Automotive Aftermarket
General Industry
Mechanical repair
Sealing & Bonding
Return to: Industry

Black RTV Gasket

One-part, acetoxy-curing, high temperature resistant RTV silicone gasket, black

Black RTV Gasket is a non-slumping, low volatile, single component, room temperature vulcanising (RTV) silicone gasket sealant. Designed primarily for flange sealing with good oil resistance and to withstand high joint-movement requirements. For example, stamped sheet metal covers (timing covers and oil pumps).   
  • Forms a tough rubber gasket seal
  • Will not slump in overhead or vertical applications
  • Withstands extreme temperature cycling, -40°C to 250°C
  • Resists oil, transmission fluids, water and antifreeze
  • Supports repeated heat/cold cycles
  • Easily applied, resistant within minutes

There aren't downloads

There aren't other information

You might be interested in



  • G+S Cleaner
    Professional foam cleaning agent

    • Active formula aggressive on contaminants
    • Foaming action allow to identify contaminant areas
    • Spray-on/wipe-off foam
    • Does not run
    • Fast dying and residue-free action
    • Efficient as cutout lubricant
    • Efficient as smoothing agent for beading, leaving no traces
    • Efficient as dry cleaner for external body parts and internal upholstery and cockpit
  • Placeholder

    Activator 420 GL
    Adhesion promoter for glass and non-porous substrates

    • Float glass and ceramic coated (frit) glass
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Original PU or MS adhesives cut surface for replacement
    • Plastics
  • Placeholder

    U-Seal 204 Speed
    High decking, fast curing one-part polyurethane direct glazing & structural bonding adhesive. 1 hour Drive Away Time Compliant

    • One-component polyurethane
    • Solvent free, odorless
    • Fast curing
    • Suitable for cold and warm application
    • Outstanding thixotropy, high decking, non-sagging
    • High viscosity, high green strength
    • High Modulus - maintains torsional rigidity and increases the vehicles NVH values
    • Capable of withstanding high dynamic stresses
    • Suitable for use with integral aerials
  • Anaerobic blue adhesive

    Block Frenafiletti Medio
    Methacrylate-based anaerobic medium strength thread locker sealant

    • Medium mechanical torque strength
    • Medium viscosity - does not sag
    • High temperature resistance between -50°C and +150°C
    • Good chemical resistance
  • sealant automotive industry - RED RTV 2020

    Red RTV Gasket
    One-part, acetoxy-curing, high temperature resistant RTV silicone gasket, red

    • Forms a tough rubber gasket seal
    • Will not slump in overhead or vertical applications
    • Withstands extreme temperature cycling, -40°C to 250°C
    • Resists oils, transmission fluids, water and antifreeze
    • Supports repeated heat/cold cycles
    • Easily applied, resistant within minutes
  • Placeholder

    SiMP-Seal 45 UV
    Highly UV and weather resistant one-part SiMP elastic adhesive and sealant

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free, odourless
    • Extremely high UV, ageing and weather resistance
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No change in volume – No shrinkage
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Non-staining. Neutral behavior, does not attack support surface
    • No Hazard symbol required
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
  • Placeholder

    SiMP 2K Fast

    • Privo di solventi ed isocianati
    • Tempo aperto 4 min a 23°C - 50%UR
    • Tempo di presa 30 min
    • Perfettamente flessibile
    • Sovraverniciabile con vernici a base solvente e a base acqua
  • Anaerobic adhesive BLOCK PER LIQUIDI 60ML

    Block Liquidi
    Methacrylate- and PTFE-based anaerobic medium strength thread locker sealant

    • Medium mechanical torque strength
    • High temperature resistance between -50°C and + 150°C
    • Resistant to vibrations and shocks
    • Good chemical resistance

  • Sigill Block Display Kit
    A set of SIGILL BLOCK anaerobic sealants counting 21 units

  • Placeholder

    S Bond W4

  • Placeholder

    Activator 440 W
    Adhesion promoter for primerless direct glazing applications

    • Float glass and ceramic coated (frit) glass
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Original PU or MS adhesives cut surface for replacement
  • primer

    Felt Applicator


  • U-Seal 550FC
    High thixotropy, fast curing one-part polyurethane elastic adhesive and sealant, which is PVC-free and odorless

    • One-component polyurethane
    • Cold applied
    • Wide spectrum of adhesion
    • Non-sag, exceptional thixotropy and short cut-off string
    • Bonds and seals at the same time
    • Very fast curing through volume
    • Over-paintable, even in a short time, with many water and solvent based paints (preliminary tests recommended)
    • Can be easily tooled, brushed and smoothed
    • Capable of withstanding high dynamic stresses
    • Permanently flexible
    • Vibration and sound dampening properties
  • Placeholder

    SiMP-Seal 650
    Multipurpose one-part SiMP elastic adhesive and sealant. Completely odorless and very low emissions

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free. No Hazard symbol required
    • Emicode EC1 certified with very low emission, thanks to its specific formulation
    • Completely odorless
    • Excellent resistance to ageing and weathering
    • Completely color stable
    • White color as pure and non-yellowish
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Neutral behavior, does not attack support surface
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
    • Short time resistant up to +180 °C for powder and thermal coating

  • SiMP-Seal 640
    Multipurpose, wide spectrum adhesion one-part SiMP elastic adhesive and sealant

