Fuoco 1500

Silcoflex 583

One-part, acetoxy-curing, high temperature resistant silicone sealant, black

• Free from solvents
• Rapid crosslinking, short skin time
• Adheres excellently to glass and metals
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+250°C) temperatures

U-Bond Ultra 2K Assembly

Structural assembly two-parts polyurethane adhesive

• Odorless and solvent free
• Extremely quick grip and curing
• Spot weldable before curing
• May be sanded or overpainted

Activator 400 NP

Adhesion promoter for non-porous substrates

• Plastics, fiberglass and other synthetic non-porous materials
• Painted surfaces and coatings (epoxy and polyester painted sheet steel)
• Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
• Float glass and ceramic coated (frit) glass

SiMP-Seal 640

Multipurpose, wide spectrum adhesion one-part SiMP elastic adhesive and sealant

• SiMP Silyl-Modified Polymer
• Solvent and isocyanate free
• Excellent resistance to ageing and weathering; color stable and non-yellowing
• Outstanding thixotropy, non-sagging, short cut-off string
• Permanently flexible over a wide range of temperatures
• No bubble formation
• Easy to gun with excellent tooling consistency
• Excellent primerless adhesion on all typical construction and industrial materials and substrates
• Neutral behavior, does not attack support surface
• No Hazard symbol required
• Over-paintable with many water and solvent based paints (preliminary tests recommended)

SiMP Fix Crystal

One-part SiMP crystal clear elastic adhesive and sealant

• Crystal clear
• Excellent resistance to ageing, weathering; color stable, non-yellowing and non-chalking
• Environmentally friendly – Free of isocyanates and solvents
• No hazard symbol required
• No bubble formation - Odorless
• Bonds and seals at the same time
• Permanently elastic
• Easy to gun with excellent tooling consistency
• Exceptional thixotropy, non-sagging, short cut off string
• No change in volume, no shrinkage
• Good primerless adhesion on all typical construction and industrial materials
• Non-staining on concrete and porous materials

G+S Cleaner

Professional foam cleaning agent

• Active formula aggressive on contaminants
• Foaming action allow to identify contaminant areas
• Spray-on/wipe-off foam
• Does not run
• Fast dying and residue-free action
• Efficient as cutout lubricant
• Efficient as smoothing agent for beading, leaving no traces
• Efficient as dry cleaner for external body parts and internal upholstery and cockpit

U-Bond Ultra 2K – 1 & 5 min

Plastic repair two-parts polyurethane adhesive

• Odorless and solvent free
• Extremely quick full curing
• Spot weldable before curing
• Convenient as gap filler. May be sanded and overpainted

SiMP Ultra Tack

Ultra-high grab and extreme green strength one-part, SiMP elastic assembly adhesive

• SiMP Silyl-Modified Polymer
• Solvent and isocyanate free, odourless
• Outstanding thixotropy, non-sagging, short cut-off string
• Extreme green strength: Ultra high grab and load bearing capacity
• High mechanical and dynamic stress resistance
• Shock and impact resistance
• Vibration and sound damping properties
• Increases torsion stiffness in final assembly
• Very good flow already from +5°C; maximum grab still at +35°C
• No bubble formation
• Excellent primerless adhesion on all typical industrial materials and substrates
• Non-staining. Neutral behavior, does not attack support surface
• No Hazard symbol required. Odorless
• Over-paintable with many water and solvent based paints (preliminary tests recommended)

Silcoflex 599

One-part, neutral alkoxy-curing, low modulus silicone sealant for facade and glazing applications

• Rapid crosslinking, short skin time
• Primerless adhesion to most materials
• Solvent-free, with limited volume shrinkage during vulcanization
• Non-corrosive to metals
• Excellent tooling characteristics for professional use
• Suitable for alkaline substrates such as concrete, mortar, fibrous cement
• Matt finish, odourless
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) temperatures

SiMP-Seal 650

Multipurpose one-part SiMP elastic adhesive and sealant. Completely odorless and very low emissions

• SiMP Silyl-Modified Polymer
• Solvent and isocyanate free. No Hazard symbol required
• Emicode EC1 certified with very low emission, thanks to its specific formulation
• Completely odorless
• Excellent resistance to ageing and weathering
• Completely color stable
• White color as pure and non-yellowish
• Outstanding thixotropy, non-sagging, short cut-off string
• Permanently flexible over a wide range of temperatures
• No bubble formation
• Easy to gun with excellent tooling consistency
• Excellent primerless adhesion on all typical construction and industrial materials and substrates
• Neutral behavior, does not attack support surface
• Over-paintable with many water and solvent based paints (preliminary tests recommended)
• Short time resistant up to +180 °C for powder and thermal coating

Eco Bond Flooring 4 in 1

One-part SiMP high-elastic strength wood-flooring adhesive

• SiMP Silyl-Modified Polymer
• Ready-to-use, no mixing required
• Solvent and isocyanate free, odorless
• Acting as a vapor barrier by providing very low vapor permeability
• Supplying sound insulation due to a reduced impact sound pressure level
• Having an anti-shock system that guarantees strength and adhesion under real working conditions
• Having very low VOC emissions certified by EMICODE EC1 PLUS
• No Hazard symbol required

Activator 440 W

Adhesion promoter for primerless direct glazing applications

• Float glass and ceramic coated (frit) glass
• Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
• Painted surfaces and coatings (epoxy and polyester painted sheet steel)
• Original PU or MS adhesives cut surface for replacement

