Construction Sealants and Adhesives
General Industry
Glazing and Windows
Indoor sealing and bonding
Sealing & Bonding
Wood-working/Assembly
Return to: Industry
Return to: Construction

SiMP CLEAR

One-part SiMP clear elastic adhesive and sealant

SiMP Clear is a one-component, gun-grade, non-sag SiMP – Silyl Modified Polymer clear elastic adhesive and sealant. It cures under the influence of atmospheric moisture to form a high-performance compound with permanent elasticity and high resistance to ageing and weathering. Solvent- and isocyanate-free.   

Areas of Application  SiMP Clear is a high quality and versatile clear adhesive and sealant for different application in house interior fitting, construction finishing, furniture and industrial assembly where a clear bond or seal is necessary.  Suitable for transparent elastic bonding between metal, plastic, glass and other materials, joints between window or door frames, mirror and glass assembly.   

SUITABLE FOR INDOOR AND OUTDOOR BONDING. SUITABLE FOR INDOOR SEALING ONLY. WITH PROLONGED UV RADIATION PRODUCTS CAN DISCOLOR AND BECOME LESS UV STABLE 

Certified according to:   EN 15651-1/3/4 TYPE F INT-EXT  Emicode EC1   

Compliant to:  LEED iEQc 4.1; SCAQMD Rule 1168; BAAQMD Reg 8 Rule 51  CARB VOC levels regulation 
  • Clear trasparency
  • Environmentally friendly – Free of isocyanates and solvents
  • No hazard symbol required
  • No bubble formation - Odorless
  • Bonds and seals at the same time 
  • Permanently elastic
  • Easy to gun with excellent tooling consistency
  • Exceptional thixotropy, non-sagging, short cut off string
  • No change in volume, no shrinkage
  • Good primerless adhesion on all typical construction and industrial materials
  • Non-staining on concrete and porous materials

You might be interested in


  • Placeholder

    Eco Bond Flooring 4 in 1
    One-part SiMP high-elastic strength wood-flooring adhesive

    • SiMP Silyl-Modified Polymer
    • Ready-to-use, no mixing required
    • Solvent and isocyanate free, odorless
    • Easy to spread and trowel by spatula with excellent ridge holding consistency
    • Rapid grab and high filling capacity
    • Suitable for subfloor heating
    • Easy to remove from hands and from parquet surface
    • No Hazard symbol required
  • Placeholder

    Brushable Seam Sealant
    Car body repair one-part brushable seam sealant

    • Cold applied
    • Over-paintable, with many water and solvent based paints (preliminary tests recommended)
    • Can be easily tooled, brushed and smoothed
    • Corrosion protective
  • One-part polyurethane fast curing translucent paste adhesive

    U-Bond 309 TFC
    One-part polyurethane fast curing translucent paste adhesive

    • One-component polyurethane
    • Translucent, for invisible bonding line
    • Very fast setting
    • Cold applied, gun grade
    • Easy-to-use, non-sagging
    • Very low foaming with high filling capacity
    • Excellent adhesion on numerous substrates like insulating material, wood, plastic and metal
    • Solvent free - Odourless
    • Weathering resistance according to DIN 204 D4
    • Resistant to ageing
    • Resistant to chemicals
  • Placeholder

    U-Seal 204 Speed
    High decking, fast curing one-part polyurethane direct glazing & structural bonding adhesive. 1 hour Drive Away Time Compliant

    • One-component polyurethane
    • Solvent free, odorless
    • Fast curing
    • Suitable for cold and warm application
    • Outstanding thixotropy, high decking, non-sagging
    • High viscosity, high green strength
    • High Modulus - maintains torsional rigidity and increases the vehicles NVH values
    • Capable of withstanding high dynamic stresses
    • Suitable for use with integral aerials
  • construction sealant, sealing glass and glass, glass and aluminium, SILCOFLEX 589

    Silcoflex 589
    One-part, acetoxy-curing, low modulus silicone sealant for glazing and sealing of window frames

    • 100% Silicone, free from solvents
    • Rapid crosslinking, short skin time
    • Adheres excellently to glass, vitrified surfaces and ceramic tiles
    • Resistant to molds and bacteria
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures
  • One-part polyurethane fast curing paste adhesive

