Return to: Industry

Liquido Vetri Antigelo -33

Concentrated antifreeze for windscreen reservoirs
Detergent that is inserted into the windscreen wiper fluid reservoirs. It prevents freezing inside of said reservoirs and the washing circuit allowing a regular flow of liquid. Pure, it guarantees -33 °C; otherwise it can be diluted depending on the effectiveness to be obtained following the indications on the table on the label.
  • Strong detergent action
  • Antifreeze action up to -33 °C
  • Inhibits lime formation in nozzles
  • Does not leave streaks

There aren't downloads

There aren't other information

You might be interested in

  • Glass Wipe Cleaner
    Single use cleaner and remover wipe
  • automotive industry adhesive, U-BOND ULTRA 2K 5MIN 50ML
    U-Bond Ultra 2K – 1 & 5 min
    Plastic repair two-parts polyurethane adhesive
    • Odorless and solvent free
    • Extremely quick full curing
    • Spot weldable before curing
    • Convenient as gap filler. May be sanded and overpainted
  • U-Bond Ultra 2K Assembly
    Structural assembly two-parts polyurethane adhesive
    • Odorless and solvent free
    • Extremely quick grip and curing
    • Spot weldable before curing
    • May be sanded or overpainted
  • G+S Cleaner
    Professional foam cleaning agent
    • Active formula aggressive on contaminants
    • Foaming action allow to identify contaminant areas
    • Spray-on/wipe-off foam
    • Does not run
    • Fast dying and residue-free action
    • Efficient as cutout lubricant
    • Efficient as smoothing agent for beading, leaving no traces
    • Efficient as dry cleaner for external body parts and internal upholstery and cockpit
  • Placeholder
    Brushable Seam Sealant
    Car body repair one-part brushable seam sealant
    • Cold applied
    • Over-paintable, with many water and solvent based paints (preliminary tests recommended)
    • Can be easily tooled, brushed and smoothed
    • Corrosion protective
  • Activator 400 NP
    Adhesion promoter for non-porous substrates
    • Plastics, fiberglass and other synthetic non-porous materials
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Float glass and ceramic coated (frit) glass
  • SiMP ADVANCED 70 UP
    Ultimate mechanical strength, primerless to glass one-part SiMP-Advanced elastic adhesive
    • SiMP-Advanced: ultimate mechanical performancesSilyl-Modified Polymer
    • Solvent and isocyanate free, odorless
    • Outstanding thixotropy, non-sagging, short cut-off string
    • High green strength: instant grab and load bearing capacity
    • High mechanical and dynamic stress resistance
    • Shock and impact resistance
    • Vibration and sound damping properties
    • Increase torsional stiffness of final assembly
    • Excellent primerless adhesion on all typical industrial materials and substrates
    • Non-staining. Neutral behavior, does not attack support surface
    • No Hazard symbol required
    • Permanently flexible over a wide range of temperatures
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
    • No bubble formation
  • Activator 440 W
    Adhesion promoter for primerless direct glazing applications
    • Float glass and ceramic coated (frit) glass
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Original PU or MS adhesives cut surface for replacement
  • Activator 420 GL
    Adhesion promoter for glass and non-porous substrates
    • Float glass and ceramic coated (frit) glass
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Original PU or MS adhesives cut surface for replacement
    • Plastics
  • Cleaner E
    Professional industrial cleaner and remover