Automotive Aftermarket
General Industry
Mechanical repair
Sealing & Bonding
Return to: Industry

Block Liquidi

Methacrylate- and PTFE-based anaerobic medium strength thread locker sealant

Block Liquidi is a white colored medium torque strength anaerobic thread locker sealant formulated to block and seal threaded fittings and pipes. It is suitable to replace hemp and PTFE tapes forming an elastic film resistant to shock and vibration and sudden temperature variation guaranteeing a perfect seal with resistance for compressed air, water, hydrocarbons and chemicals. Good chemical resistance to water/glycol mixture, brake fluid, engine oil and acetone.

Certified and tested according to: DVGW DIN EN 751-1 GASTEK

DIN-54454: 80% conservation of unscrewing torque after 1000 hours  
  • Medium mechanical torque strength
  • High temperature resistance between -50°C and + 150°C
  • Resistant to vibrations and shocks
  • Good chemical resistance

There aren't downloads

There aren't other information

You might be interested in


  • Anaerobic blue adhesive

    Block Frenafiletti Medio
    Methacrylate-based anaerobic medium strength thread locker sealant

    • Medium mechanical torque strength
    • Medium viscosity - does not sag
    • High temperature resistance between -50°C and +150°C
    • Good chemical resistance

  • SiMP ADVANCED 70 UP
    Ultimate mechanical strength, primerless to glass one-part SiMP-Advanced elastic adhesive

    • SiMP-Advanced: ultimate mechanical performancesSilyl-Modified Polymer
    • Solvent and isocyanate free, odorless
    • Outstanding thixotropy, non-sagging, short cut-off string
    • High green strength: instant grab and load bearing capacity
    • High mechanical and dynamic stress resistance
    • Shock and impact resistance
    • Vibration and sound damping properties
    • Increase torsional stiffness of final assembly
    • Excellent primerless adhesion on all typical industrial materials and substrates
    • Non-staining. Neutral behavior, does not attack support surface
    • No Hazard symbol required
    • Permanently flexible over a wide range of temperatures
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
    • No bubble formation
  • anaerobic adhesive suitable for sealing standard mechanical connections

    Block Idraulica-Gas Metano
    Methacrylate- and PTFE-based anaerobic medium/high strength thread locker sealant

    • Medium/high mechanical torque strength
    • High viscosity - does not sag
    • High temperature resistance between -50°C and +150°C
    • Good chemical resistance
  • sealant - sili motor - self-levelling acetic silicone sealant

    Silimotor
    Self-levelling, one-part, acetoxy-curing, high temperature resistant RTV silicone gasket, red

    • Self-levelling, forms a tought rubber gasket seal
    • Withstands extreme temperature cycling, -60°C to 250°C (peaks up to 300 °C)
    • Resists oil, transmission fluids, water and antifreeze
    • Supports repeated heat/cold cycles
    • Easily applied, resistant within minutes

  • Cleaner E
    Professional industrial cleaner and remover

  • Placeholder

    U-Seal 207 SA
    Special Adhesion AGR aftermarket one-part polyurethane direct glazing & structural bonding adhesive

    • One-component polyurethane
    • Solvent free, odorless
    • Primerless to glass, ceramic frit and painted metal
    • Short cut-off string
    • Suitable for cold and warm application
    • Outstanding thixotropy, good decking, non-sagging
    • High Modulus - maintains torsional rigidity and increases the vehicles NVH values
    • Capable of withstanding high dynamic stresses
    • High UV, weathering and ageing resistance
    • Suitable for use with integral aerials

  • Glass Wipe Cleaner
    Single use cleaner and remover wipe


  • Activator 420 GL
    Adhesion promoter for glass and non-porous substrates

    • Float glass and ceramic coated (frit) glass
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Original PU or MS adhesives cut surface for replacement
    • Plastics

  • U-Seal 204 Speed
    High decking, fast curing one-part polyurethane direct glazing & structural bonding adhesive. 1 hour Drive Away Time Compliant

    • One-component polyurethane
    • Solvent free, odorless
    • Fast curing
    • Suitable for cold and warm application
    • Outstanding thixotropy, high decking, non-sagging
    • High viscosity, high green strength
    • High Modulus - maintains torsional rigidity and increases the vehicles NVH values
    • Capable of withstanding high dynamic stresses
    • Suitable for use with integral aerials

  • SiMP-Seal 650
    Multipurpose one-part SiMP elastic adhesive and sealant. Completely odorless and very low emissions

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free. No Hazard symbol required
    • Emicode EC1 certified with very low emission, thanks to its specific formulation
    • Completely odorless
    • Excellent resistance to ageing and weathering
    • Completely color stable
    • White color as pure and non-yellowish
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Neutral behavior, does not attack support surface
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
    • Short time resistant up to +180 °C for powder and thermal coating

  • Sigill Block Display Kit
    A set of SIGILL BLOCK anaerobic sealants counting 21 units