    U-Bond 307 FC
    One-part polyurethane fast curing paste adhesive

    • One-component polyurethane
    • Very fast setting
    • Cold applied, gun grade
    • Easy-to-use, non-sagging
    • Very low foaming with high filling capacity
    • Excellent adhesion on numerous substrates like insulating material, wood, plastic and metal
    • Solvent free – Odorless
    • Weathering resistance according to DIN 204 D4
    • Resistant to ageing
    • Resistant to chemicals
  • automotive adhesive, sealing and bonding in car body, U-SEAL 500

    U-Seal 500
    One-part polyurethane multipurpose adhesive sealant

    • Bonds and seals at the same time
    • Permanently elastic; accommodates joint movement of ±25%
    • Easy to gun with excellent tooling consistency
    • Good thixotropy, non-sagging
    • Shock and impact resistance
    • Vibration and sound dampening properties
    • Excellent primerless adhesion on all typical construction and industrial materials
    • Elastic bonding between metal, plastic, glass and other materials
    • Non-staining. Neutral behavior, does not attack support surface
    • Good resistance to ageing, weathering and cleansing agents, sea water, lime water
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
  • One-part liquid polyurethane adhesive for wood and panel bonding, U-BOND 301

    U-Bond 301
    One-part liquid polyurethane adhesive for wood and panel bonding

    • Easy-to-use. Pourable from twist-cap bottle to automatic dispensing industrial equipment
    • Controlled foaming grade with good filling capacity
    • Panel lamination and assembly
    • Outdoor applications for woodworking
    • Structural Bonding of construction materials
  • waterproofing joints, seal glass, SILCOFLEX 590

    Silcoflex 590
    One-part neutral alkoxy-curing low modulus silicone sealant for indoor and outdoor applications

    • Rapid crosslinking, short skin time
    • Primerless adhesion to most materials
    • Non-corrosive to metals
    • Suitable for alkaline substrates such as concrete, mortar, fibrous cement
    • Adheres excellently to glass and metals
    • Contains fugicides, suitable for use in sanitary areas
    • Odourless
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures

  • SiMP-Seal 640
    Multipurpose, wide spectrum adhesion one-part SiMP elastic adhesive and sealant

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free
    • Excellent resistance to ageing and weathering; color stable and non-yellowing
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Neutral behavior, does not attack support surface
    • No Hazard symbol required
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)

  • Silcoflex 595
    One-part, neutral oxime-curing, silicone sealant for indoor and outdoor applications

    • Rapid crosslinking, short skin time
    • Primerless adhesion to most materials
    • Non-corrosive to metals
    • Suitable for alkaline substrates such as concrete, mortar, fibrous cement
    • Adheres excellently to glass and metals
    • Contains fungicides, suitable for use in sanitary areas
    • Odourless
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures
  • Placeholder

    Activator 420 GL
    Adhesion promoter for glass and non-porous substrates

    • Float glass and ceramic coated (frit) glass
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Original PU or MS adhesives cut surface for replacement
    • Plastics
  • construction sealant for bathroom, SILCOFLEX 585

    Silcoflex 585
    One-part, acetoxy-curing, low modulus silicone sealant. Mold-resistant sanitary sealant

    • 100% Silicone, free from solvents
    • Rapid crosslinking, short skin time
    • Adheres excellently to glass, vitrified surfaces and ceramic tiles
    • Dedicated to sanitary areas
    • Resists to molds and bacteria
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures
  • Placeholder

    SiMP-Seal 650
    Multipurpose one-part SiMP elastic adhesive and sealant. Completely odorless and very low emissions

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free. No Hazard symbol required
    • Emicode EC1 certified with very low emission, thanks to its specific formulation
    • Completely odorless
    • Excellent resistance to ageing and weathering
    • Completely color stable
    • White color as pure and non-yellowish
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Neutral behavior, does not attack support surface
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
    • Short time resistant up to +180 °C for powder and thermal coating
  • sealant for sealing glass

    Silicolor
    One-part, acetoxy-curing, silicone sealant available in 32 colors, mold -resistant.

