Membrane
Water-proofing
Return to: Construction

SiMP Coat AR 100 X

One-part SiMP Aria Polymer waterproofing top coat membrane. Breathable, provides water and air barrier and is free of bitumen, solvent and isocyanates

SiMP Coat AR 100 X is a premium, liquid and cold applied, one-part, SiMP – Silyl Modified Polymer topcoat membrane. It cures by reaction with ambient moisture to form a strong protective and self-leveling base coat. SiMP Coat AR 100 X provides water vapor permeability, allowing the surface to breathe. Areas of application Traditional inclined roofs: shingles, tiles, stones. Industrial metal roofs curved or flexible surface metal and plastic roofs and coverings, flat concrete roofs and terraces. Protection from CO2 and life cycle extension of concrete structures according to EN 1062-6. Cost efficient life cycle extension of failing roofs in general from rust, degradation. Protection of polyurethane foam, insulation panels. Waterproofing of wet areas (under-tile) in bathrooms, kitchens, balconies, auxiliary rooms. Gutters and downspout repair, protection of masonry and vertical surfaces according to EN 1542, waterproofing in new or existing concrete floor slabs and roofs. Cool roof applications according to ASTM E1980-11 with high Solar Reflection Index - SRI Compliant to: LEED iEQc 4.1 ; SCAQMD Rule 1168; BAAQMD Reg 8 Rule 51 Certified according to: EN 1504-2:2005 ASTM E1980-11
  • One component, ready to use: cure starts from adhesion surface and external surface
  • Environmentally friendly – free of bitumen, isocyanates and solvents: no smell
  • SiMP aliphatic hybrid polymer: totally bubble-free in the surface and the body
  • Does not dissolve in water after curing like water-based membranes
  • Neutral curing, does not stain, corrode or affect sensible materials like metal, concrete etc.
  • Liquid: easy to apply with professional or simple tools, like spatula, brush or roller
  • Cold applied: in any situation and any climate
  • Full surface adhesion and seamless covering, even on curved surfaces
  • In combination with non-woven fabric is suitable to cover details, corners, edges
  • Bonds and cures in humid weather and on damp substrates
  • Short rain stability time: skin forms after 4 hours and self-protect from rain showers
  • Short curing time for short-time application
  • Same day application: does not need after- application finishing or reprise
  • Provides water vapor permeability, allowing the surface to breathe
  • Compatible with most building materials
  • Easy to repair in case of damage
  • Paintable

You might be interested in



  • SiMP-Seal 25 HM
    One-part SiMP high modulus construction sealant

    • Environmentally friendly – Free of isocyanates and solvents
    • No hazard symbol required
    • No bubble formation - Odorless
    • Bonds and seals at the same time
    • Permanently elastic; accommodates joint movement of ±20%
    • Easy to gun with excellent tooling consistency
    • Exceptional thixotropy, non-sagging, short cut off string
    • Excellent primerless adhesion on all typical construction and industrial materials
    • Non-staining on concrete and porous materials
    • Excellent resistance to ageing, weathering; color stable and non-yellowing
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
  • Placeholder

    S Bond W4


  • SiMP Coat 25
    One-part SiMP waterproofing base coat membrane. Breathable, provides water and air barrier and is free of bitumen, solvents and isocyanates

    • One component, ready to use: cure starts from adhesion surface and external surface
    • Environmentally friendly – free of bitumen, isocyanates and solvents: no smell.
    • Environmentally friendly – free of bitumen, isocyanates and solvents: no smell.
    • Does not dissolve in water after curing like water-based membranes
    • Neutral curing, does not stain, corrode or affect sensible materials like metal, concrete etc.
    • Liquid: easy to apply with professional or simple tools, like spatula, brush or roller
    • Cold applied: in any situation and any climate
    • Full surface adhesion and seamless covering, even on curved surfaces
    • In combination with non-woven fabric is suitable to cover details, corners, edges
    • Bonds and cures in humid weather and on damp substrates
    • Short rain stability time: skin forms after 4 hours and self-protect from rain showers
    • Short curing time for short-time application
    • Same day application: does not need after- application finishing or reprise
    • Provides water vapor permeability, allowing the surface to breathe
    • Compatible with most building materials
    • Easy to repair in case of damage
    • Paintable

