Filgum

Silcoflex 590

One-part neutral alkoxy-curing low modulus silicone sealant for indoor and outdoor applications

• Rapid crosslinking, short skin time
• Primerless adhesion to most materials
• Non-corrosive to metals
• Suitable for alkaline substrates such as concrete, mortar, fibrous cement
• Adheres excellently to glass and metals
• Contains fugicides, suitable for use in sanitary areas
• Odourless
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) temperatures

SiMP 2K Fast

• Fast strength build-up, handling strength achieved after 60 minutes
• Simple processing
• Does not sag or run
• Very wide primerless adhesion range
• Suitable for general purpose bonding
• Neutral behaviour, does not attack support surfaces
• High mechanical and dynamic stress resistance
• Impact and vibration resistant (shock absorbing)
• Spot weldable before curing
• May be sanded and overpainted
• Solvent free, odourless

U-Seal 907

One-part polyurethane low modulus construction sealant

• Bonds and seals at the same time
• Permanently elastic; accommodates joint movement of ±50%
• Easy to gun with excellent tooling consistency
• Good thixotropy, non-sagging
• Excellent primerless adhesion on all typical construction and industrial materials
• Non-staining on concrete and porous materials
• Good resistance to ageing, weathering and cleansing agents, sea water, lime water
• Over-paintable with many water and solvent based paints (preliminary tests recommended)

SiMP Coat AR 100 X

One-part SiMP Aria Polymer waterproofing top coat membrane. Breathable, provides water and air barrier and is free of bitumen, solvent and isocyanates

• One component, ready to use: cure starts from adhesion surface and external surface
• Environmentally friendly – free of bitumen, isocyanates and solvents: no smell
• SiMP aliphatic hybrid polymer: totally bubble-free in the surface and the body
• Does not dissolve in water after curing like water-based membranes
• Neutral curing, does not stain, corrode or affect sensible materials like metal, concrete etc.
• Liquid: easy to apply with professional or simple tools, like spatula, brush or roller
• Cold applied: in any situation and any climate
• Full surface adhesion and seamless covering, even on curved surfaces
• In combination with non-woven fabric is suitable to cover details, corners, edges
• Bonds and cures in humid weather and on damp substrates
• Short rain stability time: skin forms after 4 hours and self-protect from rain showers
• Short curing time for short-time application
• Same day application: does not need after- application finishing or reprise
• Provides water vapor permeability, allowing the surface to breathe
• Compatible with most building materials
• Easy to repair in case of damage
• Paintable

Silcoflex 595

One-part, neutral oxime-curing, silicone sealant for indoor and outdoor applications

• Rapid crosslinking, short skin time
• Primerless adhesion to most materials
• Non-corrosive to metals
• Suitable for alkaline substrates such as concrete, mortar, fibrous cement
• Adheres excellently to glass and metals
• Contains fungicides, suitable for use in sanitary areas
• Odourless
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) temperatures

CSG 210 Gun

Pneumatic gun for cartridges

SiMP Ultra Tack

Ultra-high grab and extreme green strength one-part, SiMP elastic assembly adhesive

• SiMP Silyl-Modified Polymer
• Solvent and isocyanate free, odourless
• Outstanding thixotropy, non-sagging, short cut-off string
• Extreme green strength: Ultra high grab and load bearing capacity
• High mechanical and dynamic stress resistance
• Shock and impact resistance
• Vibration and sound damping properties
• Increases torsion stiffness in final assembly
• Very good flow already from +5°C; maximum grab still at +35°C
• No bubble formation
• Excellent primerless adhesion on all typical industrial materials and substrates
• Non-staining. Neutral behavior, does not attack support surface
• No Hazard symbol required. Odorless
• Over-paintable with many water and solvent based paints (preliminary tests recommended)

U-Seal 816

One-part polyurethane self-levelling sealant NPT bubble-free curing LC-Technology

• One part - no mixing on site. Self-levelling consistency
• Bubble-free curing
• Non staining
• Resistant to hydrocarbons, oils and fuels. Bitumen-free
• Primerless adhesion on concrete
• Permanently elastic; accommodates joint movement of ±25%
• Good resistance to ageing, weathering and cleansing agents, sea water, lime water

U-Seal 500

One-part polyurethane multipurpose adhesive sealant

• Bonds and seals at the same time
• Permanently elastic; accommodates joint movement of ±25%
• Easy to gun with excellent tooling consistency
• Good thixotropy, non-sagging
• Shock and impact resistance
• Vibration and sound dampening properties
• Excellent primerless adhesion on all typical construction and industrial materials
• Elastic bonding between metal, plastic, glass and other materials
• Non-staining. Neutral behavior, does not attack support surface
• Good resistance to ageing, weathering and cleansing agents, sea water, lime water
• Over-paintable with many water and solvent based paints (preliminary tests recommended)

U-Coat 850

LC-Technology - Liquid-applied polyurethane waterproofing membrane

• Waterproofing of wet areas (under-tile) in bathrooms, kitchens, balconies, auxiliary rooms, etc
• Waterproofing in new or existing concrete floor slabs and roofs
• Liquid: easy to apply with professional or simple tools, like brush or roller
• Full surface adhesion and seamless covering, even on curved surfaces

