Automotive Aftermarket
Body repair & Refinishing
Construction Sealants and Adhesives
General Industry
Indoor sealing and bonding
Sealing & Bonding
Transportation
Transportation Assembly
Return to: Industry
Return to: Construction

Butaflex 200

Elastoplastic butyl sealant

Butaflex is a pasty, non-sagging, butyl-based sealant. The curing takes place by physical drying. This product can be used for a removable plastic sealing of joints in many industrial sectors. Resistant to temporary contact to water, oils, diluted acids/alkaline.

Application fields For the car, bus, truck and caravan industry. Butaflex 200 shows good adhesion on almost every surface with minimal pre-treatment. Suitable for flashings, butt straps and perimeter sealing in roofing and cladding, for sealing seams and joints in vehicle construction, for heating and ventilation ductworks. Suitable for bedding glass into rubber molding in windscreen repair.  
  • Excellent adhesion to metals and plastics
  • Good ageing resistance
  • Remains elastoplastic

You might be interested in



  • U-SEAL 906 AS
    One-part, hydrophilic swelling polyurethane adhesive and sealant

    • Bonds and seals at the same time
    • May be applied on damp surfaces
    • Good thixotropy, non-sagging
    • One-component, east and fast application
    • Excellent primerless adhesion on concrete, plastic, metal and bentonitic stripes
    • Swells in contact with water
    • Expansion rate increasing over time up to 450%, without damage to uncured concrete
    • Resistant to pressures up to 5 bar
    • Returns to the original volume in absence of water
    • Solvent free

  • Cleaner E
    Professional industrial cleaner and remover

  • Placeholder

    S Bond W4


  • U-Seal 550FC
    High thixotropy, fast curing one-part polyurethane elastic adhesive and sealant, which is PVC-free and odorless

    • One-component polyurethane
    • Cold applied
    • Wide spectrum of adhesion
    • Non-sag, exceptional thixotropy and short cut-off string
    • Bonds and seals at the same time
    • Very fast curing through volume
    • Over-paintable, even in a short time, with many water and solvent based paints (preliminary tests recommended)
    • Can be easily tooled, brushed and smoothed
    • Capable of withstanding high dynamic stresses
    • Permanently flexible
    • Vibration and sound dampening properties
  • sealant for sealing glass

    Silicolor
    One-part, acetoxy-curing, silicone sealant available in 32 colors, mold -resistant.

    • 100% Silicone, free from solvents
    • Rapid crosslinking, short skin time
    • Resistant to molds and bacteria
    • Adheres excellently to glass and vitrified surfaces, plastics and most coatings
    • Specific for sanitary areas
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures

  • Silcoflex 587
    One-component silicone sealant with acetic cross-linking, high temperatures resistant

    • Free from solvents
    • Rapid crosslinking, short skin time
    • Adheres excellently to glass and metals
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+250°C) temperatures

  • SiMP 2K Fast

    • Fast strength build-up, handling strength achieved after 60 minutes
    • Simple processing
    • Does not sag or run
    • Very wide primerless adhesion range
    • Suitable for general purpose bonding
    • Neutral behaviour, does not attack support surfaces
    • High mechanical and dynamic stress resistance
    • Impact and vibration resistant (shock absorbing)
    • Spot weldable before curing
    • May be sanded and overpainted
    • Solvent free, odourless

  • SiMP Spray
    One-part hybrid polymer sprayable adhesive and sealant

    • Free of isocyanates and solvents. Odourless
    • Application by spray or by paintbrush
    • No bubble formation
    • Protects against corrosion; does not attack support surfaces
    • Excellent weathering and UV resistance
    • Over-paintable wet on wet (preliminary tests recommended)

  • SiMP-Seal 640
    Multipurpose, wide spectrum adhesion one-part SiMP elastic adhesive and sealant

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free
    • Excellent resistance to ageing and weathering; color stable and non-yellowing
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Neutral behavior, does not attack support surface
    • No Hazard symbol required
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)

  • Activator 440 W
    Adhesion promoter for primerless direct glazing applications

    • Float glass and ceramic coated (frit) glass
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Original PU or MS adhesives cut surface for replacement

  • Silcoflex 589
    One-part, acetoxy-curing, low modulus silicone sealant for glazing and sealing of window frames

    • 100% Silicone, free from solvents
    • Rapid crosslinking, short skin time
    • Adheres excellently to glass, vitrified surfaces and ceramic tiles
    • Resistant to molds and bacteria
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures
  • Placeholder

    Brushable Seam Sealant
    Car body repair one-part brushable seam sealant

    • Cold applied
    • Over-paintable, with many water and solvent based paints (preliminary tests recommended)
    • Can be easily tooled, brushed and smoothed
    • Corrosion protective

  • Silcoflex 595
    One-part, neutral oxime-curing, silicone sealant for indoor and outdoor applications