Cleaner E

Professional industrial cleaner and remover

Silcoflex 595

One-part, neutral oxime-curing, silicone sealant for indoor and outdoor applications

• Rapid crosslinking, short skin time
• Primerless adhesion to most materials
• Non-corrosive to metals
• Suitable for alkaline substrates such as concrete, mortar, fibrous cement
• Adheres excellently to glass and metals
• Contains fungicides, suitable for use in sanitary areas
• Odourless
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) temperatures

Activator 420 GL

Adhesion promoter for glass and non-porous substrates

• Float glass and ceramic coated (frit) glass
• Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
• Painted surfaces and coatings (epoxy and polyester painted sheet steel)
• Original PU or MS adhesives cut surface for replacement
• Plastics

SiMP ADVANCED 70 UP

Ultimate mechanical strength, primerless to glass one-part SiMP-Advanced elastic adhesive

• SiMP-Advanced: ultimate mechanical performancesSilyl-Modified Polymer
• Solvent and isocyanate free, odorless
• Outstanding thixotropy, non-sagging, short cut-off string
• High green strength: instant grab and load bearing capacity
• High mechanical and dynamic stress resistance
• Shock and impact resistance
• Vibration and sound damping properties
• Increase torsional stiffness of final assembly
• Excellent primerless adhesion on all typical industrial materials and substrates
• Non-staining. Neutral behavior, does not attack support surface
• No Hazard symbol required
• Permanently flexible over a wide range of temperatures
• Over-paintable with many water and solvent based paints (preliminary tests recommended)
• No bubble formation

Glass Wipe Cleaner

Single use cleaner and remover wipe

U-SEAL 906 AS

One-part, hydrophilic swelling polyurethane adhesive and sealant

• Bonds and seals at the same time
• May be applied on damp surfaces
• Good thixotropy, non-sagging
• One-component, east and fast application
• Excellent primerless adhesion on concrete, plastic, metal and bentonitic stripes
• Swells in contact with water
• Expansion rate increasing over time up to 450%, without damage to uncured concrete
• Resistant to pressures up to 5 bar
• Returns to the original volume in absence of water
• Solvent free

SiMP 2K Fast

• Fast strength build-up, handling strength achieved after 60 minutes
• Simple processing
• Does not sag or run
• Very wide primerless adhesion range
• Suitable for general purpose bonding
• Neutral behaviour, does not attack support surfaces
• High mechanical and dynamic stress resistance
• Impact and vibration resistant (shock absorbing)
• Spot weldable before curing
• May be sanded and overpainted
• Solvent free, odourless

Brushable Seam Sealant

Car body repair one-part brushable seam sealant

• Cold applied
• Over-paintable, with many water and solvent based paints (preliminary tests recommended)
• Can be easily tooled, brushed and smoothed
• Corrosion protective

CSG 210 Gun

Pneumatic gun for cartridges

Silcoflex 589

One-part, acetoxy-curing, low modulus silicone sealant for glazing and sealing of window frames

• 100% Silicone, free from solvents
• Rapid crosslinking, short skin time
• Adheres excellently to glass, vitrified surfaces and ceramic tiles
• Resistant to molds and bacteria
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) temperatures

Silcoflex 590

One-part neutral alkoxy-curing low modulus silicone sealant for indoor and outdoor applications

• Rapid crosslinking, short skin time
• Primerless adhesion to most materials
• Non-corrosive to metals
• Suitable for alkaline substrates such as concrete, mortar, fibrous cement
• Adheres excellently to glass and metals
• Contains fugicides, suitable for use in sanitary areas
• Odourless
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) temperatures

S-Sil Food

One-part, acetoxy-curing, low-modulus silicone sealant for sealing and glazing food equipment materials and drinking water contact. Certified according to ANSI/NSF Standard 51.

• 100% Silicone, free from solvents
• Suitable for food and drinking water contact
• Rapid crosslinking, short skin time
• Adheres excellently to glass and vitrified surfaces, plastics and most coatings
• Non-sagging, low shrinkage
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high temperatures (+100°C)

S Bond W4

Silcoflex 587

One-component silicone sealant with acetic cross-linking, high temperatures resistant

• Free from solvents
• Rapid crosslinking, short skin time
• Adheres excellently to glass and metals
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+250°C) temperatures

Silcoflex 581 Cristallino

One-part, acetoxy-curing, highly transparent universal silicone sealant

• Rapid crosslinking, short skin time
• Highly transparent
• Adheres excellently to glass, vitrified surfaces and ceramic tiles
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) temperatures

Silicolor

One-part, acetoxy-curing, silicone sealant available in 32 colors, mold -resistant.

• 100% Silicone, free from solvents
• Rapid crosslinking, short skin time
• Resistant to molds and bacteria
• Adheres excellently to glass and vitrified surfaces, plastics and most coatings
• Specific for sanitary areas
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) temperatures

Silcoflex 585

One-part, acetoxy-curing, low modulus silicone sealant. Mold-resistant sanitary sealant

• 100% Silicone, free from solvents
• Rapid crosslinking, short skin time
• Adheres excellently to glass, vitrified surfaces and ceramic tiles
• Dedicated to sanitary areas
• Resists to molds and bacteria
• Non-sagging
• Excellent weathering, ageing and UV resistance
• Easy extrusion at low (+5°C) and high (+40°C) temperatures
• Flexible at low (-40°C) and high (+100°C) temperatures

PM3 – Spray Gun

Pneumatic gun for sprayable sealants