SiMP-Seal 25 HM

One-part SiMP high modulus construction sealant

• Environmentally friendly – Free of isocyanates and solvents
• No hazard symbol required
• No bubble formation - Odorless
• Bonds and seals at the same time
• Permanently elastic; accommodates joint movement of ±20%
• Easy to gun with excellent tooling consistency
• Exceptional thixotropy, non-sagging, short cut off string
• Excellent primerless adhesion on all typical construction and industrial materials
• Non-staining on concrete and porous materials
• Excellent resistance to ageing, weathering; color stable and non-yellowing
• Over-paintable with many water and solvent based paints (preliminary tests recommended)

S Bond W4

PM3 – Spray Gun

Pneumatic gun for sprayable sealants

U-SEAL 906 AS

One-part, hydrophilic swelling polyurethane adhesive and sealant

• Bonds and seals at the same time
• May be applied on damp surfaces
• Good thixotropy, non-sagging
• One-component, east and fast application
• Excellent primerless adhesion on concrete, plastic, metal and bentonitic stripes
• Swells in contact with water
• Expansion rate increasing over time up to 450%, without damage to uncured concrete
• Resistant to pressures up to 5 bar
• Returns to the original volume in absence of water
• Solvent free

SiMP-Seal 650

Multipurpose one-part SiMP elastic adhesive and sealant. Completely odorless and very low emissions

• SiMP Silyl-Modified Polymer
• Solvent and isocyanate free. No Hazard symbol required
• Emicode EC1 certified with very low emission, thanks to its specific formulation
• Completely odorless
• Excellent resistance to ageing and weathering
• Completely color stable
• White color as pure and non-yellowish
• Outstanding thixotropy, non-sagging, short cut-off string
• Permanently flexible over a wide range of temperatures
• No bubble formation
• Easy to gun with excellent tooling consistency
• Excellent primerless adhesion on all typical construction and industrial materials and substrates
• Neutral behavior, does not attack support surface
• Over-paintable with many water and solvent based paints (preliminary tests recommended)
• Short time resistant up to +180 °C for powder and thermal coating

SiMP Coat 25

One-part SiMP waterproofing base coat membrane. Breathable, provides water and air barrier and is free of bitumen, solvents and isocyanates

• One component, ready to use: cure starts from adhesion surface and external surface
• Environmentally friendly – free of bitumen, isocyanates and solvents: no smell.
• Environmentally friendly – free of bitumen, isocyanates and solvents: no smell.
• Does not dissolve in water after curing like water-based membranes
• Neutral curing, does not stain, corrode or affect sensible materials like metal, concrete etc.
• Liquid: easy to apply with professional or simple tools, like spatula, brush or roller
• Cold applied: in any situation and any climate
• Full surface adhesion and seamless covering, even on curved surfaces
• In combination with non-woven fabric is suitable to cover details, corners, edges
• Bonds and cures in humid weather and on damp substrates
• Short rain stability time: skin forms after 4 hours and self-protect from rain showers
• Short curing time for short-time application
• Same day application: does not need after- application finishing or reprise
• Provides water vapor permeability, allowing the surface to breathe
• Compatible with most building materials
• Easy to repair in case of damage
• Paintable

Eco Bond Flooring 4 in 1

One-part SiMP high-elastic strength wood-flooring adhesive

• SiMP Silyl-Modified Polymer
• Ready-to-use, no mixing required
• Solvent and isocyanate free, odorless
• Acting as a vapor barrier by providing very low vapor permeability
• Supplying sound insulation due to a reduced impact sound pressure level
• Having an anti-shock system that guarantees strength and adhesion under real working conditions
• Having very low VOC emissions certified by EMICODE EC1 PLUS
• No Hazard symbol required

SiMP-Seal 20

One-part SiMP low modulus construction sealant

• Environmentally friendly – Free of isocyanates and solvents
• No hazard symbol required
• No bubble formation - Odorless
• Bonds and seals at the same time
• Permanently elastic; accommodates joint movement of ±25%
• Easy to gun with excellent tooling consistency
• Exceptional thixotropy, non-sagging, short cut off string
• Excellent primerless adhesion on all typical construction and industrial materials
• Non-staining on concrete and porous materials
• Excellent resistance to ageing, weathering; color stable and non-yellowing
• Over-paintable with many water and solvent based paints (preliminary tests recommended)

Bitum Gasket

Black waterproofing adhesive-sealant for bitumen waterproofing and repair

• Bonds, seals, waterproofs
• Adheres on bitumen and wet surfaces
• Good adhesion to metal surfaces
• Can be applied on vertical surfaces; it does not sag

SiMP Fix Crystal

One-part SiMP crystal clear elastic adhesive and sealant

• Crystal clear
• Excellent resistance to ageing, weathering; color stable, non-yellowing and non-chalking
• Environmentally friendly – Free of isocyanates and solvents
• No hazard symbol required
• No bubble formation - Odorless
• Bonds and seals at the same time
• Permanently elastic
• Easy to gun with excellent tooling consistency
• Exceptional thixotropy, non-sagging, short cut off string
• No change in volume, no shrinkage
• Good primerless adhesion on all typical construction and industrial materials
• Non-staining on concrete and porous materials