    • Rapid crosslinking, short skin time
    • Primerless adhesion to most materials
    • Non-corrosive to metals
    • Suitable for alkaline substrates such as concrete, mortar, fibrous cement
    • Adheres excellently to glass and metals
    • Contains fungicides, suitable for use in sanitary areas
    • Odourless
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures
  • X-BOND Two-component adhesive

    X-Bond
    Extreme bonding two-parts acrylate structural adhesive for polyolefins

    • Low surface tension materials bonding
    • No specific surface preparation
    • Fast curing
    • High cohesive resistance, peeling and shear strength

  • U-Bond Ultra 2K – 45 sec
    Plastic repair two-parts polyurethane adhesive

    • Extremely quick full curing
    • Spot weldable before curing
    • Convenient as gap filler. May be sanded and overpainted

  • U-Bond Ultra 2K Assembly
    Structural assembly two-parts polyurethane adhesive

    • Odorless and solvent free
    • Extremely quick grip and curing
    • Spot weldable before curing
    • May be sanded or overpainted

  • PM3 – Spray Gun
    Pneumatic gun for sprayable sealants


  • G+S Cleaner
    Professional foam cleaning agent

    • Active formula aggressive on contaminants
    • Foaming action allow to identify contaminant areas
    • Spray-on/wipe-off foam
    • Does not run
    • Fast dying and residue-free action
    • Efficient as cutout lubricant
    • Efficient as smoothing agent for beading, leaving no traces
    • Efficient as dry cleaner for external body parts and internal upholstery and cockpit

  • Eco Bond Flooring 4 in 1
    One-part SiMP high-elastic strength wood-flooring adhesive

    • SiMP Silyl-Modified Polymer
    • Ready-to-use, no mixing required
    • Solvent and isocyanate free, odorless
    • Acting as a vapor barrier by providing very low vapor permeability
    • Supplying sound insulation due to a reduced impact sound pressure level
    • Having an anti-shock system that guarantees strength and adhesion under real working conditions
    • Having very low VOC emissions certified by EMICODE EC1 PLUS
    • No Hazard symbol required

  • Activator 400 NP
    Adhesion promoter for non-porous substrates

    • Plastics, fiberglass and other synthetic non-porous materials
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Float glass and ceramic coated (frit) glass
  • Placeholder

    SiMP Ultra Tack
    Ultra-high grab and extreme green strength one-part, SiMP elastic assembly adhesive

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free, odourless
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Extreme green strength: Ultra high grab and load bearing capacity
    • High mechanical and dynamic stress resistance
    • Shock and impact resistance
    • Vibration and sound damping properties
    • Increases torsion stiffness in final assembly
    • Very good flow already from +5°C; maximum grab still at +35°C
    • No bubble formation
    • Excellent primerless adhesion on all typical industrial materials and substrates
    • Non-staining. Neutral behavior, does not attack support surface
    • No Hazard symbol required. Odorless
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)

  • SiMP ADVANCED 70 UP
    FEATURES

    • SiMP-Advanced: ultimate mechanical performancesSilyl-Modified Polymer
    • Solvent and isocyanate free, odorless
    • Outstanding thixotropy, non-sagging, short cut-off string
    • High green strength: instant grab and load bearing capacity
    • High mechanical and dynamic stress resistance
    • Shock and impact resistance
    • Vibration and sound damping properties
    • Increase torsional stiffness of final assembly
    • Excellent primerless adhesion on all typical industrial materials and substrates
    • Non-staining. Neutral behavior, does not attack support surface
    • No Hazard symbol required
    • Permanently flexible over a wide range of temperatures
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
    • No bubble formation

  • Silcoflex 599
    One-part, neutral alkoxy-curing, low modulus silicone sealant for facade and glazing applications

    • Rapid crosslinking, short skin time
    • Primerless adhesion to most materials
    • Solvent-free, with limited volume shrinkage during vulcanization
    • Non-corrosive to metals
    • Excellent tooling characteristics for professional use
    • Suitable for alkaline substrates such as concrete, mortar, fibrous cement
    • Matt finish, odourless
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures

  • Silcoflex 590
    One-part neutral alkoxy-curing low modulus silicone sealant for indoor and outdoor applications

    • Rapid crosslinking, short skin time
    • Primerless adhesion to most materials
    • Non-corrosive to metals
    • Suitable for alkaline substrates such as concrete, mortar, fibrous cement
    • Adheres excellently to glass and metals
    • Contains fugicides, suitable for use in sanitary areas
    • Odourless
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures
  • construction sealant, glazing sealant, SILCOFLEX 581 CRISTALLINO

    Silcoflex 581 Cristallino
    One-part, acetoxy-curing, highly transparent universal silicone sealant

    • Rapid crosslinking, short skin time
    • Highly transparent
    • Adheres excellently to glass, vitrified surfaces and ceramic tiles
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures

  • Silcoflex 583
    One-part, acetoxy-curing, high temperature resistant silicone sealant, black

    • Free from solvents
    • Rapid crosslinking, short skin time
    • Adheres excellently to glass and metals
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+250°C) temperatures
  • construction sealant for bathroom, SILCOFLEX 585