    • 100% Silicone, free from solvents
    • Rapid crosslinking, short skin time
    • Resistant to molds and bacteria
    • Adheres excellently to glass and vitrified surfaces, plastics and most coatings
    • Specific for sanitary areas
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures
  • One-part polyurethane paste adhesive

    U-Bond 305
    One-part polyurethane paste adhesive

    • One-component polyurethane
    • Cold applied, gun grade
    • Easy-to-use, non-sagging
    • Very low foaming with high filling capacity
    • Excellent adhesion on numerous substrates like insulating material, wood, plastic and metal
    • Solvent free Odorless
    • Weathering resistance according to DIN 204 D4
    • Resistant to ageing
    • Resistant to chemicals
  • solvents for the removal of dirty residues of just-applied polyurethane foams

    Polipur Scioglischiuma
    Powerful polyurethane foam cleaner

    • Fast reacting to melt fresh foam
    • Powerful cleaner also suitable for cleaning tools
    • Dual dispenser, both manual and with automatic gun thread
  • Placeholder

    Activator 440 W
    Adhesion promoter for primerless direct glazing applications

    • Float glass and ceramic coated (frit) glass
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Original PU or MS adhesives cut surface for replacement
  • Simp polymer elastic adhesive

    SiMP-Seal 55
    Multipurpose, wide spectrum adhesion one-part SiMP elastic adhesive and sealant

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free
    • Good ageing and weather resistance
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Neutral behavior, does not attack support surface
    • No Hazard symbol required
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
  • construction sealant SILCOFLEX 587

    Silcoflex 587
    One-part, acetoxy-curing, high temperature resistant silicone sealant, red

    • Free from solvents
    • Rapid crosslinking, short skin time
    • Adheres excellently to glass and metals
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+250°C) temperatures

  • CSG 210 Gun
    Pneumatic gun for cartridges

  • construction sealant ror seals resistant to high temperature 06222 SILCOFLEX 583

    Silcoflex 583
    One-part, acetoxy-curing, high temperature resistant silicone sealant, black

    • Free from solvents
    • Rapid crosslinking, short skin time
    • Adheres excellently to glass and metals
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+250°C) temperatures

  • PM3 – Spray Gun
    Pneumatic gun for sprayable sealants

  • Placeholder

    SiMP Ultra Tack
    Ultra-high grab and extreme green strength one-part, SiMP elastic assembly adhesive

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free, odourless
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Extreme green strength: Ultra high grab and load bearing capacity
    • High mechanical and dynamic stress resistance
    • Shock and impact resistance
    • Vibration and sound damping properties
    • Increases torsion stiffness in final assembly
    • Very good flow already from +5°C; maximum grab still at +35°C
    • No bubble formation
    • Excellent primerless adhesion on all typical industrial materials and substrates
    • Non-staining. Neutral behavior, does not attack support surface
    • No Hazard symbol required. Odorless
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
  • Placeholder

    Activator 400 NP
    Adhesion promoter for non-porous substrates

    • Plastics, fiberglass and other synthetic non-porous materials
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Float glass and ceramic coated (frit) glass
  • construction sealant, glazing sealant, SILCOFLEX 581 CRISTALLINO

    Silcoflex 581 Cristallino
    One-part, acetoxy-curing, highly transparent universal silicone sealant

    • Rapid crosslinking, short skin time
    • Highly transparent
    • Adheres excellently to glass, vitrified surfaces and ceramic tiles
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures
  • Placeholder

    Cleaner E
    Professional industrial cleaner and remover

  • construction sealant, glazing sealant, Single-component silicone sealant, SILCOFLEX 599

    Silcoflex 599
    One-part, neutral alkoxy-curing, low modulus silicone sealant for facade and glazing applications

    • Rapid crosslinking, short skin time
    • Primerless adhesion to most materials
    • Solvent-free, with limited volume shrinkage during vulcanization
    • Non-corrosive to metals
    • Excellent tooling characteristics for professional use
    • Suitable for alkaline substrates such as concrete, mortar, fibrous cement
    • Matt finish, odourless
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures
  • construction sealant, sealing and fixing glass SILCOFLEX 470

    Silcoflex 470
    One-part, acetoxy-curing, universal silicone sealant. Mold-resistant.

