Automotive Aftermarket
Mechanical repair
Return to: Industry

Block Sigillante Verde per Piani

Methacrylate-based anaerobic thread locker sealant for flat surface, green

Block Sigillante Verde is a green colored anaerobic thread locker sealant designed to seal flat surfaces and flanged junctions. Suitable to seal pumps, gear boxes, transmissions, differential gears and engine flanges. It creates an elastic film resistant to vibrations, heat and aggressive agents like industrial oils and fluids, hydrocarbon gasses and water.

Certified and Tested according to: DVGW DIN EN 751-1
  • Allows easy disassembly with common tools
  • Functional resistance after 45 minutes

There aren't downloads

There aren't other information

You might be interested in


  • Anaerobic adhesive BLOCK PER LIQUIDI 60ML

    Block Liquidi
    Methacrylate- and PTFE-based anaerobic medium strength thread locker sealant

    • Medium mechanical torque strength
    • High temperature resistance between -50°C and + 150°C
    • Resistant to vibrations and shocks
    • Good chemical resistance

  • Glass Wipe Cleaner
    Single use cleaner and remover wipe


  • Sigill Block Display Kit
    A set of SIGILL BLOCK anaerobic sealants counting 21 units


  • Silgasket Red
    One-part, acetoxy-curing, high temperature resistant RTV red silicone gasket in pressure pack

    • No caulking gun required
    • Resists sagging and slumping when applied overhead or on sidewall joints
    • Double piston pressurized can - Allows for smoother, effortless application
    • Special nozzle, allows the user to control the width of the bead 
    • Forms a tough rubber gasket seal
    • Withstands extreme temperature cycling, -60°C to 250°C (peaks up to 300 °C)
    • Resists oil, transmission fluids, water and antifreeze
    • Supports repeated heat/cold cycles
    • Easily applied, resistant within minutes

  • Activator 400 NP
    Adhesion promoter for non-porous substrates

    • Plastics, fiberglass and other synthetic non-porous materials
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Float glass and ceramic coated (frit) glass
  • anaerobic adhesive suitable for sealing standard mechanical connections

    Block Idraulica-Gas Metano
    Methacrylate- and PTFE-based anaerobic medium/high strength thread locker sealant

    • Medium/high mechanical torque strength
    • High viscosity - does not sag
    • High temperature resistance between -50°C and +150°C
    • Good chemical resistance

  • Activator 420 GL
    Adhesion promoter for glass and non-porous substrates

    • Float glass and ceramic coated (frit) glass
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Original PU or MS adhesives cut surface for replacement
    • Plastics

  • SiMP ADVANCED 70 UP
    FEATURES

    • SiMP-Advanced: ultimate mechanical performancesSilyl-Modified Polymer
    • Solvent and isocyanate free, odorless
    • Outstanding thixotropy, non-sagging, short cut-off string
    • High green strength: instant grab and load bearing capacity
    • High mechanical and dynamic stress resistance
    • Shock and impact resistance
    • Vibration and sound damping properties
    • Increase torsional stiffness of final assembly
    • Excellent primerless adhesion on all typical industrial materials and substrates
    • Non-staining. Neutral behavior, does not attack support surface
    • No Hazard symbol required
    • Permanently flexible over a wide range of temperatures
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
    • No bubble formation
  • automotive industry adhesive, U-BOND ULTRA 2K 5MIN 50ML

    U-Bond Ultra 2K – 1 & 5 min
    Plastic repair two-parts polyurethane adhesive

    • Odorless and solvent free
    • Extremely quick full curing
    • Spot weldable before curing
    • Convenient as gap filler. May be sanded and overpainted
  • sealant automotive industry - RED RTV 2020

    Red RTV Gasket
    One-part, acetoxy-curing, high temperature resistant RTV silicone gasket, red

    • Forms a tough rubber gasket seal
    • Will not slump in overhead or vertical applications
    • Withstands extreme temperature cycling, -40°C to 250°C
    • Resists oils, transmission fluids, water and antifreeze
    • Supports repeated heat/cold cycles
    • Easily applied, resistant within minutes

