U-Bond 305

SiMP Ultra Tack

Ultra-high grab and extreme green strength one-part, SiMP elastic assembly adhesive

• SiMP Silyl-Modified Polymer
• Solvent and isocyanate free, odourless
• Outstanding thixotropy, non-sagging, short cut-off string
• Extreme green strength: Ultra high grab and load bearing capacity
• High mechanical and dynamic stress resistance
• Shock and impact resistance
• Vibration and sound damping properties
• Increases torsion stiffness in final assembly
• Very good flow already from +5°C; maximum grab still at +35°C
• No bubble formation
• Excellent primerless adhesion on all typical industrial materials and substrates
• Non-staining. Neutral behavior, does not attack support surface
• No Hazard symbol required. Odorless
• Over-paintable with many water and solvent based paints (preliminary tests recommended)

Activator 440 W

Adhesion promoter for primerless direct glazing applications

• Float glass and ceramic coated (frit) glass
• Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
• Painted surfaces and coatings (epoxy and polyester painted sheet steel)
• Original PU or MS adhesives cut surface for replacement

U-Bond Ultra 2K – 1 & 5 min

Plastic repair two-parts polyurethane adhesive

• Odorless and solvent free
• Extremely quick full curing
• Spot weldable before curing
• Convenient as gap filler. May be sanded and overpainted

U-SEAL 906 AS

One-part, hydrophilic swelling polyurethane adhesive and sealant

• Bonds and seals at the same time
• May be applied on damp surfaces
• Good thixotropy, non-sagging
• One-component, east and fast application
• Excellent primerless adhesion on concrete, plastic, metal and bentonitic stripes
• Swells in contact with water
• Expansion rate increasing over time up to 450%, without damage to uncured concrete
• Resistant to pressures up to 5 bar
• Returns to the original volume in absence of water
• Solvent free

S-Bond Flex

One part solvent and isocyanate-free elastic adhesive.

• One-part adhesive, solvent- and isocyanate-free
• Very low emission and odor-free (Emicode EC1 PLUS compliant)
• Ready-to-use, no mixing required
• No staining of the prefinished surface in engineered wood plank

Silcoflex 595

One-part, neutral oxime-curing, silicone sealant for indoor and outdoor applications

• Rapid crosslinking, short skin time
• Primerless adhesion to most materials
• Non-corrosive to metals
• Suitable for alkaline substrates such as concrete, mortar, fibrous cement
• Adheres excellently to glass and metals
• Contains fungicides, suitable for use in sanitary areas
• Odourless
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) temperatures

SiMP-Seal 640

Multipurpose, wide spectrum adhesion one-part SiMP elastic adhesive and sealant

• SiMP Silyl-Modified Polymer
• Solvent and isocyanate free
• Excellent resistance to ageing and weathering; color stable and non-yellowing
• Outstanding thixotropy, non-sagging, short cut-off string
• Permanently flexible over a wide range of temperatures
• No bubble formation
• Easy to gun with excellent tooling consistency
• Excellent primerless adhesion on all typical construction and industrial materials and substrates
• Neutral behavior, does not attack support surface
• No Hazard symbol required
• Over-paintable with many water and solvent based paints (preliminary tests recommended)

SiMP Fix Crystal

One-part SiMP crystal clear elastic adhesive and sealant

• Crystal clear
• Excellent resistance to ageing, weathering; color stable, non-yellowing and non-chalking
• Environmentally friendly – Free of isocyanates and solvents
• No hazard symbol required
• No bubble formation - Odorless
• Bonds and seals at the same time
• Permanently elastic
• Easy to gun with excellent tooling consistency
• Exceptional thixotropy, non-sagging, short cut off string
• No change in volume, no shrinkage
• Good primerless adhesion on all typical construction and industrial materials
• Non-staining on concrete and porous materials

G+S Cleaner

Professional foam cleaning agent

• Active formula aggressive on contaminants
• Foaming action allow to identify contaminant areas
• Spray-on/wipe-off foam
• Does not run
• Fast dying and residue-free action
• Efficient as cutout lubricant
• Efficient as smoothing agent for beading, leaving no traces
• Efficient as dry cleaner for external body parts and internal upholstery and cockpit

Eco Bond Flooring 4 in 1

One-part SiMP high-elastic strength wood-flooring adhesive

• SiMP Silyl-Modified Polymer
• Ready-to-use, no mixing required
• Solvent and isocyanate free, odorless
• Acting as a vapor barrier by providing very low vapor permeability
• Supplying sound insulation due to a reduced impact sound pressure level
• Having an anti-shock system that guarantees strength and adhesion under real working conditions
• Having very low VOC emissions certified by EMICODE EC1 PLUS
• No Hazard symbol required