  • Silcoflex 590
    One-part neutral alkoxy-curing low modulus silicone sealant for indoor and outdoor applications

    • Rapid crosslinking, short skin time
    • Primerless adhesion to most materials
    • Non-corrosive to metals
    • Suitable for alkaline substrates such as concrete, mortar, fibrous cement
    • Adheres excellently to glass and metals
    • Contains fugicides, suitable for use in sanitary areas
    • Odourless
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures

  • Eco Bond Flooring 4 in 1
    One-part SiMP high-elastic strength wood-flooring adhesive

    • SiMP Silyl-Modified Polymer
    • Ready-to-use, no mixing required
    • Solvent and isocyanate free, odorless
    • Acting as a vapor barrier by providing very low vapor permeability
    • Supplying sound insulation due to a reduced impact sound pressure level
    • Having an anti-shock system that guarantees strength and adhesion under real working conditions
    • Having very low VOC emissions certified by EMICODE EC1 PLUS
    • No Hazard symbol required

  • Filgum
    Fiber-reinforced waterproofing elastic coating

    • For terraces, gutters, cracks.
    • All seasons: even in wet and cold (-15 °C) climate
    • Resists crack movements and temperature fluctuations

  • Bitum Gasket
    Black waterproofing adhesive-sealant for bitumen waterproofing and repair

    • Bonds, seals, waterproofs
    • Adheres on bitumen and wet surfaces
    • Good adhesion to metal surfaces
    • Can be applied on vertical surfaces; it does not sag

  • U-Seal 816
    One-part polyurethane self-levelling sealant NPT bubble-free curing LC-Technology

    • One part - no mixing on site. Self-levelling consistency
    • Bubble-free curing
    • Non staining
    • Resistant to hydrocarbons, oils and fuels. Bitumen-free
    • Primerless adhesion on concrete
    • Permanently elastic; accommodates joint movement of ±25%
    • Good resistance to ageing, weathering and cleansing agents, sea water, lime water

  • SiMP-Seal 650
    Multipurpose one-part SiMP elastic adhesive and sealant. Completely odorless and very low emissions

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free. No Hazard symbol required
    • Emicode EC1 certified with very low emission, thanks to its specific formulation
    • Completely odorless
    • Excellent resistance to ageing and weathering
    • Completely color stable
    • White color as pure and non-yellowish
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Neutral behavior, does not attack support surface
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
    • Short time resistant up to +180 °C for powder and thermal coating
  • One-part polyurethane low modulus construction sealant, U-SEAL 907

    U-Seal 907
    One-part polyurethane low modulus construction sealant

    • Bonds and seals at the same time
    • Permanently elastic; accommodates joint movement of ±50%
    • Easy to gun with excellent tooling consistency
    • Good thixotropy, non-sagging
    • Excellent primerless adhesion on all typical construction and industrial materials
    • Non-staining on concrete and porous materials
    • Good resistance to ageing, weathering and cleansing agents, sea water, lime water
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)

  • Silcoflex 595
    One-part, neutral oxime-curing, silicone sealant for indoor and outdoor applications

    • Rapid crosslinking, short skin time
    • Primerless adhesion to most materials
    • Non-corrosive to metals
    • Suitable for alkaline substrates such as concrete, mortar, fibrous cement
    • Adheres excellently to glass and metals
    • Contains fungicides, suitable for use in sanitary areas
    • Odourless
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures

  • U-SEAL 906 AS
    One-part, hydrophilic swelling polyurethane adhesive and sealant

