Marine
Marine Assembly
Return to: Industry

S-Bond Deck

One-part SiMP boat deck adhesive

S-Bond Deck is a ready-to-use, one-component, boat deck SiMP – Silyl Modified Polymer adhesive. Specifically formulated for bonding teak slats to marine plywood, fiberglass reinforced plastic, wood, aluminum and steel. It offers an effective long-term resistance to fresh water, sea water, diluted aqueous cleansing agents. The product does not contain isocyanates, is solvent- and water-free, do not shrink during the curing phase and provides a permanent bond between large substrates. Areas of Application S-Bond Deck is specific for bonding marine decks to supporting structures. Particularly formulated for bonding of teak slats to marine plywood, fiber glass reinforced plastic, wood, aluminum and steel. Certified according to: VOC Emission EMICODE EC1 PLUS Compliant to: LEED iEQc 4.1 ; SCAQMD Rule 1168 ; BAAQMD Reg 8 Rule 51 CARB VOC levels regulation
  • SiMP Silyl-Modified Polymer
  • Ready-to-use, no mixing required
  • Solvent and isocyanate free, odorless
  • Very low emission according to EMICODE EC1 PLUS
  • Fast curing with possibility to be combined to a booster
  • No bulging or bubbling effect
  • Easy to spread and trowel by spatula
  • Easy to remove from hands and from parquet surface
  • No Hazard symbol required
  • Long term resistance to fresh water, sea water, diluted aqueous cleansing agents

You might be interested in



  • Activator 440 W
    Adhesion promoter for primerless direct glazing applications

    • Float glass and ceramic coated (frit) glass
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Original PU or MS adhesives cut surface for replacement

  • SiMP-Seal Teak 680
    Watertight, saltwater and UV resistant one-part SiMP teak decks sealant

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free. Odorless
    • Good ageing and weather resistance
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • No Hazard symbol required
    • Excellent weathering resistance - extremely good color stability and UV resistance
    • Long term resistance against fresh and salt water
    • No gas reaction – Bubbles free, no bulging and shrinking
    • Permanently flexible in a temperature range of -40°C to +100°C
    • Can be sanded after curing

  • Activator 420 GL
    Adhesion promoter for glass and non-porous substrates

    • Float glass and ceramic coated (frit) glass
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Original PU or MS adhesives cut surface for replacement
    • Plastics

  • U-Seal 550FC
    High thixotropy, fast curing one-part polyurethane elastic adhesive and sealant, which is PVC-free and odorless

    • One-component polyurethane
    • Cold applied
    • Wide spectrum of adhesion
    • Non-sag, exceptional thixotropy and short cut-off string
    • Bonds and seals at the same time
    • Very fast curing through volume
    • Over-paintable, even in a short time, with many water and solvent based paints (preliminary tests recommended)
    • Can be easily tooled, brushed and smoothed
    • Capable of withstanding high dynamic stresses
    • Permanently flexible
    • Vibration and sound dampening properties

  • SiMP ADVANCED 70 UP
    Ultimate mechanical strength, primerless to glass one-part SiMP-Advanced elastic adhesive

    • SiMP-Advanced: ultimate mechanical performancesSilyl-Modified Polymer
    • Solvent and isocyanate free, odorless
    • Outstanding thixotropy, non-sagging, short cut-off string
    • High green strength: instant grab and load bearing capacity
    • High mechanical and dynamic stress resistance
    • Shock and impact resistance
    • Vibration and sound damping properties
    • Increase torsional stiffness of final assembly
    • Excellent primerless adhesion on all typical industrial materials and substrates
    • Non-staining. Neutral behavior, does not attack support surface
    • No Hazard symbol required
    • Permanently flexible over a wide range of temperatures
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
    • No bubble formation

  • SiMP-Seal 640
    Multipurpose, wide spectrum adhesion one-part SiMP elastic adhesive and sealant

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free
    • Excellent resistance to ageing and weathering; color stable and non-yellowing
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Neutral behavior, does not attack support surface
    • No Hazard symbol required
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)

  • Cleaner E
    Professional industrial cleaner and remover

  • automotive industry adhesive, U-BOND ULTRA 2K 5MIN 50ML

    U-Bond Ultra 2K – 1 & 5 min
    Plastic repair two-parts polyurethane adhesive

    • Odorless and solvent free
    • Extremely quick full curing
    • Spot weldable before curing
    • Convenient as gap filler. May be sanded and overpainted

  • SiMP-Seal 650
    Multipurpose one-part SiMP elastic adhesive and sealant. Completely odorless and very low emissions

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free. No Hazard symbol required
    • Emicode EC1 certified with very low emission, thanks to its specific formulation
    • Completely odorless
    • Excellent resistance to ageing and weathering
    • Completely color stable
    • White color as pure and non-yellowish
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Neutral behavior, does not attack support surface
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
    • Short time resistant up to +180 °C for powder and thermal coating

  • G+S Cleaner
    Professional foam cleaning agent

    • Active formula aggressive on contaminants
    • Foaming action allow to identify contaminant areas
    • Spray-on/wipe-off foam
    • Does not run
    • Fast dying and residue-free action
    • Efficient as cutout lubricant
    • Efficient as smoothing agent for beading, leaving no traces
    • Efficient as dry cleaner for external body parts and internal upholstery and cockpit
  • Placeholder

    Brushable Seam Sealant
    Car body repair one-part brushable seam sealant

    • Cold applied
    • Over-paintable, with many water and solvent based paints (preliminary tests recommended)
    • Can be easily tooled, brushed and smoothed
    • Corrosion protective

  • U-Bond Ultra 2K Assembly
    Structural assembly two-parts polyurethane adhesive

    • Odorless and solvent free
    • Extremely quick grip and curing
    • Spot weldable before curing
    • May be sanded or overpainted

  • Glass Wipe Cleaner
    Single use cleaner and remover wipe


  • Activator 400 NP
    Adhesion promoter for non-porous substrates

    • Plastics, fiberglass and other synthetic non-porous materials
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Float glass and ceramic coated (frit) glass