Construction Sealants and Adhesives
Indoor sealing and bonding
Return to: Construction
Seals windows and doors, Seals windows and doors

Polipur EI 180

One-part fire resistant polyurethane foam. For manual application.
One-part fire resistant polyurethane foam. For manual application.  
Polipur EI 180 is a one-part fire resistant insulation and construction assembly polyurethane foam developed to create a resistant seal between construction parts allowing room fire partition. It cures under the influence of environmental moisture.

Application fields
Used in linear joints according to EN 1366-4 in walls, ceilings and floor joints. It has an excellent adhesion on concrete, brick, stone, plaster, wood, metal and many plastics like polystyrene and rigid PU foam. For sealing of windows and doors, fixation of frames of doors and electrical installations, insulation of pipes and plug holes and gaps through walls, where propagation of smoke and flames must be prevented.  
  • High quality professional polyurethane foam
  • Excellent stability; no shrinkage
  • High thermal and acoustic insulation
  • Provides very good sound reduction and avoids air loss
  • Reaction to fire: class B1 self-extinguish (EN 1366-4)
  • High adhesion power to most building materials
  • High yield aerosol can 750ml for manual application
  • Paintable

There aren't other information

You might be interested in

  • SiMP-Seal 650
    Multipurpose one-part SiMP elastic adhesive and sealant. Completely odorless and very low emissions
    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free. No Hazard symbol required
    • Emicode EC1 certified with very low emission, thanks to its specific formulation
    • Completely odorless
    • Excellent resistance to ageing and weathering
    • Completely color stable
    • White color as pure and non-yellowish
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Neutral behavior, does not attack support surface
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
    • Short time resistant up to +180 °C for powder and thermal coating
  • Silcoflex 599
    One-part, neutral alkoxy-curing, low modulus silicone sealant for facade and glazing applications
    • Rapid crosslinking, short skin time
    • Primerless adhesion to most materials
    • Solvent-free, with limited volume shrinkage during vulcanization
    • Non-corrosive to metals
    • Excellent tooling characteristics for professional use
    • Suitable for alkaline substrates such as concrete, mortar, fibrous cement
    • Matt finish, odourless
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures
  • U-SEAL 906 AS
    One-part, hydrophilic swelling polyurethane adhesive and sealant
    • Bonds and seals at the same time
    • May be applied on damp surfaces
    • Good thixotropy, non-sagging
    • One-component, east and fast application
    • Excellent primerless adhesion on concrete, plastic, metal and bentonitic stripes
    • Swells in contact with water
    • Expansion rate increasing over time up to 450%, without damage to uncured concrete
    • Resistant to pressures up to 5 bar
    • Returns to the original volume in absence of water
    • Solvent free
  • PM3 – Spray Gun
    Pneumatic gun for sprayable sealants
  • SiMP Fix Crystal
    One-part SiMP crystal clear elastic adhesive and sealant
    • Crystal clear
    • Excellent resistance to ageing, weathering; color stable, non-yellowing and non-chalking
    • Environmentally friendly – Free of isocyanates and solvents
    • No hazard symbol required
    • No bubble formation - Odorless
    • Bonds and seals at the same time
    • Permanently elastic
    • Easy to gun with excellent tooling consistency
    • Exceptional thixotropy, non-sagging, short cut off string
    • No change in volume, no shrinkage
    • Good primerless adhesion on all typical construction and industrial materials
    • Non-staining on concrete and porous materials
  • construction sealant, glazing sealant, SILCOFLEX 581 CRISTALLINO
    Silcoflex 581 Cristallino
    One-part, acetoxy-curing, highly transparent universal silicone sealant
    • Rapid crosslinking, short skin time
    • Highly transparent
    • Adheres excellently to glass, vitrified surfaces and ceramic tiles
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures
  • sealant for sealing glass
    Silicolor
    One-part, acetoxy-curing, silicone sealant available in 32 colors, mold -resistant.
    • 100% Silicone, free from solvents
    • Rapid crosslinking, short skin time
    • Resistant to molds and bacteria
    • Adheres excellently to glass and vitrified surfaces, plastics and most coatings
    • Specific for sanitary areas
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures
  • Placeholder
    S Bond W4
  • Silcoflex 583
    One-part, acetoxy-curing, high temperature resistant silicone sealant, black