    • Bonds and seals at the same time
    • May be applied on damp surfaces
    • Good thixotropy, non-sagging
    • One-component, east and fast application
    • Excellent primerless adhesion on concrete, plastic, metal and bentonitic stripes
    • Swells in contact with water
    • Expansion rate increasing over time up to 450%, without damage to uncured concrete
    • Resistant to pressures up to 5 bar
    • Returns to the original volume in absence of water
    • Solvent free

  • U-Seal 500
    One-part polyurethane multipurpose adhesive sealant

    • Bonds and seals at the same time
    • Permanently elastic; accommodates joint movement of ±25%
    • Easy to gun with excellent tooling consistency
    • Good thixotropy, non-sagging
    • Shock and impact resistance
    • Vibration and sound dampening properties
    • Excellent primerless adhesion on all typical construction and industrial materials
    • Elastic bonding between metal, plastic, glass and other materials
    • Non-staining. Neutral behavior, does not attack support surface
    • Good resistance to ageing, weathering and cleansing agents, sea water, lime water
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
  • SIMP-SEAL 20, One-part SiMP low modulus construction sealant

    SiMP-Seal 20
    One-part SiMP low modulus construction sealant

    • Environmentally friendly – Free of isocyanates and solvents
    • No hazard symbol required
    • No bubble formation - Odorless
    • Bonds and seals at the same time
    • Permanently elastic; accommodates joint movement of ±25%
    • Easy to gun with excellent tooling consistency
    • Exceptional thixotropy, non-sagging, short cut off string
    • Excellent primerless adhesion on all typical construction and industrial materials
    • Non-staining on concrete and porous materials
    • Excellent resistance to ageing, weathering; color stable and non-yellowing
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)

  • PM3 – Spray Gun
    Pneumatic gun for sprayable sealants


  • U-Coat 850
    LC-Technology - Liquid-applied polyurethane waterproofing membrane

    • Waterproofing of wet areas (under-tile) in bathrooms, kitchens, balconies, auxiliary rooms, etc
    • Waterproofing in new or existing concrete floor slabs and roofs
    • Liquid: easy to apply with professional or simple tools, like brush or roller
    • Full surface adhesion and seamless covering, even on curved surfaces

  • SiMP Fix Crystal
    One-part SiMP crystal clear elastic adhesive and sealant

    • Crystal clear
    • Excellent resistance to ageing, weathering; color stable, non-yellowing and non-chalking
    • Environmentally friendly – Free of isocyanates and solvents
    • No hazard symbol required
    • No bubble formation - Odorless
    • Bonds and seals at the same time
    • Permanently elastic
    • Easy to gun with excellent tooling consistency
    • Exceptional thixotropy, non-sagging, short cut off string
    • No change in volume, no shrinkage
    • Good primerless adhesion on all typical construction and industrial materials
    • Non-staining on concrete and porous materials
  • Placeholder

    SiMP Ultra Tack
    Ultra-high grab and extreme green strength one-part, SiMP elastic assembly adhesive

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free, odourless
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Extreme green strength: Ultra high grab and load bearing capacity
    • High mechanical and dynamic stress resistance
    • Shock and impact resistance
    • Vibration and sound damping properties
    • Increases torsion stiffness in final assembly
    • Very good flow already from +5°C; maximum grab still at +35°C
    • No bubble formation
    • Excellent primerless adhesion on all typical industrial materials and substrates
    • Non-staining. Neutral behavior, does not attack support surface
    • No Hazard symbol required. Odorless
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)

  • CSG 210 Gun
    Pneumatic gun for cartridges


  • SiMP 2K Fast

    • Fast strength build-up, handling strength achieved after 60 minutes
    • Simple processing
    • Does not sag or run
    • Very wide primerless adhesion range
    • Suitable for general purpose bonding
    • Neutral behaviour, does not attack support surfaces
    • High mechanical and dynamic stress resistance
    • Impact and vibration resistant (shock absorbing)
    • Spot weldable before curing
    • May be sanded and overpainted
    • Solvent free, odourless