SiMP-Seal 55

Multipurpose, wide spectrum adhesion one-part SiMP elastic adhesive and sealant

• SiMP Silyl-Modified Polymer
• Solvent and isocyanate free
• Good ageing and weather resistance
• Outstanding thixotropy, non-sagging, short cut-off string
• Permanently flexible over a wide range of temperatures
• No bubble formation
• Easy to gun with excellent tooling consistency
• Excellent primerless adhesion on all typical construction and industrial materials and substrates
• Neutral behavior, does not attack support surface
• No Hazard symbol required
• Over-paintable with many water and solvent based paints (preliminary tests recommended)

Cleaner E

Professional industrial cleaner and remover

U-Primer 150

One-component polyurethane primer.

SiMP-Seal Teak 680

Watertight, saltwater and UV resistant one-part SiMP teak decks sealant

• SiMP Silyl-Modified Polymer
• Solvent and isocyanate free. Odorless
• Good ageing and weather resistance
• No bubble formation
• Easy to gun with excellent tooling consistency
• No Hazard symbol required
• Excellent weathering resistance - extremely good color stability and UV resistance
• Long term resistance against fresh and salt water
• No gas reaction – Bubbles free, no bulging and shrinking
• Permanently flexible in a temperature range of -40°C to +100°C
• Can be sanded after curing

U-Seal 550FC

High thixotropy, fast curing one-part polyurethane elastic adhesive and sealant, which is PVC-free and odorless

• One-component polyurethane
• Cold applied
• Wide spectrum of adhesion
• Non-sag, exceptional thixotropy and short cut-off string
• Bonds and seals at the same time
• Very fast curing through volume
• Over-paintable, even in a short time, with many water and solvent based paints (preliminary tests recommended)
• Can be easily tooled, brushed and smoothed
• Capable of withstanding high dynamic stresses
• Permanently flexible
• Vibration and sound dampening properties

SiMP 2K Fast

• Fast strength build-up, handling strength achieved after 60 minutes
• Simple processing
• Does not sag or run
• Very wide primerless adhesion range
• Suitable for general purpose bonding
• Neutral behaviour, does not attack support surfaces
• High mechanical and dynamic stress resistance
• Impact and vibration resistant (shock absorbing)
• Spot weldable before curing
• May be sanded and overpainted
• Solvent free, odourless

Activator 400 NP

Adhesion promoter for non-porous substrates

• Plastics, fiberglass and other synthetic non-porous materials
• Painted surfaces and coatings (epoxy and polyester painted sheet steel)
• Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
• Float glass and ceramic coated (frit) glass

S Bond W4

SiMP ADVANCED 70 UP

Ultimate mechanical strength, primerless to glass one-part SiMP-Advanced elastic adhesive

• SiMP-Advanced: ultimate mechanical performancesSilyl-Modified Polymer
• Solvent and isocyanate free, odorless
• Outstanding thixotropy, non-sagging, short cut-off string
• High green strength: instant grab and load bearing capacity
• High mechanical and dynamic stress resistance
• Shock and impact resistance
• Vibration and sound damping properties
• Increase torsional stiffness of final assembly
• Excellent primerless adhesion on all typical industrial materials and substrates
• Non-staining. Neutral behavior, does not attack support surface
• No Hazard symbol required
• Permanently flexible over a wide range of temperatures
• Over-paintable with many water and solvent based paints (preliminary tests recommended)
• No bubble formation

U-Bond 307 FC

One-part polyurethane fast curing paste adhesive

• One-component polyurethane
• Very fast setting
• Cold applied, gun grade
• Easy-to-use, non-sagging
• Very low foaming with high filling capacity
• Excellent adhesion on numerous substrates like insulating material, wood, plastic and metal
• Solvent free – Odorless
• Weathering resistance according to DIN 204 D4
• Resistant to ageing
• Resistant to chemicals

SiMP 2K 50LV

Two-parts SiMP low viscosity flexible adhesive

• Environmentally friendly, free of isocyanates and solvents, no Hazard symbol
• No bubble formation - Odorless
• Reticulation through volume even between non-porous materials and at low temperatures
• Permanently flexible over a wide range of temperatures
• No change in volume - No shrinkage
• Low viscosity - easy to apply with spray, towel or roller
• Non-sag in vertical application, fast grab effect
• Excellent primerless adhesion on all typical construction and industrial materials
• Fast strength build-up
• Neutral behavior, does not attack support surfaces
• Impact and vibration resistance (shock absorbing)
• Spot weldable before curing

SiMP-Seal 650

Multipurpose one-part SiMP elastic adhesive and sealant. Completely odorless and very low emissions

