Automotive Aftermarket
Mechanical repair
Return to: Industry

Red RTV Gasket

One-part, acetoxy-curing, high temperature resistant RTV silicone gasket, red

Red RTV Gasket is a non-slumping, low volatile, single component, room temperature vulcanising (RTV) silicone gasket sealant. Designed primarily for flange sealing with good oil resistance and to withstand high joint-movement requirements. For example, stamped sheet metal covers (timing covers and oil pumps).
  • Forms a tough rubber gasket seal
  • Will not slump in overhead or vertical applications
  • Withstands extreme temperature cycling, -40°C to 250°C
  • Resists oils, transmission fluids, water and antifreeze
  • Supports repeated heat/cold cycles
  • Easily applied, resistant within minutes

There aren't downloads

There aren't other information

You might be interested in


  • Anaerobic blue adhesive

    Block Frenafiletti Medio
    Methacrylate-based anaerobic medium strength thread locker sealant

    • Medium mechanical torque strength
    • Medium viscosity - does not sag
    • High temperature resistance between -50°C and +150°C
    • Good chemical resistance
  • Placeholder

    Brushable Seam Sealant
    Car body repair one-part brushable seam sealant

    • Cold applied
    • Over-paintable, with many water and solvent based paints (preliminary tests recommended)
    • Can be easily tooled, brushed and smoothed
    • Corrosion protective
  • Placeholder

    U-Seal 207 SA
    Special Adhesion AGR aftermarket one-part polyurethane direct glazing & structural bonding adhesive

    • One-component polyurethane
    • Solvent free, odorless
    • Primerless to glass, ceramic frit and painted metal
    • Short cut-off string
    • Suitable for cold and warm application
    • Outstanding thixotropy, good decking, non-sagging
    • High Modulus - maintains torsional rigidity and increases the vehicles NVH values
    • Capable of withstanding high dynamic stresses
    • High UV, weathering and ageing resistance
    • Suitable for use with integral aerials

  • U-Bond Ultra 2K Assembly
    Structural assembly two-parts polyurethane adhesive

    • Odorless and solvent free
    • Extremely quick grip and curing
    • Spot weldable before curing
    • May be sanded or overpainted

  • Cleaner E
    Professional industrial cleaner and remover

  • sealant - sili motor - self-levelling acetic silicone sealant

    Silimotor
    Self-levelling, one-part, acetoxy-curing, high temperature resistant RTV silicone gasket, red

    • Self-levelling, forms a tought rubber gasket seal
    • Withstands extreme temperature cycling, -60°C to 250°C (peaks up to 300 °C)
    • Resists oil, transmission fluids, water and antifreeze
    • Supports repeated heat/cold cycles
    • Easily applied, resistant within minutes
  • automotive sealant, SILGASKET RED

    Silgasket Red
    One-part, acetoxy-curing, high temperature resistant RTV red silicone gasket in pressure pack

    • No caulking gun required
    • Resists sagging and slumping when applied overhead or on sidewall joints
    • Double piston pressurized can - Allows for smoother, effortless application
    • Special nozzle, allows the user to control the width of the bead 
    • Forms a tough rubber gasket seal
    • Withstands extreme temperature cycling, -60°C to 250°C (peaks up to 300 °C)
    • Resists oil, transmission fluids, water and antifreeze
    • Supports repeated heat/cold cycles
    • Easily applied, resistant within minutes

  • Glass Wipe Cleaner
    Single use cleaner and remover wipe


  • G+S Cleaner
    Professional foam cleaning agent

    • Active formula aggressive on contaminants
    • Foaming action allow to identify contaminant areas
    • Spray-on/wipe-off foam
    • Does not run
    • Fast dying and residue-free action
    • Efficient as cutout lubricant
    • Efficient as smoothing agent for beading, leaving no traces
    • Efficient as dry cleaner for external body parts and internal upholstery and cockpit
  • Anaerobic adhesive BLOCK PER LIQUIDI 60ML

    Block Liquidi
    Methacrylate- and PTFE-based anaerobic medium strength thread locker sealant