  • U-Seal 204 Speed
    High decking, fast curing one-part polyurethane direct glazing & structural bonding adhesive. 1 hour Drive Away Time Compliant

    • One-component polyurethane
    • Solvent free, odorless
    • Fast curing
    • Suitable for cold and warm application
    • Outstanding thixotropy, high decking, non-sagging
    • High viscosity, high green strength
    • High Modulus - maintains torsional rigidity and increases the vehicles NVH values
    • Capable of withstanding high dynamic stresses
    • Suitable for use with integral aerials

  • U-Bond Ultra 2K Assembly
    Structural assembly two-parts polyurethane adhesive

    • Odorless and solvent free
    • Extremely quick grip and curing
    • Spot weldable before curing
    • May be sanded or overpainted
  • Placeholder

    U-Seal 207 SA
    Special Adhesion AGR aftermarket one-part polyurethane direct glazing & structural bonding adhesive

    • One-component polyurethane
    • Solvent free, odorless
    • Primerless to glass, ceramic frit and painted metal
    • Short cut-off string
    • Suitable for cold and warm application
    • Outstanding thixotropy, good decking, non-sagging
    • High Modulus - maintains torsional rigidity and increases the vehicles NVH values
    • Capable of withstanding high dynamic stresses
    • High UV, weathering and ageing resistance
    • Suitable for use with integral aerials

  • Activator 440 W
    Adhesion promoter for primerless direct glazing applications

    • Float glass and ceramic coated (frit) glass
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Original PU or MS adhesives cut surface for replacement
  • sealant - sili motor - self-levelling acetic silicone sealant

    Silimotor
    Self-levelling, one-part, acetoxy-curing, high temperature resistant RTV silicone gasket, red

    • Self-levelling, forms a tought rubber gasket seal
    • Withstands extreme temperature cycling, -60°C to 250°C (peaks up to 300 °C)
    • Resists oil, transmission fluids, water and antifreeze
    • Supports repeated heat/cold cycles
    • Easily applied, resistant within minutes

  • G+S Cleaner
    Professional foam cleaning agent

    • Active formula aggressive on contaminants
    • Foaming action allow to identify contaminant areas
    • Spray-on/wipe-off foam
    • Does not run
    • Fast dying and residue-free action
    • Efficient as cutout lubricant
    • Efficient as smoothing agent for beading, leaving no traces
    • Efficient as dry cleaner for external body parts and internal upholstery and cockpit
  • Anaerobic blue adhesive

    Block Frenafiletti Medio
    Methacrylate-based anaerobic medium strength thread locker sealant

    • Medium mechanical torque strength
    • Medium viscosity - does not sag
    • High temperature resistance between -50°C and +150°C
    • Good chemical resistance
  • Placeholder

    Brushable Seam Sealant
    Car body repair one-part brushable seam sealant

    • Cold applied
    • Over-paintable, with many water and solvent based paints (preliminary tests recommended)
    • Can be easily tooled, brushed and smoothed
    • Corrosion protective

  • Silgasket Grey/Black
    One-part, neutral oxime-curing, high temperature resistant RTV grey or black silicone gasket in pressure pack

    • No caulking gun required
    • Resists sagging and slumping when applied overhead or on sidewall joints
    • Double piston pressurized can - Allows for smoother, effortless application
    • Special nozzle, allows the user to control the width of the bead 
    • Forms a tough rubber gasket seal
    • Withstands extreme temperature cycling, -60°C to 250°C (peaks up to 300 °C)
    • Resists oil, transmission fluids, water and antifreeze
    • Supports repeated heat/cold cycles
    • Easily applied, resistant within minutes

  • Cleaner E
    Professional industrial cleaner and remover


  • Siliblack
    Paste, one-part, acetoxy-curing, high temperature resistant RTV silicone gasket, black

    • Forms a tough rubber gasket seal
    • Will not slump in overhead or vertical applications
    • Withstands extreme temperature cycling, -60°C to 250°C (peaks up to 300 °C)
    • Resists oils, transimission fluids, water and antifreeze
    • Supports repeated heat/cold cycles
    • Easily applied, resistant within minutes