• SiMP Silyl-Modified Polymer
• Solvent and isocyanate free. No Hazard symbol required
• Emicode EC1 certified with very low emission, thanks to its specific formulation
• Completely odorless
• Excellent resistance to ageing and weathering
• Completely color stable
• White color as pure and non-yellowish
• Outstanding thixotropy, non-sagging, short cut-off string
• Permanently flexible over a wide range of temperatures
• No bubble formation
• Easy to gun with excellent tooling consistency
• Excellent primerless adhesion on all typical construction and industrial materials and substrates
• Neutral behavior, does not attack support surface
• Over-paintable with many water and solvent based paints (preliminary tests recommended)
• Short time resistant up to +180 °C for powder and thermal coating

CSG 210 Gun

Pneumatic gun for cartridges

U-Bond Ultra 2K Assembly

Structural assembly two-parts polyurethane adhesive

• Odorless and solvent free
• Extremely quick grip and curing
• Spot weldable before curing
• May be sanded or overpainted

Glass Wipe Cleaner

Single use cleaner and remover wipe

S-Bond Deck

One-part SiMP boat deck adhesive

• SiMP Silyl-Modified Polymer
• Ready-to-use, no mixing required
• Solvent and isocyanate free, odorless
• Very low emission according to EMICODE EC1 PLUS
• Fast curing with possibility to be combined to a booster
• No bulging or bubbling effect
• Easy to spread and trowel by spatula
• Easy to remove from hands and from parquet surface
• No Hazard symbol required
• Long term resistance to fresh water, sea water, diluted aqueous cleansing agents

U-Seal 500

One-part polyurethane multipurpose adhesive sealant

• Bonds and seals at the same time
• Permanently elastic; accommodates joint movement of ±25%
• Easy to gun with excellent tooling consistency
• Good thixotropy, non-sagging
• Shock and impact resistance
• Vibration and sound dampening properties
• Excellent primerless adhesion on all typical construction and industrial materials
• Elastic bonding between metal, plastic, glass and other materials
• Non-staining. Neutral behavior, does not attack support surface
• Good resistance to ageing, weathering and cleansing agents, sea water, lime water
• Over-paintable with many water and solvent based paints (preliminary tests recommended)

U-Bond 301

One-part liquid polyurethane adhesive for wood and panel bonding

• Easy-to-use. Pourable from twist-cap bottle to automatic dispensing industrial equipment
• Controlled foaming grade with good filling capacity
• Panel lamination and assembly
• Outdoor applications for woodworking
• Structural Bonding of construction materials

U-Bond 309 TFC

One-part polyurethane fast curing translucent paste adhesive

• One-component polyurethane
• Translucent, for invisible bonding line
• Very fast setting
• Cold applied, gun grade
• Easy-to-use, non-sagging
• Very low foaming with high filling capacity
• Excellent adhesion on numerous substrates like insulating material, wood, plastic and metal
• Solvent free - Odourless
• Weathering resistance according to DIN 204 D4
• Resistant to ageing
• Resistant to chemicals

S-Bond Force

One part solvent and isocyanate-free hard-elastic adhesive.

• One-part adhesive, solvent and isocyanate -free
• One-part adhesive, solvent and isocyanate -free
• Ready-to-use, no mixing required
• Hard-elastic adhesive ridge (EN 14 293) , firmly bonds all wood types to screed
• Very high tensile strength
• No staining of the prefinished surface in engineered wood plank

PM3 – Spray Gun

Pneumatic gun for sprayable sealants

2K-Bond Contract

Two part epoxy-polyurethane adhesive.

• One-part adhesive, solvent -free
• Ready-to-use, no mixing required
• Hard-elastic adhesive ridge (EN 14 293)
• Firmly bonds all wood types to screed

Brushable Seam Sealant

Car body repair one-part brushable seam sealant

• Cold applied
• Over-paintable, with many water and solvent based paints (preliminary tests recommended)
• Can be easily tooled, brushed and smoothed
• Corrosion protective

Activator 420 GL

Adhesion promoter for glass and non-porous substrates

• Float glass and ceramic coated (frit) glass
• Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
• Painted surfaces and coatings (epoxy and polyester painted sheet steel)
• Original PU or MS adhesives cut surface for replacement
• Plastics

U-Bond Special X-treme

One-part polyurethane hard-elastic wood-flooring adhesive

• Ready-to-use, no mixing required
• Very low emission
• Hard-elastic adhesive, firmly bonds all wood types to screed
• Easy to spread and trowel by spatula with excellent ridge holding consistency
• Fast grab
• Suitable for subfloor heating