    • Rapid crosslinking, short skin time
    • Adheres excellently to glass and vitrified surfaces, plastics and most coatings
    • Suitable for sanitary areas
    • Resistant to molds and bacteria
    • Non-sagging
    • Excellent weathering, ageing and UV resistance
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high (+100°C) temperatures
  • Placeholder

    SiMP-Seal 45 UV
    Highly UV and weather resistant one-part SiMP elastic adhesive and sealant

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free, odourless
    • Extremely high UV, ageing and weather resistance
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No change in volume – No shrinkage
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Non-staining. Neutral behavior, does not attack support surface
    • No Hazard symbol required
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
  • Placeholder

    SiMP Crystal
    One-part SiMP crystal clear elastic adhesive and sealant

    • Crystal clear
    • Excellent resistance to ageing, weathering; color stable, non-yellowing and non-chalking
    • Environmentally friendly – Free of isocyanates and solvents
    • No hazard symbol required
    • No bubble formation - Odorless
    • Bonds and seals at the same time 
    • Permanently elastic
    • Easy to gun with excellent tooling consistency
    • Exceptional thixotropy, non-sagging, short cut off string
    • No change in volume, no shrinkage
    • Good primerless adhesion on all typical construction and industrial materials
    • Non-staining on concrete and porous materials

  • G+S Cleaner
    Professional foam cleaning agent

    • Active formula aggressive on contaminants
    • Foaming action allow to identify contaminant areas
    • Spray-on/wipe-off foam
    • Does not run
    • Fast dying and residue-free action
    • Efficient as cutout lubricant
    • Efficient as smoothing agent for beading, leaving no traces
    • Efficient as dry cleaner for external body parts and internal upholstery and cockpit
  • single-component silicone sealant for sealing and bonding in food applications

    S-Sil Food
    One-part, acetoxy-curing, low-modulus silicone sealant for sealing and glazing food equipment materials and drinking water contact. Certified according to ANSI/NSF Standard 51.

    • 100% Silicone, free from solvents
    • Suitable for food and drinking water contact
    • Rapid crosslinking, short skin time
    • Adheres excellently to glass and vitrified surfaces, plastics and most coatings
    • Non-sagging, low shrinkage
    • Easy extrusion at low (+5°C) and high (+40°C) temperatures
    • Flexible at low (-40°C) and high temperatures (+100°C)
  • Placeholder

    SiMP 2K Fast

    • Privo di solventi ed isocianati
    • Tempo aperto 4 min a 23°C - 50%UR
    • Tempo di presa 30 min
    • Perfettamente flessibile
    • Sovraverniciabile con vernici a base solvente e a base acqua
  • Two-part SiMP low viscosity adhesive

    SiMP 2K 50LV
    Two-parts SiMP low viscosity flexible adhesive

    • Environmentally friendly, free of isocyanates and solvents, no Hazard symbol
    • No bubble formation - Odorless
    • Reticulation through volume even between non-porous materials and at low temperatures
    • Permanently flexible over a wide range of temperatures
    • No change in volume - No shrinkage
    • Low viscosity - easy to apply with spray, towel or roller
    • Non-sag in vertical application, fast grab effect
    • Excellent primerless adhesion on all typical construction and industrial materials
    • Fast strength build-up
    • Neutral behavior, does not attack support surfaces
    • Impact and vibration resistance (shock absorbing)
    • Spot weldable before curing
  • Placeholder

    S Bond W4


  • Polipur B2 Termoacustica
    One-part high thermal and acoustic insulation polyurethane foam. For manual or gun application.

    • High quality professional polyurethane foam
    • Excellent stability; no shrinkage
    • High thermal and acoustic insulation
    • Provides very good sound reduction and avoids air loss
    • Reaction to fire: class B2 Fire retardant (DIN 4102)
    • High adhesion power to most building materials
    • High yield aerosol can 750ml for automatic gun application
    • Paintable
  • Placeholder

    U-Seal 207 SA
    Special Adhesion AGR aftermarket one-part polyurethane direct glazing & structural bonding adhesive

    • One-component polyurethane
    • Solvent free, odorless
    • Primerless to glass, ceramic frit and painted metal
    • Short cut-off string
    • Suitable for cold and warm application
    • Outstanding thixotropy, good decking, non-sagging
    • High Modulus - maintains torsional rigidity and increases the vehicles NVH values
    • Capable of withstanding high dynamic stresses
    • High UV, weathering and ageing resistance
    • Suitable for use with integral aerials
  • Placeholder

    Glass Wipe Cleaner
    Single use cleaner and remover wipe