    • Free from solvents
    • Rapid crosslinking, short skin time
    • Adheres excellently to glass and metals
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+250°C) temperatures
  • single-component silicone sealant for sealing and bonding in food applications
    S-Sil Food
    One-part, acetoxy-curing, low-modulus silicone sealant for sealing and glazing food equipment materials and drinking water contact. Certified according to ANSI/NSF Standard 51.
    • 100% Silicone, free from solvents
    • Suitable for food and drinking water contact
    • Rapid crosslinking, short skin time
    • Adheres excellently to glass and vitrified surfaces, plastics and most coatings
    • Non-sagging, low shrinkage
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high temperatures (+100°C)
  • Silcoflex 590
    One-part neutral alkoxy-curing low modulus silicone sealant for indoor and outdoor applications
    • Rapid crosslinking, short skin time
    • Primerless adhesion to most materials
    • Non-corrosive to metals
    • Suitable for alkaline substrates such as concrete, mortar, fibrous cement
    • Adheres excellently to glass and metals
    • Contains fugicides, suitable for use in sanitary areas
    • Odourless
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures
  • Eco Bond Flooring 4 in 1
    One-part SiMP high-elastic strength wood-flooring adhesive
    • SiMP Silyl-Modified Polymer
    • Ready-to-use, no mixing required
    • Solvent and isocyanate free, odorless
    • Acting as a vapor barrier by providing very low vapor permeability
    • Supplying sound insulation due to a reduced impact sound pressure level
    • Having an anti-shock system that guarantees strength and adhesion under real working conditions
    • Having very low VOC emissions certified by EMICODE EC1 PLUS
    • No Hazard symbol required
  • Placeholder
    SiMP Ultra Tack
    Ultra-high grab and extreme green strength one-part, SiMP elastic assembly adhesive
    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free, odourless
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Extreme green strength: Ultra high grab and load bearing capacity
    • High mechanical and dynamic stress resistance
    • Shock and impact resistance
    • Vibration and sound damping properties
    • Increases torsion stiffness in final assembly
    • Very good flow already from +5°C; maximum grab still at +35°C
    • No bubble formation
    • Excellent primerless adhesion on all typical industrial materials and substrates
    • Non-staining. Neutral behavior, does not attack support surface
    • No Hazard symbol required. Odorless
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
  • Silcoflex 595
    One-part, neutral oxime-curing, silicone sealant for indoor and outdoor applications
    • Rapid crosslinking, short skin time
    • Primerless adhesion to most materials
    • Non-corrosive to metals
    • Suitable for alkaline substrates such as concrete, mortar, fibrous cement
    • Adheres excellently to glass and metals
    • Contains fungicides, suitable for use in sanitary areas
    • Odourless
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures
  • SiMP 2K Fast
    • Fast strength build-up, handling strength achieved after 60 minutes
    • Simple processing
    • Does not sag or run
    • Very wide primerless adhesion range
    • Suitable for general purpose bonding
    • Neutral behaviour, does not attack support surfaces
    • High mechanical and dynamic stress resistance
    • Impact and vibration resistant (shock absorbing)
    • Spot weldable before curing
    • May be sanded and overpainted
    • Solvent free, odourless
  • Silcoflex 589
    One-part, acetoxy-curing, low modulus silicone sealant for glazing and sealing of window frames
    • 100% Silicone, free from solvents
    • Rapid crosslinking, short skin time
    • Adheres excellently to glass, vitrified surfaces and ceramic tiles
    • Resistant to molds and bacteria
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures
  • construction sealant for bathroom, SILCOFLEX 585
    Silcoflex 585
    One-part, acetoxy-curing, low modulus silicone sealant. Mold-resistant sanitary sealant
    • 100% Silicone, free from solvents
    • Rapid crosslinking, short skin time
    • Adheres excellently to glass, vitrified surfaces and ceramic tiles
    • Dedicated to sanitary areas
    • Resists to molds and bacteria
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures
  • Silcoflex 587
    One-component silicone sealant with acetic cross-linking, high temperatures resistant
    • Free from solvents
    • Rapid crosslinking, short skin time
    • Adheres excellently to glass and metals
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+250°C) temperatures
  • CSG 210 Gun
    Pneumatic gun for cartridges