    Silcoflex 585
    One-part, acetoxy-curing, low modulus silicone sealant. Mold-resistant sanitary sealant

    • 100% Silicone, free from solvents
    • Rapid crosslinking, short skin time
    • Adheres excellently to glass, vitrified surfaces and ceramic tiles
    • Dedicated to sanitary areas
    • Resists to molds and bacteria
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures

  • CSG 210 Gun
    Pneumatic gun for cartridges


  • U-Seal 204 Speed
    High decking, fast curing one-part polyurethane direct glazing & structural bonding adhesive. 1 hour Drive Away Time Compliant

    • One-component polyurethane
    • Solvent free, odorless
    • Fast curing
    • Suitable for cold and warm application
    • Outstanding thixotropy, high decking, non-sagging
    • High viscosity, high green strength
    • High Modulus - maintains torsional rigidity and increases the vehicles NVH values
    • Capable of withstanding high dynamic stresses
    • Suitable for use with integral aerials

  • U-Seal 500
    One-part polyurethane multipurpose adhesive sealant

    • Bonds and seals at the same time
    • Permanently elastic; accommodates joint movement of ±25%
    • Easy to gun with excellent tooling consistency
    • Good thixotropy, non-sagging
    • Shock and impact resistance
    • Vibration and sound dampening properties
    • Excellent primerless adhesion on all typical construction and industrial materials
    • Elastic bonding between metal, plastic, glass and other materials
    • Non-staining. Neutral behavior, does not attack support surface
    • Good resistance to ageing, weathering and cleansing agents, sea water, lime water
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)

  • SiMP Fix Crystal
    One-part SiMP crystal clear elastic adhesive and sealant

    • Crystal clear
    • Excellent resistance to ageing, weathering; color stable, non-yellowing and non-chalking
    • Environmentally friendly – Free of isocyanates and solvents
    • No hazard symbol required
    • No bubble formation - Odorless
    • Bonds and seals at the same time
    • Permanently elastic
    • Easy to gun with excellent tooling consistency
    • Exceptional thixotropy, non-sagging, short cut off string
    • No change in volume, no shrinkage
    • Good primerless adhesion on all typical construction and industrial materials
    • Non-staining on concrete and porous materials
  • single-component silicone sealant for sealing and bonding in food applications

    S-Sil Food
    One-part, acetoxy-curing, low-modulus silicone sealant for sealing and glazing food equipment materials and drinking water contact. Certified according to ANSI/NSF Standard 51.

    • 100% Silicone, free from solvents
    • Suitable for food and drinking water contact
    • Rapid crosslinking, short skin time
    • Adheres excellently to glass and vitrified surfaces, plastics and most coatings
    • Non-sagging, low shrinkage
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high temperatures (+100°C)
  • Placeholder

    U-Seal 207 SA
    Special Adhesion AGR aftermarket one-part polyurethane direct glazing & structural bonding adhesive

    • One-component polyurethane
    • Solvent free, odorless
    • Primerless to glass, ceramic frit and painted metal
    • Short cut-off string
    • Suitable for cold and warm application
    • Outstanding thixotropy, good decking, non-sagging
    • High Modulus - maintains torsional rigidity and increases the vehicles NVH values
    • Capable of withstanding high dynamic stresses
    • High UV, weathering and ageing resistance
    • Suitable for use with integral aerials

  • Activator 420 GL
    Adhesion promoter for glass and non-porous substrates

    • Float glass and ceramic coated (frit) glass
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Original PU or MS adhesives cut surface for replacement
    • Plastics

  • U-Seal 501
    Very fast curing car body repair one-part polyurethane elastic adhesive and sealant

    • One-component polyurethane
    • Cold applied
    • Wide spectrum of ahesion
    • Bonds and seals at the same time
    • Very fast skinning and curing time
    • Over-paintable, even in a short time, with many water and solvent based paints (preliminary tests recommended)
    • Can be easily tooled, brushed and smoothed
    • Capable of withstanding high dynamic stresses
    • Permanently flexible
    • Vibration and sound dampening properties

  • SiMP-Seal 650
    Multipurpose one-part SiMP elastic adhesive and sealant. Completely odorless and very low emissions

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free. No Hazard symbol required
    • Emicode EC1 certified with very low emission, thanks to its specific formulation
    • Completely odorless
    • Excellent resistance to ageing and weathering
    • Completely color stable
    • White color as pure and non-yellowish
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Neutral behavior, does not attack support surface
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
    • Short time resistant up to +180 °C for powder and thermal coating
  • automotive industry adhesive, U-BOND ULTRA 2K 5MIN 50ML

    U-Bond Ultra 2K – 1 & 5 min
    Plastic repair two-parts polyurethane adhesive

    • Odorless and solvent free
    • Extremely quick full curing
    • Spot weldable before curing
    • Convenient as gap filler. May be sanded and overpainted

  • Glass Wipe Cleaner
    Single use cleaner and remover wipe