Adhesives
Wood-flooring
Return to: Construction

Eco Bond Flooring 4 in 1

One-part SiMP high-elastic strength wood-flooring adhesive

Eco Bond Flooring 4 in 1 is a ready-to-use, one-component, high-elastic strength wood-flooring SiMP – Silyl Modified Polymer adhesive. Eco Bond Flooring 4 in 1 delivers the following performances: 

  1. Acting as a vapor barrier by providing very low vapor permeability
  2. Supplying sound insulation due to a reduced impact sound pressure level
  3. Having an anti-shock system that guarantees strength and adhesion under real working conditions
  4. Having very low VOC emissions certified by EMICODE EC1 PLUS


Areas of Application 
Eco Bond Flooring 4 in 1 is suitable for full surface bonding of multilayer engineered pre-finished parquet or solid wood floors with or without tongue and groove as well as chipboards to cement screeds, fast setting screeds, anhydrite screeds, or on pre-existent wood, ceramic tile, and marble flooring. It is preferable the use of stable woods. It is also suitable in combination with under-floor heating systems. The adhesive is suitable for all species according to UNI EN 13556. 

Certified according to:  
VOC Emission EMICODE EC1 PLUS 

Compliant to: 
EN 14293 Adhesives for bonding parquet subfloor 
LEED iEQc 4.1 ; SCAQMD Rule 1168 ; BAAQMD Reg 8 Rule 51 
CARB VOC levels regulation 
ISO 16283 – Acoustic sound reduction 
  • SiMP Silyl-Modified Polymer
  • Ready-to-use, no mixing required
  • Solvent and isocyanate free, odorless
  • Easy to spread and trowel by spatula with excellent ridge holding consistency
  • Rapid grab and high filling capacity
  • Suitable for subfloor heating
  • Easy to remove from hands and from parquet surface
  • No Hazard symbol required

There aren't downloads

There aren't other information

You might be interested in



  • CSG 210 Gun
    Pneumatic gun for cartridges

  • Placeholder

    SiMP Ultra Tack
    Ultra-high grab and extreme green strength one-part, SiMP elastic assembly adhesive

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free, odourless
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Extreme green strength: Ultra high grab and load bearing capacity
    • High mechanical and dynamic stress resistance
    • Shock and impact resistance
    • Vibration and sound damping properties
    • Increases torsion stiffness in final assembly
    • Very good flow already from +5°C; maximum grab still at +35°C
    • No bubble formation
    • Excellent primerless adhesion on all typical industrial materials and substrates
    • Non-staining. Neutral behavior, does not attack support surface
    • No Hazard symbol required. Odorless
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
  • primer

    U-Primer 150
    One-component polyurethane primer.


  • Silcoflex 595
    One-part, neutral oxime-curing, silicone sealant for indoor and outdoor applications

    • Rapid crosslinking, short skin time
    • Primerless adhesion to most materials
    • Non-corrosive to metals
    • Suitable for alkaline substrates such as concrete, mortar, fibrous cement
    • Adheres excellently to glass and metals
    • Contains fungicides, suitable for use in sanitary areas
    • Odourless
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures
  • Placeholder

    SiMP 2K Fast

    • Privo di solventi ed isocianati
    • Tempo aperto 4 min a 23°C - 50%UR
    • Tempo di presa 30 min
    • Perfettamente flessibile
    • Sovraverniciabile con vernici a base solvente e a base acqua
  • construction adhesive, wood floor adhesive, polyurethane adhesiv U-BOND X-TREME

    U-Bond X-treme
    One part solvent-free high-shear strength adhesive.

    • One-part adhesive, solvent -free
    • Ready-to-use, no mixing required
    • Firmly bonds any wood essence types to screed
    • Multi-functional: bonds-consolidates-water-proofs
    • Installation on screeds with up to 5% humidity
  • Placeholder

    SiMP-Seal 650
    Multipurpose one-part SiMP elastic adhesive and sealant. Completely odorless and very low emissions

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free. No Hazard symbol required
    • Emicode EC1 certified with very low emission, thanks to its specific formulation
    • Completely odorless
    • Excellent resistance to ageing and weathering
    • Completely color stable
    • White color as pure and non-yellowish
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Neutral behavior, does not attack support surface
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
    • Short time resistant up to +180 °C for powder and thermal coating
  • Placeholder

    SiMP-Seal 45 UV
    Highly UV and weather resistant one-part SiMP elastic adhesive and sealant

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free, odourless
    • Extremely high UV, ageing and weather resistance
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No change in volume – No shrinkage
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Non-staining. Neutral behavior, does not attack support surface
    • No Hazard symbol required
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
  • Placeholder