    • SiMP Silyl-Modified Polymer
    • Solvent and isocyanate free
    • Excellent resistance to ageing and weathering; color stable and non-yellowing
    • Outstanding thixotropy, non-sagging, short cut-off string
    • Permanently flexible over a wide range of temperatures
    • No bubble formation
    • Easy to gun with excellent tooling consistency
    • Excellent primerless adhesion on all typical construction and industrial materials and substrates
    • Neutral behavior, does not attack support surface
    • No Hazard symbol required
    • Over-paintable with many water and solvent based paints (preliminary tests recommended)
  • sealant - sili motor - self-levelling acetic silicone sealant

    Silimotor
    Self-levelling, one-part, acetoxy-curing, high temperature resistant RTV silicone gasket, red

    • Self-levelling, forms a tought rubber gasket seal
    • Withstands extreme temperature cycling, -60°C to 250°C (peaks up to 300 °C)
    • Resists oil, transmission fluids, water and antifreeze
    • Supports repeated heat/cold cycles
    • Easily applied, resistant within minutes
  • automotive sealant. For sealing joints to replace any preformed traditional gasket

    Silgasket Grey/Black
    One-part, neutral oxime-curing, high temperature resistant RTV grey or black silicone gasket in pressure pack

    • No caulking gun required
    • Resists sagging and slumping when applied overhead or on sidewall joints
    • Double piston pressurized can - Allows for smoother, effortless application
    • Special nozzle, allows the user to control the width of the bead 
    • Forms a tough rubber gasket seal
    • Withstands extreme temperature cycling, -60°C to 250°C (peaks up to 300 °C)
    • Resists oil, transmission fluids, water and antifreeze
    • Supports repeated heat/cold cycles
    • Easily applied, resistant within minutes
  • Placeholder

    Brushable Seam Sealant
    Car body repair one-part brushable seam sealant

    • Cold applied
    • Over-paintable, with many water and solvent based paints (preliminary tests recommended)
    • Can be easily tooled, brushed and smoothed
    • Corrosion protective
  • Placeholder

    U-Seal 207 SA
    Special Adhesion AGR aftermarket one-part polyurethane direct glazing & structural bonding adhesive

    • One-component polyurethane
    • Solvent free, odorless
    • Primerless to glass, ceramic frit and painted metal
    • Short cut-off string
    • Suitable for cold and warm application
    • Outstanding thixotropy, good decking, non-sagging
    • High Modulus - maintains torsional rigidity and increases the vehicles NVH values
    • Capable of withstanding high dynamic stresses
    • High UV, weathering and ageing resistance
    • Suitable for use with integral aerials
  • Placeholder

    SiMP Crystal
    One-part SiMP crystal clear elastic adhesive and sealant

    • Crystal clear
    • Excellent resistance to ageing, weathering; color stable, non-yellowing and non-chalking
    • Environmentally friendly – Free of isocyanates and solvents
    • No hazard symbol required
    • No bubble formation - Odorless
    • Bonds and seals at the same time 
    • Permanently elastic
    • Easy to gun with excellent tooling consistency
    • Exceptional thixotropy, non-sagging, short cut off string
    • No change in volume, no shrinkage
    • Good primerless adhesion on all typical construction and industrial materials
    • Non-staining on concrete and porous materials
  • auto body sealant, automotive sealant, SILIBLACK

    Siliblack
    Paste, one-part, acetoxy-curing, high temperature resistant RTV silicone gasket, black

    • Forms a tough rubber gasket seal
    • Will not slump in overhead or vertical applications
    • Withstands extreme temperature cycling, -60°C to 250°C (peaks up to 300 °C)
    • Resists oils, transimission fluids, water and antifreeze
    • Supports repeated heat/cold cycles
    • Easily applied, resistant within minutes
  • Placeholder

    Activator 400 NP
    Adhesion promoter for non-porous substrates

    • Plastics, fiberglass and other synthetic non-porous materials
    • Painted surfaces and coatings (epoxy and polyester painted sheet steel)
    • Metals such as steel, stainless steel, aluminum, copper, electrogalvanized steel, etc.
    • Float glass and ceramic coated (frit) glass
  • automotive adhesive, seals on moulded motor parts, BLOCK SIGILLANTE VERDE PER PIANI 60ML

    Block Sigillante Verde per Piani
    Methacrylate-based anaerobic thread locker sealant for flat surface, green

    • Allows easy disassembly with common tools
    • Functional resistance after 45 minutes
  • Placeholder

    Cleaner E
    Professional industrial cleaner and remover

  • Placeholder

    Glass Wipe Cleaner
    Single use cleaner and remover wipe

  • automotive sealant, SILGASKET RED

    Silgasket Red
    One-part, acetoxy-curing, high temperature resistant RTV red silicone gasket in pressure pack

    • No caulking gun required
    • Resists sagging and slumping when applied overhead or on sidewall joints
    • Double piston pressurized can - Allows for smoother, effortless application
    • Special nozzle, allows the user to control the width of the bead 
    • Forms a tough rubber gasket seal
    • Withstands extreme temperature cycling, -60°C to 250°C (peaks up to 300 °C)
    • Resists oil, transmission fluids, water and antifreeze
    • Supports repeated heat/cold cycles
    • Easily applied, resistant within minutes
  • anaerobic adhesive suitable for sealing standard mechanical connections

    Block Idraulica-Gas Metano
    Methacrylate- and PTFE-based anaerobic medium/high strength thread locker sealant

    • Medium/high mechanical torque strength
    • High viscosity - does not sag
    • High temperature resistance between -50°C and +150°C
    • Good chemical resistance