    • Medium mechanical torque strength
    • High temperature resistance between -50°C and + 150°C
    • Resistant to vibrations and shocks
    • Good chemical resistance
  • automotive adhesive, seals on moulded motor parts, BLOCK SIGILLANTE VERDE PER PIANI 60ML

    Block Sigillante Verde per Piani
    Methacrylate-based anaerobic thread locker sealant for flat surface, green

    • Allows easy disassembly with common tools
    • Functional resistance after 45 minutes

  • Activator 420 GL
    Adhesion promoter for glass and non-porous substrates

    • Float glass and ceramic coated (frit) glass
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Original PU or MS adhesives cut surface for replacement
    • Plastics

  • U-Seal 204 Speed
    High decking, fast curing one-part polyurethane direct glazing & structural bonding adhesive. 1 hour Drive Away Time Compliant

    • One-component polyurethane
    • Solvent free, odorless
    • Fast curing
    • Suitable for cold and warm application
    • Outstanding thixotropy, high decking, non-sagging
    • High viscosity, high green strength
    • High Modulus - maintains torsional rigidity and increases the vehicles NVH values
    • Capable of withstanding high dynamic stresses
    • Suitable for use with integral aerials

  • Activator 440 W
    Adhesion promoter for primerless direct glazing applications

    • Float glass and ceramic coated (frit) glass
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Original PU or MS adhesives cut surface for replacement

  • Sigill Block Display Kit
    A set of SIGILL BLOCK anaerobic sealants counting 21 units

  • anaerobic adhesive suitable for sealing standard mechanical connections

    Block Idraulica-Gas Metano
    Methacrylate- and PTFE-based anaerobic medium/high strength thread locker sealant

    • Medium/high mechanical torque strength
    • High viscosity - does not sag
    • High temperature resistance between -50°C and +150°C
    • Good chemical resistance

  • SiMP ADVANCED 70 UP
    FEATURES

    • SiMP-Advanced: ultimate mechanical performancesSilyl-Modified Polymer
    • Solvent and isocyanate free, odorless
    • Outstanding thixotropy, non-sagging, short cut-off string
    • High green strength: instant grab and load bearing capacity
    • High mechanical and dynamic stress resistance
    • Shock and impact resistance
    • Vibration and sound damping properties
    • Increase torsional stiffness of final assembly
    • Excellent primerless adhesion on all typical industrial materials and substrates
    • Non-staining. Neutral behavior, does not attack support surface
    • No Hazard symbol required
    • Permanently flexible over a wide range of temperatures
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
    • No bubble formation
  • automotive industry adhesive, U-BOND ULTRA 2K 5MIN 50ML

    U-Bond Ultra 2K – 1 & 5 min
    Plastic repair two-parts polyurethane adhesive

    • Odorless and solvent free
    • Extremely quick full curing
    • Spot weldable before curing
    • Convenient as gap filler. May be sanded and overpainted
  • automotive sealant. For sealing joints to replace any preformed traditional gasket

    Silgasket Grey/Black
    One-part, neutral oxime-curing, high temperature resistant RTV grey or black silicone gasket in pressure pack

    • No caulking gun required
    • Resists sagging and slumping when applied overhead or on sidewall joints
    • Double piston pressurized can - Allows for smoother, effortless application
    • Special nozzle, allows the user to control the width of the bead 
    • Forms a tough rubber gasket seal
    • Withstands extreme temperature cycling, -60°C to 250°C (peaks up to 300 °C)
    • Resists oil, transmission fluids, water and antifreeze
    • Supports repeated heat/cold cycles
    • Easily applied, resistant within minutes
  • auto body sealant, automotive sealant, SILIBLACK

    Siliblack
    Paste, one-part, acetoxy-curing, high temperature resistant RTV silicone gasket, black

    • Forms a tough rubber gasket seal
    • Will not slump in overhead or vertical applications
    • Withstands extreme temperature cycling, -60°C to 250°C (peaks up to 300 °C)
    • Resists oils, transimission fluids, water and antifreeze
    • Supports repeated heat/cold cycles
    • Easily applied, resistant within minutes

  • Activator 400 NP
    Adhesion promoter for non-porous substrates

    • Plastics, fiberglass and other synthetic non-porous materials
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Float glass and ceramic coated (frit) glass