    SiMP Crystal
    One-part SiMP crystal clear elastic adhesive and sealant

    • Crystal clear
    • Excellent resistance to ageing, weathering; color stable, non-yellowing and non-chalking
    • Environmentally friendly – Free of isocyanates and solvents
    • No hazard symbol required
    • No bubble formation - Odorless
    • Bonds and seals at the same time 
    • Permanently elastic
    • Easy to gun with excellent tooling consistency
    • Exceptional thixotropy, non-sagging, short cut off string
    • No change in volume, no shrinkage
    • Good primerless adhesion on all typical construction and industrial materials
    • Non-staining on concrete and porous materials
  • construction adhesive, wood-flooring adhesive, , two component epoxy-polyurethane adhesive, 2K-Bond Contract

    2K-Bond Contract
    Two part epoxy-polyurethane adhesive.

    • One-part adhesive, solvent -free
    • Ready-to-use, no mixing required
    • Hard-elastic adhesive ridge (EN 14 293)
    • Firmly bonds all wood types to screed

  • PM3 – Spray Gun
    Pneumatic gun for sprayable sealants

  • U-BOND SPECIAL, polyurethane adhesive, costruction adhesive, wood flooring adhesive

    U-Bond Special
    One part solvent-free hard-elastic adhesive.

    • One-part adhesive, solvent -free
    • Ready-to-use, no mixing required
    • Hard-elastic adhesive ridge (EN 14 293)
    • Firmly bonds any wood essence to screed
  • One-part polyurethane paste adhesive

    U-Bond 305
    One-part polyurethane paste adhesive

    • One-component polyurethane
    • Cold applied, gun grade
    • Easy-to-use, non-sagging
    • Very low foaming with high filling capacity
    • Excellent adhesion on numerous substrates like insulating material, wood, plastic and metal
    • Solvent free Odorless
    • Weathering resistance according to DIN 204 D4
    • Resistant to ageing
    • Resistant to chemicals
  • One-part polyurethane fast curing paste adhesive

    U-Bond 307 FC
    One-part polyurethane fast curing paste adhesive

    • One-component polyurethane
    • Very fast setting
    • Cold applied, gun grade
    • Easy-to-use, non-sagging
    • Very low foaming with high filling capacity
    • Excellent adhesion on numerous substrates like insulating material, wood, plastic and metal
    • Solvent free – Odorless
    • Weathering resistance according to DIN 204 D4
    • Resistant to ageing
    • Resistant to chemicals
  • One-part polyurethane fast curing translucent paste adhesive

    U-Bond 309 TFC
    One-part polyurethane fast curing translucent paste adhesive

    • One-component polyurethane
    • Translucent, for invisible bonding line
    • Very fast setting
    • Cold applied, gun grade
    • Easy-to-use, non-sagging
    • Very low foaming with high filling capacity
    • Excellent adhesion on numerous substrates like insulating material, wood, plastic and metal
    • Solvent free - Odourless
    • Weathering resistance according to DIN 204 D4
    • Resistant to ageing
    • Resistant to chemicals
  • Placeholder

    S Bond W4

  • automotive adhesive, sealing and bonding in car body, U-SEAL 500

    U-Seal 500
    One-part polyurethane multipurpose adhesive sealant

    • Bonds and seals at the same time
    • Permanently elastic; accommodates joint movement of ±25%
    • Easy to gun with excellent tooling consistency
    • Good thixotropy, non-sagging
    • Shock and impact resistance
    • Vibration and sound dampening properties
    • Excellent primerless adhesion on all typical construction and industrial materials
    • Elastic bonding between metal, plastic, glass and other materials
    • Non-staining. Neutral behavior, does not attack support surface
    • Good resistance to ageing, weathering and cleansing agents, sea water, lime water
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
  • construction adhesive, wood-flooring adhesive, S-Bond Force,

    S-Bond Force
    One part solvent and isocyanate-free hard-elastic adhesive.

    • One-part adhesive, solvent and isocyanate -free
    • One-part adhesive, solvent and isocyanate -free
    • Ready-to-use, no mixing required
    • Hard-elastic adhesive ridge (EN 14 293) , firmly bonds all wood types to screed
    • Very high tensile strength
    • No staining of the prefinished surface in engineered wood plank

  • S-Bond Flex
    One part solvent and isocyanate-free elastic adhesive.

    • One-part adhesive, solvent- and isocyanate-free
    • Very low emission and odor-free (Emicode EC1 PLUS compliant)
    • Ready-to-use, no mixing required
    • No staining of the prefinished surface in engineered wood plank