  • SiMP Fix Crystal
    One-part SiMP crystal clear elastic adhesive and sealant

    • Crystal clear
    • Excellent resistance to ageing, weathering; color stable, non-yellowing and non-chalking
    • Environmentally friendly – Free of isocyanates and solvents
    • No hazard symbol required
    • No bubble formation - Odorless
    • Bonds and seals at the same time
    • Permanently elastic
    • Easy to gun with excellent tooling consistency
    • Exceptional thixotropy, non-sagging, short cut off string
    • No change in volume, no shrinkage
    • Good primerless adhesion on all typical construction and industrial materials
    • Non-staining on concrete and porous materials

  • Activator 400 NP
    Adhesion promoter for non-porous substrates

    • Plastics, fiberglass and other synthetic non-porous materials
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Float glass and ceramic coated (frit) glass

  • Silgasket Grey/Black
    One-part, neutral oxime-curing, high temperature resistant RTV grey or black silicone gasket in pressure pack

    • No caulking gun required
    • Resists sagging and slumping when applied overhead or on sidewall joints
    • Double piston pressurized can - Allows for smoother, effortless application
    • Special nozzle, allows the user to control the width of the bead 
    • Forms a tough rubber gasket seal
    • Withstands extreme temperature cycling, -60°C to 250°C (peaks up to 300 °C)
    • Resists oil, transmission fluids, water and antifreeze
    • Supports repeated heat/cold cycles
    • Easily applied, resistant within minutes
  • automotive industry adhesive, U-BOND ULTRA 2K 5MIN 50ML

    U-Bond Ultra 2K – 1 & 5 min
    Plastic repair two-parts polyurethane adhesive

    • Odorless and solvent free
    • Extremely quick full curing
    • Spot weldable before curing
    • Convenient as gap filler. May be sanded and overpainted
  • Placeholder

    S Bond W4


  • Activator 440 W
    Adhesion promoter for primerless direct glazing applications

    • Float glass and ceramic coated (frit) glass
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Original PU or MS adhesives cut surface for replacement

  • SiMP-Seal 640
    Multipurpose, wide spectrum adhesion one-part SiMP elastic adhesive and sealant

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free
    • Excellent resistance to ageing and weathering; color stable and non-yellowing
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Neutral behavior, does not attack support surface
    • No Hazard symbol required
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)

  • Siliblack
    Paste, one-part, acetoxy-curing, high temperature resistant RTV silicone gasket, black

    • Forms a tough rubber gasket seal
    • Will not slump in overhead or vertical applications
    • Withstands extreme temperature cycling, -60°C to 250°C (peaks up to 300 °C)
    • Resists oils, transimission fluids, water and antifreeze
    • Supports repeated heat/cold cycles
    • Easily applied, resistant within minutes

  • Silgasket Red
    One-part, acetoxy-curing, high temperature resistant RTV red silicone gasket in pressure pack

    • No caulking gun required
    • Resists sagging and slumping when applied overhead or on sidewall joints
    • Double piston pressurized can - Allows for smoother, effortless application
    • Special nozzle, allows the user to control the width of the bead 
    • Forms a tough rubber gasket seal
    • Withstands extreme temperature cycling, -60°C to 250°C (peaks up to 300 °C)
    • Resists oil, transmission fluids, water and antifreeze
    • Supports repeated heat/cold cycles
    • Easily applied, resistant within minutes
  • automotive adhesive, seals on moulded motor parts, BLOCK SIGILLANTE VERDE PER PIANI 60ML

    Block Sigillante Verde per Piani
    Methacrylate-based anaerobic thread locker sealant for flat surface, green

    • Allows easy disassembly with common tools
    • Functional resistance after 45 minutes

  • Red RTV Gasket
    One-part, acetoxy-curing, high temperature resistant RTV silicone gasket, red

    • Forms a tough rubber gasket seal
    • Will not slump in overhead or vertical applications
    • Withstands extreme temperature cycling, -40°C to 250°C
    • Resists oils, transmission fluids, water and antifreeze
    • Supports repeated heat/cold cycles
    • Easily applied, resistant within minutes

  • U-Bond Ultra 2K Assembly
    Structural assembly two-parts polyurethane adhesive

    • Odorless and solvent free
    • Extremely quick grip and curing
    • Spot weldable before curing
    • May be sanded or overpainted

  • G+S Cleaner
    Professional foam cleaning agent

    • Active formula aggressive on contaminants
    • Foaming action allow to identify contaminant areas
    • Spray-on/wipe-off foam
    • Does not run
    • Fast dying and residue-free action
    • Efficient as cutout lubricant
    • Efficient as smoothing agent for beading, leaving no traces
    • Efficient as dry cleaner for external body parts and internal upholstery and cockpit
  • Placeholder

    Brushable Seam Sealant
    Car body repair one-part brushable seam sealant

    • Cold applied
    • Over-paintable, with many water and solvent based paints (preliminary tests recommended)
    • Can be easily tooled, brushed and smoothed
    • Corrosion protective