Sigill Block Display Kit

Activator 420 GL

Adhesion promoter for glass and non-porous substrates

• Float glass and ceramic coated (frit) glass
• Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
• Painted surfaces and coatings (epoxy and polyester painted sheet steel)
• Original PU or MS adhesives cut surface for replacement
• Plastics

SiMP ADVANCED 70 UP

Ultimate mechanical strength, primerless to glass one-part SiMP-Advanced elastic adhesive

• SiMP-Advanced: ultimate mechanical performancesSilyl-Modified Polymer
• Solvent and isocyanate free, odorless
• Outstanding thixotropy, non-sagging, short cut-off string
• High green strength: instant grab and load bearing capacity
• High mechanical and dynamic stress resistance
• Shock and impact resistance
• Vibration and sound damping properties
• Increase torsional stiffness of final assembly
• Excellent primerless adhesion on all typical industrial materials and substrates
• Non-staining. Neutral behavior, does not attack support surface
• No Hazard symbol required
• Permanently flexible over a wide range of temperatures
• Over-paintable with many water and solvent based paints (preliminary tests recommended)
• No bubble formation

Silgasket Grey/Black

One-part, neutral oxime-curing, high temperature resistant RTV grey or black silicone gasket in pressure pack

• No caulking gun required
• Resists sagging and slumping when applied overhead or on sidewall joints
• Double piston pressurized can - Allows for smoother, effortless application
• Special nozzle, allows the user to control the width of the bead 
• Forms a tough rubber gasket seal
• Withstands extreme temperature cycling, -60°C to 250°C (peaks up to 300 °C)
• Resists oil, transmission fluids, water and antifreeze
• Supports repeated heat/cold cycles
• Easily applied, resistant within minutes

G+S Cleaner

Professional foam cleaning agent

• Active formula aggressive on contaminants
• Foaming action allow to identify contaminant areas
• Spray-on/wipe-off foam
• Does not run
• Fast dying and residue-free action
• Efficient as cutout lubricant
• Efficient as smoothing agent for beading, leaving no traces
• Efficient as dry cleaner for external body parts and internal upholstery and cockpit

Siliblack

Paste, one-part, acetoxy-curing, high temperature resistant RTV silicone gasket, black

• Forms a tough rubber gasket seal
• Will not slump in overhead or vertical applications
• Withstands extreme temperature cycling, -60°C to 250°C (peaks up to 300 °C)
• Resists oils, transimission fluids, water and antifreeze
• Supports repeated heat/cold cycles
• Easily applied, resistant within minutes

Silgasket Red

One-part, acetoxy-curing, high temperature resistant RTV red silicone gasket in pressure pack

• No caulking gun required
• Resists sagging and slumping when applied overhead or on sidewall joints
• Double piston pressurized can - Allows for smoother, effortless application
• Special nozzle, allows the user to control the width of the bead 
• Forms a tough rubber gasket seal
• Withstands extreme temperature cycling, -60°C to 250°C (peaks up to 300 °C)
• Resists oil, transmission fluids, water and antifreeze
• Supports repeated heat/cold cycles
• Easily applied, resistant within minutes

Silimotor

Self-levelling, one-part, acetoxy-curing, high temperature resistant RTV silicone gasket, red

• Self-levelling, forms a tought rubber gasket seal
• Withstands extreme temperature cycling, -60°C to 250°C (peaks up to 300 °C)
• Resists oil, transmission fluids, water and antifreeze
• Supports repeated heat/cold cycles
• Easily applied, resistant within minutes

U-Bond Ultra 2K Assembly

Structural assembly two-parts polyurethane adhesive

• Odorless and solvent free
• Extremely quick grip and curing
• Spot weldable before curing
• May be sanded or overpainted

Red RTV Gasket

One-part, acetoxy-curing, high temperature resistant RTV silicone gasket, red

• Forms a tough rubber gasket seal
• Will not slump in overhead or vertical applications
• Withstands extreme temperature cycling, -40°C to 250°C
• Resists oils, transmission fluids, water and antifreeze
• Supports repeated heat/cold cycles
• Easily applied, resistant within minutes

Block Idraulica-Gas Metano

Methacrylate- and PTFE-based anaerobic medium/high strength thread locker sealant

• Medium/high mechanical torque strength
• High viscosity - does not sag
• High temperature resistance between -50°C and +150°C
• Good chemical resistance

U-Bond Ultra 2K – 1 & 5 min

Plastic repair two-parts polyurethane adhesive

• Odorless and solvent free
• Extremely quick full curing
• Spot weldable before curing
• Convenient as gap filler. May be sanded and overpainted

U-Seal 207 SA

Special Adhesion AGR aftermarket one-part polyurethane direct glazing & structural bonding adhesive

• One-component polyurethane
• Solvent free, odorless
• Primerless to glass, ceramic frit and painted metal
• Short cut-off string
• Suitable for cold and warm application
• Outstanding thixotropy, good decking, non-sagging
• High Modulus - maintains torsional rigidity and increases the vehicles NVH values
• Capable of withstanding high dynamic stresses
• High UV, weathering and ageing resistance
• Suitable for use with integral aerials

Block Frenafiletti Medio

Methacrylate-based anaerobic medium strength thread locker sealant

• Medium mechanical torque strength
• Medium viscosity - does not sag
• High temperature resistance between -50°C and +150°C
• Good chemical resistance

Block Sigillante Verde per Piani

Methacrylate-based anaerobic thread locker sealant for flat surface, green

• Allows easy disassembly with common tools
• Functional resistance after 45 minutes

Block Liquidi

Methacrylate- and PTFE-based anaerobic medium strength thread locker sealant

• Medium mechanical torque strength
• High temperature resistance between -50°C and + 150°C
• Resistant to vibrations and shocks
• Good chemical resistance

Cleaner E

Professional industrial cleaner and remover

Glass Wipe Cleaner

Single use cleaner and remover wipe

Activator 400 NP

Adhesion promoter for non-porous substrates

• Plastics, fiberglass and other synthetic non-porous materials
• Painted surfaces and coatings (epoxy and polyester painted sheet steel)
• Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
• Float glass and ceramic coated (frit) glass

Brushable Seam Sealant

Car body repair one-part brushable seam sealant

• Cold applied
• Over-paintable, with many water and solvent based paints (preliminary tests recommended)
• Can be easily tooled, brushed and smoothed
• Corrosion protective

U-Seal 204 Speed

High decking, fast curing one-part polyurethane direct glazing & structural bonding adhesive. 1 hour Drive Away Time Compliant

• One-component polyurethane
• Solvent free, odorless
• Fast curing
• Suitable for cold and warm application
• Outstanding thixotropy, high decking, non-sagging
• High viscosity, high green strength
• High Modulus - maintains torsional rigidity and increases the vehicles NVH values
• Capable of withstanding high dynamic stresses
• Suitable for use with integral aerials

Activator 440 W

Adhesion promoter for primerless direct glazing applications

• Float glass and ceramic coated (frit) glass
• Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
• Painted surfaces and coatings (epoxy and polyester painted sheet steel)
• Original PU or MS adhesives cut surface for replacement