for powder and thermal coating

U-Seal 208 BTR

Ultra-high viscosity for Bus, Truck & Rail industry one-part polyurethane direct glazing & structural bonding adhesive

• One-component polyurethane
• Solvent free, odorless
• Fast curing. Short cut-off string
• Suitable for cold and warm application
• Outstanding thixotropy, high decking, non-sagging
• High viscosity – high initial tack
• High Modulus - maintains torsional rigidity and increases the vehicles NVH values
• Capable of withstanding high dynamic stresses
• High UV, weathering and ageing resistance and color stability
• Allow best appearance for aesthetical purposes

Glass Wipe Cleaner

Single use cleaner and remover wipe

S Bond W4

U-Bond Ultra 2K – 1 & 5 min

Plastic repair two-parts polyurethane adhesive

• Odorless and solvent free
• Extremely quick full curing
• Spot weldable before curing
• Convenient as gap filler. May be sanded and overpainted

SiMP Fix Crystal

One-part SiMP crystal clear elastic adhesive and sealant

• Crystal clear
• Excellent resistance to ageing, weathering; color stable, non-yellowing and non-chalking
• Environmentally friendly – Free of isocyanates and solvents
• No hazard symbol required
• No bubble formation - Odorless
• Bonds and seals at the same time
• Permanently elastic
• Easy to gun with excellent tooling consistency
• Exceptional thixotropy, non-sagging, short cut off string
• No change in volume, no shrinkage
• Good primerless adhesion on all typical construction and industrial materials
• Non-staining on concrete and porous materials

Activator 400 NP

Adhesion promoter for non-porous substrates

• Plastics, fiberglass and other synthetic non-porous materials
• Painted surfaces and coatings (epoxy and polyester painted sheet steel)
• Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
• Float glass and ceramic coated (frit) glass

SiMP-Seal 60 HV

High decking, fast curing, primerless to glass one-part SiMP elastic structural, windshield & assembly adhesive

• SiMP Silyl-Modified Polymer
• Solvent and isocyanate free, odorless
• Primerless adhesion to glass, metals and plastics
• Fast application and curing
• Suitable for cold application
• Outstanding thixotropy, high decking, non-sagging
• High viscosity, high green strength
• Capable of withstanding high dynamic stresses
• Suitable for use with integral aerials
• Prevents contact corrosion in aluminum-body vehicles
• No Hazard symbol required

Brushable Seam Sealant

Car body repair one-part brushable seam sealant

• Cold applied
• Over-paintable, with many water and solvent based paints (preliminary tests recommended)
• Can be easily tooled, brushed and smoothed
• Corrosion protective