-
U-Seal 201 Fast
Fast curing one-part polyurethane direct glazing & structural bonding adhesive
- One-component polyurethane
- Solvent free, odorless
- Fast curing
- Suitable for cold and warm application
- Outstanding thixotropy, high decking, non-sagging
- High viscosity, high green strength
- High Modulus - maintains torsional rigidity and increases the vehicles NVH values
- Capable of withstanding high dynamic stresses
- Suitable for use with integral aerials
-
U-Seal 208 BTR
Ultra-high viscosity for Bus, Truck & Rail industry one-part polyurethane direct glazing & structural bonding adhesive
- One-component polyurethane
- Solvent free, odorless
- Fast curing. Short cut-off string
- Suitable for cold and warm application
- Outstanding thixotropy, high decking, non-sagging
- High viscosity – high initial tack
- High Modulus - maintains torsional rigidity and increases the vehicles NVH values
- Capable of withstanding high dynamic stresses
- High UV, weathering and ageing resistance and color stability
- Allow best appearance for aesthetical purposes
-
U-Seal 207 Plus
AGR aftermarket and BTR industry one-part polyurethane direct glazing & structural bonding adhesive
- One-component polyurethane
- Solvent free, odorless
- Short cut-off string
- Suitable for cold and warm application
- Outstanding thixotropy, good decking, non-sagging
- High Modulus - maintains torsional rigidity and increases the vehicles NVH values
- Capable of withstanding high dynamic stresses
- High UV, weathering and ageing resistance and color stability
- Suitable for use with integral aerials
-
U-Seal 205 HM-LC
High modulus, low conductive, ultra-fast curing one-part polyurethane direct glazing & structural bonding adhesive.
- One-component polyurethane
- Solvent free, odorless
- Fast curing
- Suitable for cold and warm application
- Outstanding thixotropy, high decking, non-sagging
- High viscosity, high green strength
- High Modulus - maintains torsional rigidity and increases the vehicles NVH values
- Capable of withstanding high dynamic stresses
- Non-conductive, low volume resistivity
- Suitable for use with integral aerials
- Prevents contact corrosion in aluminum-body vehicles
-
SiMP-Seal 20
One-part SiMP low modulus construction sealant
- Environmentally friendly – Free of isocyanates and solvents
- No hazard symbol required
- No bubble formation - Odorless
- Bonds and seals at the same time
- Permanently elastic; accommodates joint movement of ±25%
- Easy to gun with excellent tooling consistency
- Exceptional thixotropy, non-sagging, short cut off string
- Excellent primerless adhesion on all typical construction and industrial materials
- Non-staining on concrete and porous materials
- Excellent resistance to ageing, weathering; color stable and non-yellowing
- Over-paintable with many water and solvent based paints (preliminary tests recommended)
-
SiMP-Seal 57 HT
High decking and green strength one-part SiMP elastic assembly adhesive
- SiMP Silyl-Modified Polymer
- Solvent and isocyanate free, odorless
- Outstanding thixotropy, non-sagging, short cut-off string
- High green strength: instant grab and load bearing capacity
- High mechanical and dynamic stress resistance
- Shock and impact resistance
- Vibration and sound damping properties
- Increase torsional stiffness of final assembly
- Permanently flexible over a wide range of temperatures
- No bubble formation
- Excellent primerless adhesion on all typical industrial materials and substrates
- Non-staining. Neutral behavior, does not attack support surface
- No Hazard symbol required
- Over-paintable with many water and solvent based paints (preliminary tests recommended)
-
SiMP-Seal 25 HM
One-part SiMP high modulus construction sealant
- Environmentally friendly – Free of isocyanates and solvents
- No hazard symbol required
- No bubble formation - Odorless
- Bonds and seals at the same time
- Permanently elastic; accommodates joint movement of ±20%
- Easy to gun with excellent tooling consistency
- Exceptional thixotropy, non-sagging, short cut off string
- Excellent primerless adhesion on all typical construction and industrial materials
- Non-staining on concrete and porous materials
- Excellent resistance to ageing, weathering; color stable and non-yellowing
- Over-paintable with many water and solvent based paints (preliminary tests recommended)
-
SiMP-Seal 60 HV
High decking, fast curing, primerless to glass one-part SiMP elastic structural, windshield & assembly adhesive
- SiMP Silyl-Modified Polymer
- Solvent and isocyanate free, odorless
- Primerless adhesion to glass, metals and plastics
- Fast application and curing
- Suitable for cold application
- Outstanding thixotropy, high decking, non-sagging
- High viscosity, high green strength
- Capable of withstanding high dynamic stresses
- Suitable for use with integral aerials
- Prevents contact corrosion in aluminum-body vehicles
- No Hazard symbol required
-
S-Bond Deck
One-part SiMP boat deck adhesive
- SiMP Silyl-Modified Polymer
- Ready-to-use, no mixing required
- Solvent and isocyanate free, odorless
- Very low emission according to EMICODE EC1 PLUS
- Fast curing with possibility to be combined to a booster
- No bulging or bubbling effect
- Easy to spread and trowel by spatula
- Easy to remove from hands and from parquet surface
- No Hazard symbol required
- Long term resistance to fresh water, sea water, diluted aqueous cleansing agents
-
SiMP Coat 25
One-part SiMP waterproofing base coat membrane. Breathable, provides water and air barrier and is free of bitumen, solvents and isocyanates
- One component, ready to use: cure starts from adhesion surface and external surface
- Environmentally friendly – free of bitumen, isocyanates and solvents: no smell.
