U-Bond Ultra 2K – 1 & 5 min

Plastic repair two-parts polyurethane adhesive

• Odorless and solvent free
• Extremely quick full curing
• Spot weldable before curing
• Convenient as gap filler. May be sanded and overpainted

U-Bond Ultra 2K – 45 sec

Plastic repair two-parts polyurethane adhesive

• Extremely quick full curing
• Spot weldable before curing
• Convenient as gap filler. May be sanded and overpainted

SiMP HIGH TACK

High grab and green strength one-part, SiMP elastic assembly adhesive

• SiMP Silyl-Modified Polymer
• Solvent and isocyanate free, odourless
• Outstanding thixotropy, non-sagging, short cut-off string
• High green strength: High grab and load bearing capacity
• High mechanical and dynamic stress resistance
• Shock and impact resistance
• Vibration and sound damping properties
• Increase torsional stiffness of final assembly
• No bubble formation
• Excellent primerless adhesion on all typical industrial materials and substrates
• Non-staining. Neutral behavior, does not attack support surface
• No Hazard symbol required. Odorless
• Over-paintable with many water and solvent based paints (preliminary tests recommended)

U-Bond 301

One-part liquid polyurethane adhesive for wood and panel bonding

• Easy-to-use. Pourable from twist-cap bottle to automatic dispensing industrial equipment
• Controlled foaming grade with good filling capacity
• Panel lamination and assembly
• Outdoor applications for woodworking
• Structural Bonding of construction materials

S-Bond Max 2K

High transparency, fast curing, thixotropic two-parts cyanoacrylate structural adhesive

• No halo formation, highly transparent
• Filling capacity and thickness bonding up to 6 mm
• Resistant to petrol and diesel
• May be sanded after complete polymerization

SiMP 2K 50LV

Two-parts SiMP low viscosity flexible adhesive

• Environmentally friendly, free of isocyanates and solvents, no Hazard symbol
• No bubble formation - Odorless
• Reticulation through volume even between non-porous materials and at low temperatures
• Permanently flexible over a wide range of temperatures
• No change in volume - No shrinkage
• Low viscosity - easy to apply with spray, towel or roller
• Non-sag in vertical application, fast grab effect
• Excellent primerless adhesion on all typical construction and industrial materials
• Fast strength build-up
• Neutral behavior, does not attack support surfaces
• Impact and vibration resistance (shock absorbing)
• Spot weldable before curing

Felt Applicator

Butaflex 200

Elastoplastic butyl sealant

• Excellent adhesion to metals and plastics
• Good ageing resistance
• Remains elastoplastic

Forza 10 Sil

One-part, acetoxy-curing, premium fungicide silicone sealant. Highly mold-resistant for superior bathroom hygiene

• 100% Silicone, free from solvents
• Rapid crosslinking, short skin time
• Adheres excellently to glass, vitrified surfaces and ceramic tiles
• Dedicated to sanitary areas
• 10 years proven protection against mold and discolouration
• Resists to mold and bacteria
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) temperatures

Silcoflex 590

One-part neutral alkoxy-curing low modulus silicone sealant for indoor and outdoor applications

• Rapid crosslinking, short skin time
• Primerless adhesion to most materials
• Non-corrosive to metals
• Suitable for alkaline substrates such as concrete, mortar, fibrous cement
• Adheres excellently to glass and metals
• Contains fugicides, suitable for use in sanitary areas
• Odourless
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) temperatures

Silcoflex 599

One-part, neutral alkoxy-curing, low modulus silicone sealant for facade and glazing applications

• Rapid crosslinking, short skin time
• Primerless adhesion to most materials
• Solvent-free, with limited volume shrinkage during vulcanization
• Non-corrosive to metals
• Excellent tooling characteristics for professional use
• Suitable for alkaline substrates such as concrete, mortar, fibrous cement
• Matt finish, odourless
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) temperatures

Silcoflex 450

One-part, acetoxy-curing, universal silicone sealant. Mold-resistant.

• Rapid crosslinking, short skin time
• Adheres excellently to glass and vitrified surfaces
• Suitable for sanitary areas
• Resistant to molds and bacteria
• Non-sagging
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) tempreatures

Silcoflex 470

One-part, acetoxy-curing, universal silicone sealant. Mold-resistant.

• Rapid crosslinking, short skin time
• Adheres excellently to glass and vitrified surfaces, plastics and most coatings
• Suitable for sanitary areas
• Resistant to molds and bacteria
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) temperatures

Silcoflex 583

One-part, acetoxy-curing, high temperature resistant silicone sealant, black

• Free from solvents
• Rapid crosslinking, short skin time
• Adheres excellently to glass and metals
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+250°C) temperatures

Silcoflex 587

One-component silicone sealant with acetic cross-linking, high temperatures resistant

• Free from solvents
• Rapid crosslinking, short skin time
• Adheres excellently to glass and metals
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+250°C) temperatures

Silcoflex 585

One-part, acetoxy-curing, low modulus silicone sealant. Mold-resistant sanitary sealant

• 100% Silicone, free from solvents
• Rapid crosslinking, short skin time
• Adheres excellently to glass, vitrified surfaces and ceramic tiles
• Dedicated to sanitary areas
• Resists to molds and bacteria
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) temperatures