- Environmentally friendly – free of bitumen, isocyanates and solvents: no smell.
- Does not dissolve in water after curing like water-based membranes
- Neutral curing, does not stain, corrode or affect sensible materials like metal, concrete etc.
- Liquid: easy to apply with professional or simple tools, like spatula, brush or roller
- Cold applied: in any situation and any climate
- Full surface adhesion and seamless covering, even on curved surfaces
- In combination with non-woven fabric is suitable to cover details, corners, edges
- Bonds and cures in humid weather and on damp substrates
- Short rain stability time: skin forms after 4 hours and self-protect from rain showers
- Short curing time for short-time application
- Same day application: does not need after- application finishing or reprise
- Provides water vapor permeability, allowing the surface to breathe
- Compatible with most building materials
- Easy to repair in case of damage
- Paintable
-
SiMP Coat AR 100 X
One-part SiMP Aria Polymer waterproofing top coat membrane. Breathable, provides water and air barrier and is free of bitumen, solvent and isocyanates
- One component, ready to use: cure starts from adhesion surface and external surface
- Environmentally friendly – free of bitumen, isocyanates and solvents: no smell
- SiMP aliphatic hybrid polymer: totally bubble-free in the surface and the body
- Does not dissolve in water after curing like water-based membranes
- Neutral curing, does not stain, corrode or affect sensible materials like metal, concrete etc.
- Liquid: easy to apply with professional or simple tools, like spatula, brush or roller
- Cold applied: in any situation and any climate
- Full surface adhesion and seamless covering, even on curved surfaces
- In combination with non-woven fabric is suitable to cover details, corners, edges
- Bonds and cures in humid weather and on damp substrates
- Short rain stability time: skin forms after 4 hours and self-protect from rain showers
- Short curing time for short-time application
- Same day application: does not need after- application finishing or reprise
- Provides water vapor permeability, allowing the surface to breathe
- Compatible with most building materials
- Easy to repair in case of damage
- Paintable
-
SiMP-Seal Teak 680
Watertight, saltwater and UV resistant one-part SiMP teak decks sealant
- SiMP Silyl-Modified Polymer
- Solvent and isocyanate free. Odorless
- Good ageing and weather resistance
- No bubble formation
- Easy to gun with excellent tooling consistency
- No Hazard symbol required
- Excellent weathering resistance - extremely good color stability and UV resistance
- Long term resistance against fresh and salt water
- No gas reaction – Bubbles free, no bulging and shrinking
- Permanently flexible in a temperature range of -40°C to +100°C
- Can be sanded after curing
-
U-Seal 209 Primerless
High viscosity and decking, primerless adhesion one-part polyurethane direct glazing & structural bonding adhesive
- One-component polyurethane
- Solvent free, odorless
- Primerless to glass, ceramic frit and painted metal
- Short cut-off string
- Suitable for cold and warm application
- Outstanding thixotropy, high decking, non-sagging
- High Modulus - maintains torsional rigidity and increases the vehicles NVH values
- Capable of withstanding high dynamic stresses
- High UV, weathering and ageing resistance and color stability
- Suitable for use with integral aerials
-
U-Seal 501
Very fast curing car body repair one-part polyurethane elastic adhesive and sealant
- One-component polyurethane
- Cold applied
- Wide spectrum of ahesion
- Bonds and seals at the same time
- Very fast skinning and curing time
- Over-paintable, even in a short time, with many water and solvent based paints (preliminary tests recommended)
- Can be easily tooled, brushed and smoothed
- Capable of withstanding high dynamic stresses
- Permanently flexible
- Vibration and sound dampening properties
-
U-Seal 907
One-part polyurethane low modulus construction sealant
- Bonds and seals at the same time
- Permanently elastic; accommodates joint movement of ±50%
- Easy to gun with excellent tooling consistency
- Good thixotropy, non-sagging
- Excellent primerless adhesion on all typical construction and industrial materials
- Non-staining on concrete and porous materials
- Good resistance to ageing, weathering and cleansing agents, sea water, lime water
- Over-paintable with many water and solvent based paints (preliminary tests recommended)
-
SiMP-Seal 65
Primerless, high green strength hybrid polymer direct glazing adhesive sealant
- Primerless adhesion
- One-component isocyanate solvent free Silyl-terminated polymer (SiMP)
- Non sag, with short cut-off string. High green strength